main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ah3782-sa-7: viewers rendered from the public page · Ray
ah3782-sa-7-etched.glb ah3782-sa-7: factory component page (tier=mfr) · Ray
ah3782-sa-7-etched.step ah3782-sa-7: factory component page (tier=mfr) · Ray
ah3782-sa-7-hero.glb ah3782-sa-7: hero GLB from the etched model (keeps the MPN mark) · Ray
ah3782-sa-7-hero.overlay.json ah3782-sa-7: hero GLB from the etched model (keeps the MPN mark) · Ray
ah3782-sa-7.glb Publish 0.1.0 · Ray
ah3782-sa-7.kicad_mod Publish 0.1.0 · Ray
ah3782-sa-7.kicad_sym Publish 0.1.0 · Ray
ah3782-sa-7.lbr Publish 0.1.0 · Ray
ah3782-sa-7.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 3 pins · Ray

AH3782-SA-7

Diodes Incorporated · Hall Sensor · SOT-23

AH3782-SA-7 from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VDD power_in Power supply input, specified for operation from 3.0V to 28V, with a Zener clamp on the supply and an absolute maximum transient of 32V and reverse supply of -0.3V.
2 GND power_in Ground reference connection for the device.
3 OUTPUT output Open-drain-style output with an internal pull-up of 10 to 18 kΩ that is switched on (pulled low) by a South pole at the part marking side, with a continuous output current of 60 mA maximum, an output current limit of 30 to 55 mA, an off-state voltage of 32V maximum, and a Zener clamp on the output.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SOT-23
Category Sensors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output On Voltage VOUT_ON 0.2 0.4 V IOUT = 20mA, B > BOP 3
Output Leakage Current IOUT_OFF 15 µA VOUT = 28V, B < BRP, Output off 3
Supply Current IDD 3.8 4.9 mA Output open, VDD = 12V, TA = 25°C 3
Supply Current IDD 3.8 5.8 mA Output open, TA = -40°C to +125°C 3
Internal Pull-Up Resistance RPU 10 14 18 kΩ TA = -40°C to 125°C 3
Output Rising Time tr 0.2 1 µs RL =1kΩ, CL = 20pF 3
Output Falling Time tf 0.1 1 µs RL =1kΩ, CL = 20pF 3
Output Current Limit IOCL 30 55 mA B > BOP, (Note 10) 3
Zener Clamp Voltage VZ 28 V IDD = 5mA 3
Operation Point (BOP) BOP 40 Gauss VDD = 12V, TA = +25°C 4
Operation Point (BOP) BOP 20 40 60 Gauss TA = -40°C to +125°C 4
Release Point (BRP) BRP -40 Gauss VDD = 12V, TA = +25°C 4
Release Point (BRP) BRP -60 -40 -20 Gauss TA = -40°C to +125°C 4
Hysteresis (/BOPX/-/BRPX/) BHY 40 80 120 Gauss TA = -40°C to +125°C 4
Supply Voltage VDD 3 28 V Operating 3
Operating Temperature Range TA -40 125 °C Operating 3
Supply Voltage (Note 6) VDD 32 V Transient stress rating, Note 6 3
Reverse Supply Voltage VDDR -0.3 V 3
Output Off Voltage (Note 6) VOUT_MAX 32 V Note 6 3
Continuous Output Current IOUT 60 mA 3
Package Power Dissipation PD 230 mW SC59 and SOT23 package 3
Storage Temperature Range Ts -65 165 °C 3
Maximum Junction Temperature TJ 150 °C 3
Electrostatic Discharge Withstand Capability (HBM) ESD 6 kV Human Body Model 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Abs ESD Electrostatic Discharge Withstand Capability - Human Body Model 6 kV Notes: 5. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: AH3782-SA-7
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.4 mm, terminals on the pads, 0.975 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ah3782-sa-7-etched.step / ah3782-sa-7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ah3782-sa-7.step / ah3782-sa-7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (14 pp, sha256 9245a440631bc04e, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF