Generated by kicad-footprint-generator · KiCad file format 20260206
SL3232EESE
Slkor(SLKORMICRO Elec.) · RS232 ICs · SOP-16
SL3232EESE from Slkor(SLKORMICRO Elec.), in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal for the first charge pump capacitor, used with a 0.1µF external capacitor in the typical application. |
| 2 | V+ | power_out | Doubled voltage terminal generated by the charge pump; limiting value is VCC-0.3 to +7 V, and V+ + |
| 3 | C1- | passive | Negative terminal for the first charge pump capacitor. |
| 4 | C2+ | passive | Positive terminal for the second charge pump capacitor. |
| 5 | C2- | passive | Negative terminal for the second charge pump capacitor. |
| 6 | V- | power_out | Inverted voltage terminal generated by the charge pump; limiting value is +0.3 to -7 V. |
| 7 | T2OUT | output | Second RS-232 transmitter output, limited to ±13.2 V, with a typical swing of ±4 to ±5 V into a 3 kΩ load to ground. |
| 8 | R2IN | input | Second RS-232 receiver input with a range of ±25 V and a typical input impedance of 3 to 7 kΩ. |
| 9 | R2OUT | output | Second receiver CMOS logic output, limited to -0.3 V to VCC+0.3 V. |
| 10 | T2IN | input | Second transmitter TTL/CMOS input with logic-low at 0.8 V max and logic-high at 2 V min, a -0.3 to +6 V range, and no internal pull-up; unused input may be tied to GND or VCC. |
| 11 | T1IN | input | First transmitter TTL/CMOS input with logic-low at 0.8 V max and logic-high at 2 V min, a -0.3 to +6 V range, and no internal pull-up; unused input may be tied to GND or VCC. |
| 12 | R1OUT | output | First receiver CMOS logic output, limited to -0.3 V to VCC+0.3 V. |
| 13 | R1IN | input | First RS-232 receiver input with a range of ±25 V and a typical input impedance of 3 to 7 kΩ. |
| 14 | T1OUT | output | First RS-232 transmitter output, limited to ±13.2 V, with a typical swing of ±4 to ±5 V into a 3 kΩ load to ground. |
| 15 | GND | power_in | Ground reference for all voltages on the device. |
| 16 | VCC | power_in | Supply voltage of 3.0 V to 5.5 V; absolute maximum range is -0.3 to +6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor(SLKORMICRO Elec.) |
| Package | SOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (recommended) | VCC | 3 | 5.5 | V | 1 | ||
| Supply voltage | VCC | -0.3 | 6 | V | 2 | ||
| Doubled voltage terminal | V+ | 7 | V | 2 | |||
| Inverted voltage terminal | V- | -7 | 0.3 | V | 2 | ||
| V+ + /V-/ | V+ + /V-/ | 13 | V | 2 | |||
| Transmitter input voltage range | T1IN, T2IN | -0.3 | 6 | V | 2 | ||
| Receiver input voltage range | R1IN, R2IN | -25 | 25 | V | 2 | ||
| Transmitter output voltage range | T1OUT, T2OUT | -13.2 | 13.2 | V | 2 | ||
| Receiver output voltage range | R1OUT, R2OUT | -0.3 | V | 2 | |||
| Operating temperature | TA | -40 | 85 | ℃ | 3 | ||
| Storage temperature | Tstg | -60 | 150 | ℃ | 3 | ||
| Continuous power | 760 | mW | SOP16 package | 3 | |||
| Soldering temperature | 300 | ℃ | 3 | ||||
| Logic control low level | VTTIN_L | 0.8 | V | T1IN, T2IN | 4 | ||
| Logic control high level | VTTIN_H | 2 | V | T1IN, T2IN | 4 | ||
| Input logic current | ITIN | -1 | 1 | μA | T1IN, T2IN | 4 | |
| Receiver output logic-low voltage | VROL | 0.4 | V | IOUT=1.6mA, VCC=5V or 3.3V | 4 | ||
| Receiver input range | VRIN | -25 | 25 | V | 4 | ||
| Receiver input low threshold | VRIL | 0.6 | 1.1 | V | VCC=3.3V | 4 | |
| Receiver input low threshold | VRIL | 0.8 | 1.5 | V | VCC=5V | 4 | |
| Receiver input high threshold | VRIH | 1.5 | 2.4 | V | VCC=3.3V | 5 | |
| Receiver input high threshold | VRIH | 1.9 | 2.4 | V | VCC=5V | 5 | |
| Receiver input impedance | RRIN | 3 | 5 | 7 | kΩ | 5 | |
| Transmitter output swing | VTOUT | -4 | 5 | V | All output ports of transmitter connect 3kΩ load to ground | 5 | |
| ESD protection HBM | -15 | 15 | kV | R1IN、R2IN、T1OUT、T2OUT | 5 | ||
| ESD protection air discharge | -15 | 15 | kV | R1IN、R2IN、T1OUT、T2OUT | 5 | ||
| ESD protection contact discharge | -8 | 8 | kV | R1IN、R2IN、T1OUT、T2OUT | 5 | ||
| Transmitter slew rate | SR | 4 | 30 | V/μs | RL=3kΩ |
6 | |
| Supply current with no load | Isup | 2 | mA | 4 | |||
| Logic control hysteresis | 0.3 | V | T1IN, T2IN | 4 | |||
| Receiver input hysteresis | 0.4 | V | 5 | ||||
| Transmitter output impedance | RTOUT | 300 | Ω | VCC=0V, Transmitter Input=±2V | 5 | ||
| Transmitter short-circuit current | Itsc | 60 | mA | 5 | |||
| Rate speed | 96 | kbps | RL=3kΩ, CL=1000pF | 5 | |||
| Receiver propagation delay tRPHL | tRPHL | 300 | ns | CL=150pF | 6 | ||
| Receiver propagation delay tRPLH | tRPLH | 300 | ns | CL=150pF | 6 | ||
| Receiver propagation delay difference | /tRPHL- tRPLH/ | 150 | ns | 6 | |||
| Transmitter propagation delay difference | /tTPHL- tTPLH/ | 150 | ns | 6 |
CAD (KiCad official)
- Symbol:
SL3232EESE - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
sl3232eese-etched.step/sl3232eese-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl3232eese.step/sl3232eese.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor(SLKORMICRO Elec.) datasheet (12 pp, sha256
ce5be35ca0d91b32, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).