3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSG-8018CE 8.192000MHz TJHSA
Seiko Epson · Programmable Oscillators · SMD3225-4P
SG-8018CE 8.192000MHz TJHSA from Seiko Epson, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ST | input | Active-low standby input for this variant (the 'S' function code in the MPN): high gives the specified frequency on OUT, while low forces OUT low through a weak pull-down and puts the device in standby with supply current reduced to I_std (1.1 µA typ. at +25 °C, 2.5 µA max. at +105 °C). |
| 2 | GND | power_in | Power ground; a 0.1 µF capacitor between VCC and GND should be placed on the device side of the PCB as close to the device as possible with short wiring for optimum jitter performance. |
| 3 | OUT | output | CMOS clock output at the programmed frequency (0.67 MHz to 170 MHz), with a 15 pF maximum load and 10 % / 90 % VCC output levels. |
| 4 | VCC | power_in | Power supply input; the rated range is 1.62 V to 3.63 V, and this T-coded variant is specified for 1.8 V to 3.3 V typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD3225-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (rated range) | VCC | 1.62 | 3.63 | V | 1 | ||
| Output frequency range | fO | 0.67 | 170 | MHz | 1 | ||
| Operating temperature | T_use | -40 | 105 | ºC | 1 | ||
| Storage temperature | T_stg | -40 | 125 | ºC | Storage as single product. | 1 | |
| Frequency tolerance | f_tol | -50 | 50 | ×10-6 | T_use = -40 ºC ~ +105 ºC; includes initial tolerance, temperature, supply voltage, reflow, load drift and aging (+25 ºC, 10 years) | 1 | |
| Current consumption, VCC 1.62 V ~ 1.98 V | ICC | 3.2 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption, VCC 1.98 V ~ 2.20 V | ICC | 3.3 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption, VCC 2.20 V ~ 2.80 V | ICC | 3.4 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption, VCC 2.70 V ~ 3.63 V | ICC | 3.5 | mA | T_use = +105 ºC; No load, fO = 20 MHz | 1 | ||
| Current consumption at 170 MHz, VCC 1.62 V ~ 1.98 V | ICC | 5.5 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 | ||
| Current consumption at 170 MHz, VCC 1.98 V ~ 2.20 V | ICC | 5.8 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 | ||
| Current consumption at 170 MHz, VCC 2.20 V ~ 2.80 V | ICC | 6.7 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 | ||
| Current consumption at 170 MHz, VCC 2.70 V ~ 3.63 V | ICC | 8.1 | mA | T_use = +105 ºC; No load, fO = 170 MHz | 1 | ||
| Output disable current, VCC 1.62 V ~ 1.98 V | I_dis | 3.2 | mA | OE = GND, fO = 170 MHz | 1 | ||
| Output disable current, VCC 1.98 V ~ 2.20 V | I_dis | 3.2 | mA | OE = GND, fO = 170 MHz | 1 | ||
| Output disable current, VCC 2.20 V ~ 2.80 V | I_dis | 3.3 | mA | OE = GND, fO = 170 MHz | 1 | ||
| Output disable current, VCC 2.70 V ~ 3.63 V | I_dis | 3.5 | mA | OE = GND, fO = 170 MHz | 1 | ||
| Standby current, VCC 1.62 V ~ 1.98 V | I_std | 0.9 | μA | T_use = +105 ºC; ST = GND | 1 | ||
| Standby current, VCC 1.98 V ~ 2.20 V | I_std | 1 | μA | T_use = +105 ºC; ST = GND | 1 | ||
| Standby current, VCC 2.20 V ~ 2.80 V | I_std | 1.5 | μA | T_use = +105 ºC; ST = GND | 1 | ||
| Standby current, VCC 2.70 V ~ 3.63 V | I_std | 2.5 | μA | T_use = +105 ºC; ST = GND | 1 | ||
| Symmetry | SYM | 45 | 55 | % | 50 % VCC level | 1 | |
| Output high voltage | VOH | 90 | % VCC | IOH per rise/fall mode and VCC (see IOH/IOL table) | 1 | ||
| Output low voltage | VOL | 10 | % VCC | IOL per rise/fall mode and VCC (see IOH/IOL table) | 1 | ||
| Output load capacitance | L_CMOS | 15 | pF | 1 | |||
| Input high voltage (OE or ST) | VIH | 70 | % VCC | OE or ST pin | 1 | ||
| Input low voltage (OE or ST) | VIL | 30 | % VCC | OE or ST pin | 1 | ||
| Rise/fall time, default mode | tr/tf | 3 | ns | fO > 40 MHz; 20 % - 80 % VCC, L_CMOS = 15 pF | 1 | ||
| Rise/fall time, default mode | tr/tf | 6 | ns | fO ≤ 40 MHz; 20 % - 80 % VCC, L_CMOS = 15 pF | 1 | ||
| Disable time | t_stp | 1 | μs | Measured from the time OE or ST pin crosses 30 % VCC | 1 | ||
| Enable time | t_sta | 1 | μs | Measured from the time OE pin crosses 70 % VCC | 1 | ||
| Resume time | t_res | 3 | ms | Measured from the time ST pin crosses 70 % VCC | 1 | ||
| Start-up time | t_str | 3 | ms | Measured from the time VCC reaches its rated minimum value, 1.62 V | 1 | ||
| ESD breakdown voltage, Human Body Model | 2000 | V | Human Body Model (HBM) | 6 | |||
| ESD breakdown voltage, Machine Model | 250 | V | Machine Model (MM) | 6 | |||
| ESD breakdown voltage, Charged Device Model | 750 | V | Charged Device Model (CDM) | 6 |
CAD (KiCad official)
- Symbol:
SG-8018CE 8.192000MHz TJHSA - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sg-8018ce-8-192000mhz-tjhsa-etched.step/sg-8018ce-8-192000mhz-tjhsa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sg-8018ce-8-192000mhz-tjhsa.step/sg-8018ce-8-192000mhz-tjhsa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seiko Epson datasheet (8 pp, sha256
fc74da90fdbef766, retrieved 2026-10-14, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).