3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM5022QDGSRQ1
Texas Instruments · DC-DC Converters · VSSOP-10-0.5mm
LM5022QDGSRQ1 from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Source input voltage for the start-up regulator operating from 6 V to 60 V. |
| 2 | FB | input | Inverting input to the internal voltage error amplifier with non-inverting input connecting to 1.25-V reference. |
| 3 | COMP | output | Error amplifier output and PWM comparator input; control loop compensation components connect between this pin and FB pin. |
| 4 | VCC | power_out | Output of the internal high-voltage linear regulator; bypass to GND pin with ceramic capacitor. |
| 5 | OUT | output | Output of MOSFET gate driver with 1-A peak current capability; connect to external MOSFET gate. |
| 6 | GND | power_in | System ground. |
| 7 | UVLO | input | Undervoltage lockout input; set start-up and shutdown levels via resistor divider with 20-µA hysteresis current source. |
| 8 | CS | input | Current sense input for switch current used in current mode control and current limiting. |
| 9 | RT/SYNC | input | Oscillator frequency adjust pin and external synchronization input; external resistor to GND sets frequency or AC-coupled clock input for synchronization. |
| 10 | SS | input | Soft-start pin; external capacitor to ground charged by 10-µA current source creates ramp voltage for regulator start-up. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Power Management (PMIC) |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to GND | VIN | -0.3 | 65 | V | 4 | ||
| VCC to GND | VCC | -0.3 | 16 | V | 4 | ||
| RT/SYNC to GND | RT/SYNC | -0.3 | 5.5 | V | 4 | ||
| OUT to GND | OUT | -1.5 | V | for < 100 ns | 4 | ||
| All other pins to GND | -0.3 | 7 | V | 4 | |||
| Junction temperature | 150 | °C | 4 | ||||
| Soldering information, vapor phase | 215 | °C | Vapor phase (60 sec.) | 4 | |||
| Soldering information, infrared | 220 | °C | Infrared (15 sec.) | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | 6 | 60 | V | 4 | |||
| External voltage at VCC | 7.5 | 14 | V | 4 | |||
| Junction temperature | -40 | 125 | °C | 4 | |||
| FB pin voltage | VFB | 1.225 | 1.25 | 1.275 | V | 5 | |
| VCC regulation | VCC | 6.6 | 7 | 7.4 | V | 10 V ≤ VIN ≤ 60 V, ICC = 1 mA | 5 |
| ICC supply current | ICC | 3.5 | 4 | mA | OUT Pin Capacitance = 0, VCC = 10 V | 5 | |
| VCC current limit | ICC-LIM | 15 | 35 | mA | VCC = 0 V | 5 | |
| Start-up regulator leakage | IVIN | 150 | 500 | µA | VIN = 60 V | 5 | |
| Shutdown current | IIN-SD | 350 | 450 | µA | VUVLO = 0 V, VCC = Open Circuit | 5 | |
| COMP pin current sink capability | ICOMP | 5 | 17 | mA | VFB = 1.5 V, VCOMP = 1 V | 5 | |
| UVLO shutdown threshold | VSD | 1.22 | 1.25 | 1.28 | V | 5 | |
| Shutdown hysteresis current source | ISD-HYS | 16 | 20 | 24 | µA | 5 | |
| Current limit threshold voltage | VCS | 0.434 | 0.5 | 0.55 | V | 5 | |
| CS pin sink impedance | RCS | 40 | 75 | Ω | Blanking active | 5 | |
| Soft-start current source | ISS | 7 | 10 | 13 | µA | 5 | |
| Soft-start to COMP offset | VSS-OFF | 0.344 | 0.55 | 0.75 | V | 5 | |
| Oscillator frequency | fSW | 170 | 200 | 230 | kHz | RT to GND = 84.5 kΩ | 6 |
| Oscillator frequency | fSW | 525 | 600 | 675 | kHz | RT to GND = 27.4 kΩ | 6 |
| Oscillator frequency | fSW | 865 | 990 | 1115 | kHz | RT to GND = 16.2 kΩ | 6 |
| Oscillator frequency | fSW | 1910 | 2240 | 2570 | kHz | RT to GND = 6.65 kΩ | 6 |
| Minimum duty cycle | DMIN | 0 | % | VCOMP = 0 V | 6 | ||
| Maximum duty cycle | DMAX | 90 | 95 | % | 6 | ||
| COMP pin open circuit voltage | VCOMP-OC | 4.3 | 5.2 | 6.1 | V | VFB = 0 V | 6 |
| COMP pin short circuit current | ICOMP-SC | 0.6 | 1.1 | 1.5 | mA | VCOMP = 0 V, VFB = 0V | 6 |
| Slope compensation amplitude | VSLOPE | 83 | 110 | 137 | mV | 6 | |
| Output high saturation voltage (VCC – VOUT) | VSAT-HI | 0.25 | 0.75 | V | IOUT = 50 mA | 6 | |
| Output low saturation voltage (VOUT) | VSAT-LO | 0.25 | 0.75 | V | IOUT = 100 mA | 6 | |
| Junction-to-ambient thermal resistance | RθJA | 161.5 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 56 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 81.3 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 5.7 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 80 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
LM5022QDGSRQ1 - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
lm5022qdgsrq1-etched.step/lm5022qdgsrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5022qdgsrq1.step/lm5022qdgsrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
cc533fcb10693cd9, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).