TL082CDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT1	output	Output of op-amp channel 1. Short-circuit protected; can swing typically ±12 V with RL = 2 kΩ on ±15 V supplies.
2	IN1-	input	Inverting input of op-amp channel 1. High-impedance JFET input (~10^12 Ω) with low bias current (~20 pA typ.).
3	IN1+	input	Non-inverting input of op-amp channel 1. High-impedance JFET input; common-mode range up to VCC+.
4	VCC-	power_in	Negative supply rail (or ground in single-supply operation). Supply span VCC+ − VCC− is 6 V to 36 V (±3 V to ±18 V split).
5	IN2+	input	Non-inverting input of op-amp channel 2. High-impedance JFET input; common-mode range up to VCC+.
6	IN2-	input	Inverting input of op-amp channel 2. High-impedance JFET input with low bias current (~20 pA typ.).
7	OUT2	output	Output of op-amp channel 2. Short-circuit protected; typical output swing ±12 V with RL = 2 kΩ on ±15 V supplies.
8	VCC+	power_in	Positive supply rail. Absolute maximum ±18 V (36 V total); operating range 6 V to 36 V total supply. Typical quiescent current 1.4 mA (no load).

Key specifications

Parameter	Value
Manufacturer	STMicroelectronics
Package	SO-8
Category	Op-amp/Cmp
Pins	8

Ordering variants

Same part, different packaging or reel option.

TL082CDTD
TL082CDT
TL082CDTN
TL082CDTP
TL082CDTPT

CAD (KiCad official)

Symbol: TL082CDT
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SO-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`tl082cdt.step`	122 KB	You want the bare part, or you mark your own boards.
`tl082cdt-etched.step`	1.7 MB	You want the part with `TL082CDT` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 424 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: STMicroelectronics datasheet (17 pp, sha256 bddb0c4be90667ce, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF