Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS62150RGTR

Texas Instruments · DC-DC Converters · VQFN-16-EP(3x3)

TPS62150RGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch node connected to the internal MOSFET switches; the inductor connects between SW and the output capacitor, with an absolute maximum pin voltage of -0.3 V to VIN + 0.3 V.
2 SW output Switch node connected to the internal MOSFET switches; the inductor connects between SW and the output capacitor, with an absolute maximum pin voltage of -0.3 V to VIN + 0.3 V.
3 SW output Switch node connected to the internal MOSFET switches; the inductor connects between SW and the output capacitor, with an absolute maximum pin voltage of -0.3 V to VIN + 0.3 V.
4 PG output Open-drain power-good output (high = VOUT ready, low = VOUT below nominal regulation) that requires a pullup resistor to a voltage below 7 V and can sink 2 mA while holding its specified logic-low level.
5 FB input Voltage feedback input of the adjustable version, connected to a resistive divider from VOUT and regulated to 800 mV; it should be connected to AGND on fixed-output versions for improved thermal performance.
6 AGND power_in Analog ground that must be connected directly to the exposed thermal pad and the common ground plane.
7 FSW input Switching-frequency select input (low ≈ 2.5 MHz, high ≈ 1.25 MHz) that must start low to limit inrush current, with a maximum pin voltage of 7 V.
8 DEF input Output-voltage scaling input (low = nominal, high = nominal + 5%) with a maximum pin voltage of 7 V; the recommended high connection is VOUT rather than VIN.
9 SS/TR input Soft-start and tracking pin, where an external capacitor sets the internal reference rise time and the pin source current is 2.3 µA to 2.7 µA (2.5 µA typ.).
10 AVIN input Supply voltage for the control circuitry, which must be connected to the same source as PVIN, with a recommended input range of 3 V to 17 V.
11 PVIN input Supply voltage for the power stage, which must be connected to the same source as AVIN, with a recommended input range of 3 V to 17 V.
12 PVIN input Supply voltage for the power stage, which must be connected to the same source as AVIN, with a recommended input range of 3 V to 17 V.
13 EN input Enable input (high = enabled, low = disabled) with an internal pulldown of about 400 kΩ and an absolute maximum pin voltage of VIN + 0.3 V.
14 VOS input Output voltage sense pin and connection for the control loop circuitry, which should be connected in the shortest way to VOUT at the output capacitor.
15 PGND power_in Power ground that must be connected directly to the exposed thermal pad and the common ground plane.
16 PGND power_in Power ground that must be connected directly to the exposed thermal pad and the common ground plane.
17 Exposed Thermal Pad passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-16-EP(3x3)
Category Power Management (PMIC)
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage, VIN (at AVIN and PVIN) VIN 3 17 V 4
Operating junction temperature TJ -40 125 °C 4
Pin voltage AVIN, PVIN -0.3 20 V 4
Pin voltage EN, SS/TR -0.3 V 4
Pin voltage SW -0.3 V 4
Pin voltage DEF, FSW, FB, PG, VOS -0.3 7 V 4
Power-good sink current PG 10 mA 4
Operating junction temperature, TJ TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
VIN Input voltage range(1) VIN 3 17 V 5
Operating quiescent current IQ 17 30 µA EN = High, IOUT = 0 mA, device not switching 5
Operating quiescent current IQ 17 25 µA TA = -40°C to +85°C 5
Shutdown current(2) ISD 1.5 25 µA EN = Low 5
Shutdown current(2) ISD 1.5 4 µA TA = -40°C to +85°C 5
Undervoltage lockout threshold VUVLO 2.6 2.7 2.8 V Falling input voltage (PWM mode operation) 5
High level input threshold voltage (EN, DEF, FSW) VH 0.9 V 5
Low level input threshold voltage (EN, DEF, FSW) VL 0.3 V 5
Input leakage current (EN, DEF, FSW) ILKG 0.01 1 µA EN = VIN or GND; DEF, FSW = VOUT or GND 5
Power-good threshold voltage VTH_PG 92 95 98 %VOUT Rising (%VOUT) 5
Power-good threshold voltage VTH_PG 87 90 94 %VOUT Falling (%VOUT) 5
Power-good output low voltage VOL_PG 0.07 0.3 V IPG = -2 mA 5
Input leakage current (PG) ILKG_PG 1 400 nA VPG = 1.8 V 5
SS/TR pin source current ISS/TR 2.3 2.5 2.7 µA 5
High-side MOSFET ON-resistance rDS(on) 90 170 mΩ VIN ≥ 6 V 5
Low-side MOSFET ON-resistance rDS(on) 40 70 mΩ VIN ≥ 6 V 5
High-side MOSFET forward current limit(3) ILIMF 1.4 1.7 2.2 A VIN = 12 V, TA = 25°C 5
Input leakage current (FB) ILKG_FB 1 100 nA TPS62150, VFB = 0.8 V 5
Output voltage range (TPS62150) VOUT 0.9 6 V VIN ≥ VOUT 5
Initial output voltage accuracy(4) 785.6 800 814.4 mV PWM mode operation, VIN ≥ VOUT + 1 V 5
Initial output voltage accuracy(4) 788 800 812.8 mV PWM mode operation, VIN ≥ VOUT + 1 V, TA = -10°C to 85°C 5
Initial output voltage accuracy(4) 781.6 800 822.4 mV Power Save Mode operation, COUT = 22 µF 5
Junction-to-ambient thermal resistance RθJA 45 °C/W 4
Junction-to-case(top) thermal resistance RθJC(top) 53.6 °C/W 4
Junction-to-board thermal resistance RθJB 17.4 °C/W 4
Junction-to-top characterization parameter ψJT 1.1 °C/W 4
Junction-to-board characterization parameter ψJB 17.4 °C/W 4
Junction-to-case(bottom) thermal resistance RθJC(bot) 4.5 °C/W 4

CAD (KiCad official)

  • Symbol: TPS62150RGTR
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tps62150rgtr-etched.step / tps62150rgtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps62150rgtr.step / tps62150rgtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 b146908d5c550566, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF