3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAH3782-SA-7
Diodes Incorporated · Hall Sensor · SOT-23
AH3782-SA-7 from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input, specified for operation from 3.0V to 28V, with a Zener clamp on the supply and an absolute maximum transient of 32V and reverse supply of -0.3V. |
| 2 | GND | power_in | Ground reference connection for the device. |
| 3 | OUTPUT | output | Open-drain-style output with an internal pull-up of 10 to 18 kΩ that is switched on (pulled low) by a South pole at the part marking side, with a continuous output current of 60 mA maximum, an output current limit of 30 to 55 mA, an off-state voltage of 32V maximum, and a Zener clamp on the output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23 |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output On Voltage | VOUT_ON | 0.2 | 0.4 | V | IOUT = 20mA, B > BOP | 3 | |
| Output Leakage Current | IOUT_OFF | 15 | µA | VOUT = 28V, B < BRP, Output off | 3 | ||
| Supply Current | IDD | 3.8 | 4.9 | mA | Output open, VDD = 12V, TA = 25°C | 3 | |
| Supply Current | IDD | 3.8 | 5.8 | mA | Output open, TA = -40°C to +125°C | 3 | |
| Internal Pull-Up Resistance | RPU | 10 | 14 | 18 | kΩ | TA = -40°C to 125°C | 3 |
| Output Rising Time | tr | 0.2 | 1 | µs | RL =1kΩ, CL = 20pF | 3 | |
| Output Falling Time | tf | 0.1 | 1 | µs | RL =1kΩ, CL = 20pF | 3 | |
| Output Current Limit | IOCL | 30 | 55 | mA | B > BOP, (Note 10) | 3 | |
| Zener Clamp Voltage | VZ | 28 | V | IDD = 5mA | 3 | ||
| Operation Point (BOP) | BOP | 40 | Gauss | VDD = 12V, TA = +25°C | 4 | ||
| Operation Point (BOP) | BOP | 20 | 40 | 60 | Gauss | TA = -40°C to +125°C | 4 |
| Release Point (BRP) | BRP | -40 | Gauss | VDD = 12V, TA = +25°C | 4 | ||
| Release Point (BRP) | BRP | -60 | -40 | -20 | Gauss | TA = -40°C to +125°C | 4 |
| Hysteresis (/BOPX/-/BRPX/) | BHY | 40 | 80 | 120 | Gauss | TA = -40°C to +125°C | 4 |
| Supply Voltage | VDD | 3 | 28 | V | Operating | 3 | |
| Operating Temperature Range | TA | -40 | 125 | °C | Operating | 3 | |
| Supply Voltage (Note 6) | VDD | 32 | V | Transient stress rating, Note 6 | 3 | ||
| Reverse Supply Voltage | VDDR | -0.3 | V | 3 | |||
| Output Off Voltage (Note 6) | VOUT_MAX | 32 | V | Note 6 | 3 | ||
| Continuous Output Current | IOUT | 60 | mA | 3 | |||
| Package Power Dissipation | PD | 230 | mW | SC59 and SOT23 package | 3 | ||
| Storage Temperature Range | Ts | -65 | 165 | °C | 3 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Electrostatic Discharge Withstand Capability (HBM) | ESD | 6 | kV | Human Body Model | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | ESD Electrostatic Discharge Withstand Capability - Human Body Model 6 kV Notes: 5. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
AH3782-SA-7 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.4 mm, terminals on the pads, 0.975 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ah3782-sa-7-etched.step/ah3782-sa-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ah3782-sa-7.step/ah3782-sa-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (14 pp, sha256
9245a440631bc04e, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).