Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LP2981A-33DBVT

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

LP2981A-33DBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Supply input accepting 2.2 V to 16 V (recommended), with a minimum 1 µF input capacitor placed within 1 cm of the pin.
2 GND power_in Ground.
3 ON/OFF input Active-low shutdown pin that is tied to VIN if unused, with input range 0 V to VIN (absolute max 16 V).
4 NC unconnected No connect.
5 VOUT power_out Regulated voltage output (3.3 V for this variant) delivering up to 100 mA, requiring at least 3.3 µF output capacitor with ESR within the specified range.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage tolerance ΔVOUT -0.75 0.75 %VNOM IL = 1 mA, TA = 25°C 5
Output voltage tolerance ΔVOUT -1 1 %VNOM IL = 1 mA to 100 mA, TA = 25°C 5
Output voltage tolerance ΔVOUT -2.5 2.5 %VNOM IL = 1 mA to 100 mA, TA = -40°C to 125°C 5
Line regulation ΔVOUT/ΔVIN 0.007 0.014 %/V VIN = (VOUT(NOM)+1 V) to 16 V, TA = 25°C 5
Line regulation ΔVOUT/ΔVIN 0.032 %/V VIN = (VOUT(NOM)+1 V) to 16 V, TA = -40°C to 125°C 5
Dropout voltage VIN, VOUT 1 3 mV IL = 0, TA = 25°C 5
Dropout voltage VIN, VOUT 5 mV IL = 0, TA = -40°C to 125°C 5
Dropout voltage VIN, VOUT 7 10 mV IL = 1 mA, TA = 25°C 5
Dropout voltage VIN, VOUT 15 mV IL = 1 mA, TA = -40°C to 125°C 5
Dropout voltage VIN, VOUT 70 100 mV IL = 25 mA, TA = 25°C 5
Dropout voltage VIN, VOUT 150 mV IL = 25 mA, TA = -40°C to 125°C 5
Dropout voltage VIN, VOUT 200 250 mV IL = 100 mA, TA = 25°C 5
Dropout voltage VIN, VOUT 375 mV IL = 100 mA, TA = -40°C to 125°C 5
Ground pin current IGND 65 95 µA IL = 0, TA = 25°C 6
Ground pin current IGND 125 µA IL = 0, TA = -40°C to 125°C 6
Ground pin current IGND 80 110 µA IL = 1 mA, TA = 25°C 6
Ground pin current IGND 170 µA IL = 1 mA, TA = -40°C to 125°C 6
Ground pin current IGND 200 300 µA IL = 25 mA, TA = 25°C 6
Ground pin current IGND 550 µA IL = 25 mA, TA = -40°C to 125°C 6
Ground pin current IGND 600 1000 µA IL = 100 mA, TA = 25°C 6
Ground pin current IGND 1700 µA IL = 100 mA, TA = -40°C to 125°C 6
Ground pin current (shutdown) IGND 0.01 0.8 µA VON/OFF < 0.3 V (OFF), TA = 25°C 6
Ground pin current (shutdown) IGND 0.05 2 µA VON/OFF < 0.15 V (OFF), TA = -40°C to 105°C 6
Ground pin current (shutdown) IGND 5 µA VON/OFF < 0.15 V (OFF), TA = -40°C to 125°C 6
ON/OFF input voltage high (O/P ON) VON/OFF 1.6 1.4 V High = O/P ON; typ at TA = 25°C, min 1.6 at -40°C to 125°C 6
ON/OFF input voltage low (O/P OFF) VON/OFF 0.5 0.15 V Low = O/P OFF; typ at TA = 25°C, max 0.15 at -40°C to 125°C 6
ON/OFF input current ION/OFF -1 0.01 µA VON/OFF = 0; typ at TA = 25°C, min -1 at -40°C to 125°C 6
ON/OFF input current ION/OFF 5 15 µA VON/OFF = 5 V; typ at TA = 25°C, max 15 at -40°C to 125°C 6
Peak output current IOUT(PK) 150 400 mA VOUT ≥ VOUT(NOM), 5%, TA = 25°C 6
Output noise voltage (RMS) Vn 160 µV BW = 300 Hz to 50 kHz, COUT = 10 µF, TA = 25°C 6
Ripple rejection ΔVOUT/ΔVIN 63 dB f = 1 kHz, COUT = 10 µF, TA = 25°C 6
Short-circuit current IOUT(MAX) 150 mA RL = 0 (steady state), TA = 25°C 6
Continuous input voltage VIN -0.3 16 V 3
ON/OFF input voltage VON/OFF -0.3 16 V 3
Output voltage VOUT -0.3 9 V 3
Operating virtual junction temperature TJ 150 °C 3
Storage temperature Tstg -65 150 °C 3
ESD HBM V(ESD) -2000 2000 V Human-body model, ANSI/ESDA/JEDEC JS-001 3
ESD CDM V(ESD) -1000 1000 V Charged-device model, JESD22-C101 3
ESD MM V(ESD) -200 200 V Machine model 3
Supply input voltage VIN 2.2 16 V 4
ON/OFF input voltage VON/OFF 0 V max is VIN 4
Input-output differential VIN, VOUT 0.7 11 V 4
Output current IOUT 100 mA 4
Virtual junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 205.2 °C/W DBV (SOT-23), 5 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 11.83 °C/W DBV (SOT-23), 5 pins 4
Junction-to-board thermal resistance RθJB 37.7 °C/W DBV (SOT-23), 5 pins 4
Junction-to-top characterization parameter ψJT 12.2 °C/W DBV (SOT-23), 5 pins 4
Junction-to-board characterization parameter ψJB 33.8 °C/W DBV (SOT-23), 5 pins 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper capacitors, and to the LDO ground pin as close to each other as possible, connected by a wide, component-side, copper surface. The use of vias and long traces to create LDO circuit connections is stro 12

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LP2981A-33DBVT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lp2981a-33dbvt-etched.step / lp2981a-33dbvt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp2981a-33dbvt.step / lp2981a-33dbvt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 ad245dedca86e10b, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF