main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm5022qdgsrq1: viewers · Ray
lm5022qdgsrq1-etched.fit.json lm5022qdgsrq1: one-pass backfill (re-etched) · Ray
lm5022qdgsrq1-etched.glb lm5022qdgsrq1: one-pass backfill (re-etched) · Ray
lm5022qdgsrq1-etched.step lm5022qdgsrq1: one-pass backfill (re-etched) · Ray
lm5022qdgsrq1-hero.glb lm5022qdgsrq1: one-pass backfill (re-etched) · Ray
lm5022qdgsrq1-hero.overlay.json lm5022qdgsrq1: one-pass backfill (re-etched) · Ray
lm5022qdgsrq1.glb Publish 0.1.0 · Ray
lm5022qdgsrq1.kicad_mod Publish 0.1.0 · Ray
lm5022qdgsrq1.kicad_sym Publish 0.1.0 · Ray
lm5022qdgsrq1.lbr Publish 0.1.0 · Ray
lm5022qdgsrq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md lm5022qdgsrq1: specified limits as data (metadata.characteristics, 41 rows from the datasheet) · Ray

LM5022QDGSRQ1

Texas Instruments · DC-DC Converters · VSSOP-10-0.5mm

LM5022QDGSRQ1 from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Source input voltage for the start-up regulator operating from 6 V to 60 V.
2 FB input Inverting input to the internal voltage error amplifier with non-inverting input connecting to 1.25-V reference.
3 COMP output Error amplifier output and PWM comparator input; control loop compensation components connect between this pin and FB pin.
4 VCC power_out Output of the internal high-voltage linear regulator; bypass to GND pin with ceramic capacitor.
5 OUT output Output of MOSFET gate driver with 1-A peak current capability; connect to external MOSFET gate.
6 GND power_in System ground.
7 UVLO input Undervoltage lockout input; set start-up and shutdown levels via resistor divider with 20-µA hysteresis current source.
8 CS input Current sense input for switch current used in current mode control and current limiting.
9 RT/SYNC input Oscillator frequency adjust pin and external synchronization input; external resistor to GND sets frequency or AC-coupled clock input for synchronization.
10 SS input Soft-start pin; external capacitor to ground charged by 10-µA current source creates ramp voltage for regulator start-up.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-10-0.5mm
Category Power Management (PMIC)
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN to GND VIN -0.3 65 V 4
VCC to GND VCC -0.3 16 V 4
RT/SYNC to GND RT/SYNC -0.3 5.5 V 4
OUT to GND OUT -1.5 V for < 100 ns 4
All other pins to GND -0.3 7 V 4
Junction temperature 150 °C 4
Soldering information, vapor phase 215 °C Vapor phase (60 sec.) 4
Soldering information, infrared 220 °C Infrared (15 sec.) 4
Storage temperature Tstg -65 150 °C 4
Supply voltage 6 60 V 4
External voltage at VCC 7.5 14 V 4
Junction temperature -40 125 °C 4
FB pin voltage VFB 1.225 1.25 1.275 V 5
VCC regulation VCC 6.6 7 7.4 V 10 V ≤ VIN ≤ 60 V, ICC = 1 mA 5
ICC supply current ICC 3.5 4 mA OUT Pin Capacitance = 0, VCC = 10 V 5
VCC current limit ICC-LIM 15 35 mA VCC = 0 V 5
Start-up regulator leakage IVIN 150 500 µA VIN = 60 V 5
Shutdown current IIN-SD 350 450 µA VUVLO = 0 V, VCC = Open Circuit 5
COMP pin current sink capability ICOMP 5 17 mA VFB = 1.5 V, VCOMP = 1 V 5
UVLO shutdown threshold VSD 1.22 1.25 1.28 V 5
Shutdown hysteresis current source ISD-HYS 16 20 24 µA 5
Current limit threshold voltage VCS 0.434 0.5 0.55 V 5
CS pin sink impedance RCS 40 75 Ω Blanking active 5
Soft-start current source ISS 7 10 13 µA 5
Soft-start to COMP offset VSS-OFF 0.344 0.55 0.75 V 5
Oscillator frequency fSW 170 200 230 kHz RT to GND = 84.5 kΩ 6
Oscillator frequency fSW 525 600 675 kHz RT to GND = 27.4 kΩ 6
Oscillator frequency fSW 865 990 1115 kHz RT to GND = 16.2 kΩ 6
Oscillator frequency fSW 1910 2240 2570 kHz RT to GND = 6.65 kΩ 6
Minimum duty cycle DMIN 0 % VCOMP = 0 V 6
Maximum duty cycle DMAX 90 95 % 6
COMP pin open circuit voltage VCOMP-OC 4.3 5.2 6.1 V VFB = 0 V 6
COMP pin short circuit current ICOMP-SC 0.6 1.1 1.5 mA VCOMP = 0 V, VFB = 0V 6
Slope compensation amplitude VSLOPE 83 110 137 mV 6
Output high saturation voltage (VCC – VOUT) VSAT-HI 0.25 0.75 V IOUT = 50 mA 6
Output low saturation voltage (VOUT) VSAT-LO 0.25 0.75 V IOUT = 100 mA 6
Junction-to-ambient thermal resistance RθJA 161.5 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 56 °C/W 4
Junction-to-board thermal resistance RθJB 81.3 °C/W 4
Junction-to-top characterization parameter ψJT 5.7 °C/W 4
Junction-to-board characterization parameter ψJB 80 °C/W 4

CAD (KiCad official)

  • Symbol: LM5022QDGSRQ1
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
  • 3D model files: lm5022qdgsrq1-etched.step / lm5022qdgsrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5022qdgsrq1.step / lm5022qdgsrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 cc533fcb10693cd9, retrieved 2026-10-03, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF