3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLP2981A-33DBVT
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5
LP2981A-33DBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input accepting 2.2 V to 16 V (recommended), with a minimum 1 µF input capacitor placed within 1 cm of the pin. |
| 2 | GND | power_in | Ground. |
| 3 | ON/OFF | input | Active-low shutdown pin that is tied to VIN if unused, with input range 0 V to VIN (absolute max 16 V). |
| 4 | NC | unconnected | No connect. |
| 5 | VOUT | power_out | Regulated voltage output (3.3 V for this variant) delivering up to 100 mA, requiring at least 3.3 µF output capacitor with ESR within the specified range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance | ΔVOUT | -0.75 | 0.75 | %VNOM | IL = 1 mA, TA = 25°C | 5 | |
| Output voltage tolerance | ΔVOUT | -1 | 1 | %VNOM | IL = 1 mA to 100 mA, TA = 25°C | 5 | |
| Output voltage tolerance | ΔVOUT | -2.5 | 2.5 | %VNOM | IL = 1 mA to 100 mA, TA = -40°C to 125°C | 5 | |
| Line regulation | ΔVOUT/ΔVIN | 0.007 | 0.014 | %/V | VIN = (VOUT(NOM)+1 V) to 16 V, TA = 25°C | 5 | |
| Line regulation | ΔVOUT/ΔVIN | 0.032 | %/V | VIN = (VOUT(NOM)+1 V) to 16 V, TA = -40°C to 125°C | 5 | ||
| Dropout voltage | VIN, VOUT | 1 | 3 | mV | IL = 0, TA = 25°C | 5 | |
| Dropout voltage | VIN, VOUT | 5 | mV | IL = 0, TA = -40°C to 125°C | 5 | ||
| Dropout voltage | VIN, VOUT | 7 | 10 | mV | IL = 1 mA, TA = 25°C | 5 | |
| Dropout voltage | VIN, VOUT | 15 | mV | IL = 1 mA, TA = -40°C to 125°C | 5 | ||
| Dropout voltage | VIN, VOUT | 70 | 100 | mV | IL = 25 mA, TA = 25°C | 5 | |
| Dropout voltage | VIN, VOUT | 150 | mV | IL = 25 mA, TA = -40°C to 125°C | 5 | ||
| Dropout voltage | VIN, VOUT | 200 | 250 | mV | IL = 100 mA, TA = 25°C | 5 | |
| Dropout voltage | VIN, VOUT | 375 | mV | IL = 100 mA, TA = -40°C to 125°C | 5 | ||
| Ground pin current | IGND | 65 | 95 | µA | IL = 0, TA = 25°C | 6 | |
| Ground pin current | IGND | 125 | µA | IL = 0, TA = -40°C to 125°C | 6 | ||
| Ground pin current | IGND | 80 | 110 | µA | IL = 1 mA, TA = 25°C | 6 | |
| Ground pin current | IGND | 170 | µA | IL = 1 mA, TA = -40°C to 125°C | 6 | ||
| Ground pin current | IGND | 200 | 300 | µA | IL = 25 mA, TA = 25°C | 6 | |
| Ground pin current | IGND | 550 | µA | IL = 25 mA, TA = -40°C to 125°C | 6 | ||
| Ground pin current | IGND | 600 | 1000 | µA | IL = 100 mA, TA = 25°C | 6 | |
| Ground pin current | IGND | 1700 | µA | IL = 100 mA, TA = -40°C to 125°C | 6 | ||
| Ground pin current (shutdown) | IGND | 0.01 | 0.8 | µA | VON/OFF < 0.3 V (OFF), TA = 25°C | 6 | |
| Ground pin current (shutdown) | IGND | 0.05 | 2 | µA | VON/OFF < 0.15 V (OFF), TA = -40°C to 105°C | 6 | |
| Ground pin current (shutdown) | IGND | 5 | µA | VON/OFF < 0.15 V (OFF), TA = -40°C to 125°C | 6 | ||
| ON/OFF input voltage high (O/P ON) | VON/OFF | 1.6 | 1.4 | V | High = O/P ON; typ at TA = 25°C, min 1.6 at -40°C to 125°C | 6 | |
| ON/OFF input voltage low (O/P OFF) | VON/OFF | 0.5 | 0.15 | V | Low = O/P OFF; typ at TA = 25°C, max 0.15 at -40°C to 125°C | 6 | |
| ON/OFF input current | ION/OFF | -1 | 0.01 | µA | VON/OFF = 0; typ at TA = 25°C, min -1 at -40°C to 125°C | 6 | |
| ON/OFF input current | ION/OFF | 5 | 15 | µA | VON/OFF = 5 V; typ at TA = 25°C, max 15 at -40°C to 125°C | 6 | |
| Peak output current | IOUT(PK) | 150 | 400 | mA | VOUT ≥ VOUT(NOM), 5%, TA = 25°C | 6 | |
| Output noise voltage (RMS) | Vn | 160 | µV | BW = 300 Hz to 50 kHz, COUT = 10 µF, TA = 25°C | 6 | ||
| Ripple rejection | ΔVOUT/ΔVIN | 63 | dB | f = 1 kHz, COUT = 10 µF, TA = 25°C | 6 | ||
| Short-circuit current | IOUT(MAX) | 150 | mA | RL = 0 (steady state), TA = 25°C | 6 | ||
| Continuous input voltage | VIN | -0.3 | 16 | V | 3 | ||
| ON/OFF input voltage | VON/OFF | -0.3 | 16 | V | 3 | ||
| Output voltage | VOUT | -0.3 | 9 | V | 3 | ||
| Operating virtual junction temperature | TJ | 150 | °C | 3 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 3 | |
| ESD CDM | V(ESD) | -1000 | 1000 | V | Charged-device model, JESD22-C101 | 3 | |
| ESD MM | V(ESD) | -200 | 200 | V | Machine model | 3 | |
| Supply input voltage | VIN | 2.2 | 16 | V | 4 | ||
| ON/OFF input voltage | VON/OFF | 0 | V | max is VIN | 4 | ||
| Input-output differential | VIN, VOUT | 0.7 | 11 | V | 4 | ||
| Output current | IOUT | 100 | mA | 4 | |||
| Virtual junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 205.2 | °C/W | DBV (SOT-23), 5 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 11.83 | °C/W | DBV (SOT-23), 5 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 37.7 | °C/W | DBV (SOT-23), 5 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 12.2 | °C/W | DBV (SOT-23), 5 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 33.8 | °C/W | DBV (SOT-23), 5 pins | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | capacitors, and to the LDO ground pin as close to each other as possible, connected by a wide, component-side, copper surface. The use of vias and long traces to create LDO circuit connections is stro | 12 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LP2981A-33DBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lp2981a-33dbvt-etched.step/lp2981a-33dbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp2981a-33dbvt.step/lp2981a-33dbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
ad245dedca86e10b, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).