Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2594HVM-3.3

Texas Instruments · DC-DC Converters · SOIC-8

LM2594HVM-3.3 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection; the datasheet's figure footnote says NC pins have no internal connection but must be soldered to the PCB for best heat transfer.
2 NC unconnected No connection; the datasheet's figure footnote says NC pins have no internal connection but must be soldered to the PCB for best heat transfer.
3 NC unconnected No connection; the datasheet's figure footnote says NC pins have no internal connection but must be soldered to the PCB for best heat transfer.
4 Feedback input Senses the regulated output voltage to complete the feedback loop; the feedback pin voltage is limited to −0.3 V to 25 V.
5 ON/OFF input Shuts the regulator down with logic levels: pulling below about 1.3 V turns it on and pulling above 1.3 V (maximum 25 V) shuts it down, dropping total input supply current to about 80 µA.
6 Ground power_in Circuit ground.
7 +VIN power_in Positive input supply for the switching regulator (4.5 V to 60 V for the LM2594HV); a suitable input bypass capacitor must be present at this pin.
8 Output output Internal switch output that swings between (+VIN − VSAT) and approximately −0.5 V at a duty cycle of VOUT/VIN; keep the PCB copper area on this pin to a minimum to limit coupling to sensitive circuitry.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (LM2594HV) 60 V 4
ON/OFF pin input voltage -0.3 25 V 4
Feedback pin voltage -0.3 25 V 4
Output voltage to ground (steady state) -1 V 4
Lead temperature, vapor phase (60 s), D8 package 215 °C Vapor phase (60 s) 4
Lead temperature, infrared (15 s), D8 package 220 °C Infrared (15 s) 4
Maximum junction temperature 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage (LM2594HV) 4.5 60 V 4
Operating temperature -40 125 °C 4
Junction-to-ambient thermal resistance, D (SOIC) package RθJA 150 °C/W JESD 51-7, 4-layer JEDEC board 4
Output voltage, 3.3 V version VOUT 3.168 3.3 3.432 V 4.75 V ≤ VIN ≤ VINmax, 0.1 A ≤ ILOAD ≤ 0.5 A, TJ = 25°C 5
Output voltage, 3.3 V version, over full operating temperature range VOUT 3.135 3.465 V 4.75 V ≤ VIN ≤ VINmax, 0.1 A ≤ ILOAD ≤ 0.5 A, over full operating temperature range 5
Oscillator frequency fO 127 150 173 kHz TJ = 25°C 6
Oscillator frequency, over full operating temperature range fO 110 173 kHz Over full operating temperature range 6
Saturation voltage VSAT 0.9 1.1 V IOUT = 0.5 A, TJ = 25°C 6
Saturation voltage, over full operating temperature range VSAT 1.2 V IOUT = 0.5 A, over full operating temperature range 6
Max duty cycle (ON) DC 100 % 6
Min duty cycle (OFF) 0 % 6
Current limit, peak current ICL 0.65 0.8 1.3 A Peak current, TJ = 25°C 6
Current limit, peak current, over full operating temperature range ICL 0.58 1.4 A Peak current, over full operating temperature range 6
Output leakage current, output = 0 V IL 50 μA Output = 0 V 6
Output leakage current, output = -1 V IL 2 15 mA Output = -1 V 6
Quiescent current IQ 5 10 mA Feedback pin connected to 12 V (switch forced OFF) 6
Standby quiescent current (LM2594HV) ISTBY 140 250 μA ON/OFF pin = 5 V (OFF), TJ = 25°C 6
Standby quiescent current (LM2594HV), over full operating temperature range ISTBY 300 μA ON/OFF pin = 5 V (OFF), over full operating temperature range 6
ON/OFF pin logic input threshold voltage VIH 1.3 V 6
ON/OFF pin threshold, low (regulator ON), over full operating temperature range 0.6 V Low (regulator ON), over full operating temperature range 6
ON/OFF pin threshold, high (regulator OFF), over full operating temperature range VIL 2 V High (regulator OFF), over full operating temperature range 6
ON/OFF pin input current, regulator OFF IH 5 15 μA VLOGIC = 2.5 V (regulator OFF) 6
ON/OFF pin input current, regulator ON IL 0.02 5 μA VLOGIC = 0.5 V (regulator ON) 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper copper area connected to this pin must be kept to a minimum. 3

CAD (KiCad official)

  • Symbol: LM2594HVM-3.3
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm2594hvm-3-3-etched.step / lm2594hvm-3-3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2594hvm-3-3.step / lm2594hvm-3-3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 f4ff0460f0a09cf3, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF