Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SL3232EESE

Slkor(SLKORMICRO Elec.) · RS232 ICs · SOP-16

SL3232EESE from Slkor(SLKORMICRO Elec.), in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive terminal for the first charge pump capacitor, used with a 0.1µF external capacitor in the typical application.
2 V+ power_out Doubled voltage terminal generated by the charge pump; limiting value is VCC-0.3 to +7 V, and V+ +
3 C1- passive Negative terminal for the first charge pump capacitor.
4 C2+ passive Positive terminal for the second charge pump capacitor.
5 C2- passive Negative terminal for the second charge pump capacitor.
6 V- power_out Inverted voltage terminal generated by the charge pump; limiting value is +0.3 to -7 V.
7 T2OUT output Second RS-232 transmitter output, limited to ±13.2 V, with a typical swing of ±4 to ±5 V into a 3 kΩ load to ground.
8 R2IN input Second RS-232 receiver input with a range of ±25 V and a typical input impedance of 3 to 7 kΩ.
9 R2OUT output Second receiver CMOS logic output, limited to -0.3 V to VCC+0.3 V.
10 T2IN input Second transmitter TTL/CMOS input with logic-low at 0.8 V max and logic-high at 2 V min, a -0.3 to +6 V range, and no internal pull-up; unused input may be tied to GND or VCC.
11 T1IN input First transmitter TTL/CMOS input with logic-low at 0.8 V max and logic-high at 2 V min, a -0.3 to +6 V range, and no internal pull-up; unused input may be tied to GND or VCC.
12 R1OUT output First receiver CMOS logic output, limited to -0.3 V to VCC+0.3 V.
13 R1IN input First RS-232 receiver input with a range of ±25 V and a typical input impedance of 3 to 7 kΩ.
14 T1OUT output First RS-232 transmitter output, limited to ±13.2 V, with a typical swing of ±4 to ±5 V into a 3 kΩ load to ground.
15 GND power_in Ground reference for all voltages on the device.
16 VCC power_in Supply voltage of 3.0 V to 5.5 V; absolute maximum range is -0.3 to +6 V.

Key specifications

Parameter Value
Manufacturer Slkor(SLKORMICRO Elec.)
Package SOP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (recommended) VCC 3 5.5 V 1
Supply voltage VCC -0.3 6 V 2
Doubled voltage terminal V+ 7 V 2
Inverted voltage terminal V- -7 0.3 V 2
V+ + /V-/ V+ + /V-/ 13 V 2
Transmitter input voltage range T1IN, T2IN -0.3 6 V 2
Receiver input voltage range R1IN, R2IN -25 25 V 2
Transmitter output voltage range T1OUT, T2OUT -13.2 13.2 V 2
Receiver output voltage range R1OUT, R2OUT -0.3 V 2
Operating temperature TA -40 85 ℃ 3
Storage temperature Tstg -60 150 ℃ 3
Continuous power 760 mW SOP16 package 3
Soldering temperature 300 ℃ 3
Logic control low level VTTIN_L 0.8 V T1IN, T2IN 4
Logic control high level VTTIN_H 2 V T1IN, T2IN 4
Input logic current ITIN -1 1 μA T1IN, T2IN 4
Receiver output logic-low voltage VROL 0.4 V IOUT=1.6mA, VCC=5V or 3.3V 4
Receiver input range VRIN -25 25 V 4
Receiver input low threshold VRIL 0.6 1.1 V VCC=3.3V 4
Receiver input low threshold VRIL 0.8 1.5 V VCC=5V 4
Receiver input high threshold VRIH 1.5 2.4 V VCC=3.3V 5
Receiver input high threshold VRIH 1.9 2.4 V VCC=5V 5
Receiver input impedance RRIN 3 5 7 kΩ 5
Transmitter output swing VTOUT -4 5 V All output ports of transmitter connect 3kΩ load to ground 5
ESD protection HBM -15 15 kV R1IN、R2IN、T1OUT、T2OUT 5
ESD protection air discharge -15 15 kV R1IN、R2IN、T1OUT、T2OUT 5
ESD protection contact discharge -8 8 kV R1IN、R2IN、T1OUT、T2OUT 5
Transmitter slew rate SR 4 30 V/μs RL=3kΩ7kΩ, CL=150pF1000pF, from -3.0V3.0V or from 3.0V-3.0V 6
Supply current with no load Isup 2 mA 4
Logic control hysteresis 0.3 V T1IN, T2IN 4
Receiver input hysteresis 0.4 V 5
Transmitter output impedance RTOUT 300 Ω VCC=0V, Transmitter Input=±2V 5
Transmitter short-circuit current Itsc 60 mA 5
Rate speed 96 kbps RL=3kΩ, CL=1000pF 5
Receiver propagation delay tRPHL tRPHL 300 ns CL=150pF 6
Receiver propagation delay tRPLH tRPLH 300 ns CL=150pF 6
Receiver propagation delay difference /tRPHL- tRPLH/ 150 ns 6
Transmitter propagation delay difference /tTPHL- tTPLH/ 150 ns 6

CAD (KiCad official)

  • Symbol: SL3232EESE
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: sl3232eese-etched.step / sl3232eese-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sl3232eese.step / sl3232eese.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Slkor(SLKORMICRO Elec.) datasheet (12 pp, sha256 ce5be35ca0d91b32, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF