main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sg-8018ce-8-192000mhz-tjhsa: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sg-8018ce-8-192000mhz-tjhsa-etched.glb Publish 0.1.0 · Ray
sg-8018ce-8-192000mhz-tjhsa-etched.step sg-8018ce-8-192000mhz-tjhsa: factory component page (tier=lcsc) · Ray
sg-8018ce-8-192000mhz-tjhsa-hero.glb sg-8018ce-8-192000mhz-tjhsa: hero GLB from the etched model (keeps the MPN mark) · Ray
sg-8018ce-8-192000mhz-tjhsa-hero.overlay.json Publish 0.1.0 · Ray
sg-8018ce-8-192000mhz-tjhsa.glb Publish 0.1.0 · Ray
sg-8018ce-8-192000mhz-tjhsa.kicad_mod Publish 0.1.0 · Ray
sg-8018ce-8-192000mhz-tjhsa.kicad_sym Publish 0.1.0 · Ray
sg-8018ce-8-192000mhz-tjhsa.lbr Publish 0.1.0 · Ray
sg-8018ce-8-192000mhz-tjhsa.step Publish 0.1.0 · Ray

SG-8018CE 8.192000MHz TJHSA

Seiko Epson · Programmable Oscillators · SMD3225-4P

SG-8018CE 8.192000MHz TJHSA from Seiko Epson, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ST input Active-low standby input for this variant (the 'S' function code in the MPN): high gives the specified frequency on OUT, while low forces OUT low through a weak pull-down and puts the device in standby with supply current reduced to I_std (1.1 µA typ. at +25 °C, 2.5 µA max. at +105 °C).
2 GND power_in Power ground; a 0.1 µF capacitor between VCC and GND should be placed on the device side of the PCB as close to the device as possible with short wiring for optimum jitter performance.
3 OUT output CMOS clock output at the programmed frequency (0.67 MHz to 170 MHz), with a 15 pF maximum load and 10 % / 90 % VCC output levels.
4 VCC power_in Power supply input; the rated range is 1.62 V to 3.63 V, and this T-coded variant is specified for 1.8 V to 3.3 V typical.

Key specifications

Parameter Value
Manufacturer Seiko Epson
Package SMD3225-4P
Category Crystals, Oscillators, Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (rated range) VCC 1.62 3.63 V 1
Output frequency range fO 0.67 170 MHz 1
Operating temperature T_use -40 105 ºC 1
Storage temperature T_stg -40 125 ºC Storage as single product. 1
Frequency tolerance f_tol -50 50 ×10-6 T_use = -40 ºC ~ +105 ºC; includes initial tolerance, temperature, supply voltage, reflow, load drift and aging (+25 ºC, 10 years) 1
Current consumption, VCC 1.62 V ~ 1.98 V ICC 3.2 mA T_use = +105 ºC; No load, fO = 20 MHz 1
Current consumption, VCC 1.98 V ~ 2.20 V ICC 3.3 mA T_use = +105 ºC; No load, fO = 20 MHz 1
Current consumption, VCC 2.20 V ~ 2.80 V ICC 3.4 mA T_use = +105 ºC; No load, fO = 20 MHz 1
Current consumption, VCC 2.70 V ~ 3.63 V ICC 3.5 mA T_use = +105 ºC; No load, fO = 20 MHz 1
Current consumption at 170 MHz, VCC 1.62 V ~ 1.98 V ICC 5.5 mA T_use = +105 ºC; No load, fO = 170 MHz 1
Current consumption at 170 MHz, VCC 1.98 V ~ 2.20 V ICC 5.8 mA T_use = +105 ºC; No load, fO = 170 MHz 1
Current consumption at 170 MHz, VCC 2.20 V ~ 2.80 V ICC 6.7 mA T_use = +105 ºC; No load, fO = 170 MHz 1
Current consumption at 170 MHz, VCC 2.70 V ~ 3.63 V ICC 8.1 mA T_use = +105 ºC; No load, fO = 170 MHz 1
Output disable current, VCC 1.62 V ~ 1.98 V I_dis 3.2 mA OE = GND, fO = 170 MHz 1
Output disable current, VCC 1.98 V ~ 2.20 V I_dis 3.2 mA OE = GND, fO = 170 MHz 1
Output disable current, VCC 2.20 V ~ 2.80 V I_dis 3.3 mA OE = GND, fO = 170 MHz 1
Output disable current, VCC 2.70 V ~ 3.63 V I_dis 3.5 mA OE = GND, fO = 170 MHz 1
Standby current, VCC 1.62 V ~ 1.98 V I_std 0.9 μA T_use = +105 ºC; ST = GND 1
Standby current, VCC 1.98 V ~ 2.20 V I_std 1 μA T_use = +105 ºC; ST = GND 1
Standby current, VCC 2.20 V ~ 2.80 V I_std 1.5 μA T_use = +105 ºC; ST = GND 1
Standby current, VCC 2.70 V ~ 3.63 V I_std 2.5 μA T_use = +105 ºC; ST = GND 1
Symmetry SYM 45 55 % 50 % VCC level 1
Output high voltage VOH 90 % VCC IOH per rise/fall mode and VCC (see IOH/IOL table) 1
Output low voltage VOL 10 % VCC IOL per rise/fall mode and VCC (see IOH/IOL table) 1
Output load capacitance L_CMOS 15 pF 1
Input high voltage (OE or ST) VIH 70 % VCC OE or ST pin 1
Input low voltage (OE or ST) VIL 30 % VCC OE or ST pin 1
Rise/fall time, default mode tr/tf 3 ns fO > 40 MHz; 20 % - 80 % VCC, L_CMOS = 15 pF 1
Rise/fall time, default mode tr/tf 6 ns fO ≤ 40 MHz; 20 % - 80 % VCC, L_CMOS = 15 pF 1
Disable time t_stp 1 μs Measured from the time OE or ST pin crosses 30 % VCC 1
Enable time t_sta 1 μs Measured from the time OE pin crosses 70 % VCC 1
Resume time t_res 3 ms Measured from the time ST pin crosses 70 % VCC 1
Start-up time t_str 3 ms Measured from the time VCC reaches its rated minimum value, 1.62 V 1
ESD breakdown voltage, Human Body Model 2000 V Human Body Model (HBM) 6
ESD breakdown voltage, Machine Model 250 V Machine Model (MM) 6
ESD breakdown voltage, Charged Device Model 750 V Charged Device Model (CDM) 6

CAD (KiCad official)

  • Symbol: SG-8018CE 8.192000MHz TJHSA
  • Footprint: Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm
  • 3D model: SMD3225-4P (KiCad packages3D, STEP)
  • 3D model files: sg-8018ce-8-192000mhz-tjhsa-etched.step / sg-8018ce-8-192000mhz-tjhsa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sg-8018ce-8-192000mhz-tjhsa.step / sg-8018ce-8-192000mhz-tjhsa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Seiko Epson datasheet (8 pp, sha256 fc74da90fdbef766, retrieved 2026-10-14, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF