3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLM2594HVM-3.3
Texas Instruments · DC-DC Converters · SOIC-8
LM2594HVM-3.3 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection; the datasheet's figure footnote says NC pins have no internal connection but must be soldered to the PCB for best heat transfer. |
| 2 | NC | unconnected | No connection; the datasheet's figure footnote says NC pins have no internal connection but must be soldered to the PCB for best heat transfer. |
| 3 | NC | unconnected | No connection; the datasheet's figure footnote says NC pins have no internal connection but must be soldered to the PCB for best heat transfer. |
| 4 | Feedback | input | Senses the regulated output voltage to complete the feedback loop; the feedback pin voltage is limited to −0.3 V to 25 V. |
| 5 | ON/OFF | input | Shuts the regulator down with logic levels: pulling below about 1.3 V turns it on and pulling above 1.3 V (maximum 25 V) shuts it down, dropping total input supply current to about 80 µA. |
| 6 | Ground | power_in | Circuit ground. |
| 7 | +VIN | power_in | Positive input supply for the switching regulator (4.5 V to 60 V for the LM2594HV); a suitable input bypass capacitor must be present at this pin. |
| 8 | Output | output | Internal switch output that swings between (+VIN − VSAT) and approximately −0.5 V at a duty cycle of VOUT/VIN; keep the PCB copper area on this pin to a minimum to limit coupling to sensitive circuitry. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (LM2594HV) | 60 | V | 4 | ||||
| ON/OFF pin input voltage | -0.3 | 25 | V | 4 | |||
| Feedback pin voltage | -0.3 | 25 | V | 4 | |||
| Output voltage to ground (steady state) | -1 | V | 4 | ||||
| Lead temperature, vapor phase (60 s), D8 package | 215 | °C | Vapor phase (60 s) | 4 | |||
| Lead temperature, infrared (15 s), D8 package | 220 | °C | Infrared (15 s) | 4 | |||
| Maximum junction temperature | 150 | °C | 4 | ||||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage (LM2594HV) | 4.5 | 60 | V | 4 | |||
| Operating temperature | -40 | 125 | °C | 4 | |||
| Junction-to-ambient thermal resistance, D (SOIC) package | RθJA | 150 | °C/W | JESD 51-7, 4-layer JEDEC board | 4 | ||
| Output voltage, 3.3 V version | VOUT | 3.168 | 3.3 | 3.432 | V | 4.75 V ≤ VIN ≤ VINmax, 0.1 A ≤ ILOAD ≤ 0.5 A, TJ = 25°C | 5 |
| Output voltage, 3.3 V version, over full operating temperature range | VOUT | 3.135 | 3.465 | V | 4.75 V ≤ VIN ≤ VINmax, 0.1 A ≤ ILOAD ≤ 0.5 A, over full operating temperature range | 5 | |
| Oscillator frequency | fO | 127 | 150 | 173 | kHz | TJ = 25°C | 6 |
| Oscillator frequency, over full operating temperature range | fO | 110 | 173 | kHz | Over full operating temperature range | 6 | |
| Saturation voltage | VSAT | 0.9 | 1.1 | V | IOUT = 0.5 A, TJ = 25°C | 6 | |
| Saturation voltage, over full operating temperature range | VSAT | 1.2 | V | IOUT = 0.5 A, over full operating temperature range | 6 | ||
| Max duty cycle (ON) | DC | 100 | % | 6 | |||
| Min duty cycle (OFF) | 0 | % | 6 | ||||
| Current limit, peak current | ICL | 0.65 | 0.8 | 1.3 | A | Peak current, TJ = 25°C | 6 |
| Current limit, peak current, over full operating temperature range | ICL | 0.58 | 1.4 | A | Peak current, over full operating temperature range | 6 | |
| Output leakage current, output = 0 V | IL | 50 | μA | Output = 0 V | 6 | ||
| Output leakage current, output = -1 V | IL | 2 | 15 | mA | Output = -1 V | 6 | |
| Quiescent current | IQ | 5 | 10 | mA | Feedback pin connected to 12 V (switch forced OFF) | 6 | |
| Standby quiescent current (LM2594HV) | ISTBY | 140 | 250 | μA | ON/OFF pin = 5 V (OFF), TJ = 25°C | 6 | |
| Standby quiescent current (LM2594HV), over full operating temperature range | ISTBY | 300 | μA | ON/OFF pin = 5 V (OFF), over full operating temperature range | 6 | ||
| ON/OFF pin logic input threshold voltage | VIH | 1.3 | V | 6 | |||
| ON/OFF pin threshold, low (regulator ON), over full operating temperature range | 0.6 | V | Low (regulator ON), over full operating temperature range | 6 | |||
| ON/OFF pin threshold, high (regulator OFF), over full operating temperature range | VIL | 2 | V | High (regulator OFF), over full operating temperature range | 6 | ||
| ON/OFF pin input current, regulator OFF | IH | 5 | 15 | μA | VLOGIC = 2.5 V (regulator OFF) | 6 | |
| ON/OFF pin input current, regulator ON | IL | 0.02 | 5 | μA | VLOGIC = 0.5 V (regulator ON) | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | copper area connected to this pin must be kept to a minimum. | 3 |
CAD (KiCad official)
- Symbol:
LM2594HVM-3.3 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm2594hvm-3-3-etched.step/lm2594hvm-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2594hvm-3-3.step/lm2594hvm-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
f4ff0460f0a09cf3, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).