Generated by kicad-footprint-generator · KiCad file format 20260206
TPS62150RGTR
Texas Instruments · DC-DC Converters · VQFN-16-EP(3x3)
TPS62150RGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch node connected to the internal MOSFET switches; the inductor connects between SW and the output capacitor, with an absolute maximum pin voltage of -0.3 V to VIN + 0.3 V. |
| 2 | SW | output | Switch node connected to the internal MOSFET switches; the inductor connects between SW and the output capacitor, with an absolute maximum pin voltage of -0.3 V to VIN + 0.3 V. |
| 3 | SW | output | Switch node connected to the internal MOSFET switches; the inductor connects between SW and the output capacitor, with an absolute maximum pin voltage of -0.3 V to VIN + 0.3 V. |
| 4 | PG | output | Open-drain power-good output (high = VOUT ready, low = VOUT below nominal regulation) that requires a pullup resistor to a voltage below 7 V and can sink 2 mA while holding its specified logic-low level. |
| 5 | FB | input | Voltage feedback input of the adjustable version, connected to a resistive divider from VOUT and regulated to 800 mV; it should be connected to AGND on fixed-output versions for improved thermal performance. |
| 6 | AGND | power_in | Analog ground that must be connected directly to the exposed thermal pad and the common ground plane. |
| 7 | FSW | input | Switching-frequency select input (low ≈ 2.5 MHz, high ≈ 1.25 MHz) that must start low to limit inrush current, with a maximum pin voltage of 7 V. |
| 8 | DEF | input | Output-voltage scaling input (low = nominal, high = nominal + 5%) with a maximum pin voltage of 7 V; the recommended high connection is VOUT rather than VIN. |
| 9 | SS/TR | input | Soft-start and tracking pin, where an external capacitor sets the internal reference rise time and the pin source current is 2.3 µA to 2.7 µA (2.5 µA typ.). |
| 10 | AVIN | input | Supply voltage for the control circuitry, which must be connected to the same source as PVIN, with a recommended input range of 3 V to 17 V. |
| 11 | PVIN | input | Supply voltage for the power stage, which must be connected to the same source as AVIN, with a recommended input range of 3 V to 17 V. |
| 12 | PVIN | input | Supply voltage for the power stage, which must be connected to the same source as AVIN, with a recommended input range of 3 V to 17 V. |
| 13 | EN | input | Enable input (high = enabled, low = disabled) with an internal pulldown of about 400 kΩ and an absolute maximum pin voltage of VIN + 0.3 V. |
| 14 | VOS | input | Output voltage sense pin and connection for the control loop circuitry, which should be connected in the shortest way to VOUT at the output capacitor. |
| 15 | PGND | power_in | Power ground that must be connected directly to the exposed thermal pad and the common ground plane. |
| 16 | PGND | power_in | Power ground that must be connected directly to the exposed thermal pad and the common ground plane. |
| 17 | Exposed Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-16-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage, VIN (at AVIN and PVIN) | VIN | 3 | 17 | V | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Pin voltage AVIN, PVIN | -0.3 | 20 | V | 4 | |||
| Pin voltage EN, SS/TR | -0.3 | V | 4 | ||||
| Pin voltage SW | -0.3 | V | 4 | ||||
| Pin voltage DEF, FSW, FB, PG, VOS | -0.3 | 7 | V | 4 | |||
| Power-good sink current PG | 10 | mA | 4 | ||||
| Operating junction temperature, TJ | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| VIN Input voltage range(1) | VIN | 3 | 17 | V | 5 | ||
| Operating quiescent current | IQ | 17 | 30 | µA | EN = High, IOUT = 0 mA, device not switching | 5 | |
| Operating quiescent current | IQ | 17 | 25 | µA | TA = -40°C to +85°C | 5 | |
| Shutdown current(2) | ISD | 1.5 | 25 | µA | EN = Low | 5 | |
| Shutdown current(2) | ISD | 1.5 | 4 | µA | TA = -40°C to +85°C | 5 | |
| Undervoltage lockout threshold | VUVLO | 2.6 | 2.7 | 2.8 | V | Falling input voltage (PWM mode operation) | 5 |
| High level input threshold voltage (EN, DEF, FSW) | VH | 0.9 | V | 5 | |||
| Low level input threshold voltage (EN, DEF, FSW) | VL | 0.3 | V | 5 | |||
| Input leakage current (EN, DEF, FSW) | ILKG | 0.01 | 1 | µA | EN = VIN or GND; DEF, FSW = VOUT or GND | 5 | |
| Power-good threshold voltage | VTH_PG | 92 | 95 | 98 | %VOUT | Rising (%VOUT) | 5 |
| Power-good threshold voltage | VTH_PG | 87 | 90 | 94 | %VOUT | Falling (%VOUT) | 5 |
| Power-good output low voltage | VOL_PG | 0.07 | 0.3 | V | IPG = -2 mA | 5 | |
| Input leakage current (PG) | ILKG_PG | 1 | 400 | nA | VPG = 1.8 V | 5 | |
| SS/TR pin source current | ISS/TR | 2.3 | 2.5 | 2.7 | µA | 5 | |
| High-side MOSFET ON-resistance | rDS(on) | 90 | 170 | mΩ | VIN ≥ 6 V | 5 | |
| Low-side MOSFET ON-resistance | rDS(on) | 40 | 70 | mΩ | VIN ≥ 6 V | 5 | |
| High-side MOSFET forward current limit(3) | ILIMF | 1.4 | 1.7 | 2.2 | A | VIN = 12 V, TA = 25°C | 5 |
| Input leakage current (FB) | ILKG_FB | 1 | 100 | nA | TPS62150, VFB = 0.8 V | 5 | |
| Output voltage range (TPS62150) | VOUT | 0.9 | 6 | V | VIN ≥ VOUT | 5 | |
| Initial output voltage accuracy(4) | 785.6 | 800 | 814.4 | mV | PWM mode operation, VIN ≥ VOUT + 1 V | 5 | |
| Initial output voltage accuracy(4) | 788 | 800 | 812.8 | mV | PWM mode operation, VIN ≥ VOUT + 1 V, TA = -10°C to 85°C | 5 | |
| Initial output voltage accuracy(4) | 781.6 | 800 | 822.4 | mV | Power Save Mode operation, COUT = 22 µF | 5 | |
| Junction-to-ambient thermal resistance | RθJA | 45 | °C/W | 4 | |||
| Junction-to-case(top) thermal resistance | RθJC(top) | 53.6 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 17.4 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 1.1 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 17.4 | °C/W | 4 | |||
| Junction-to-case(bottom) thermal resistance | RθJC(bot) | 4.5 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
TPS62150RGTR - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tps62150rgtr-etched.step/tps62150rgtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62150rgtr.step/tps62150rgtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
b146908d5c550566, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).