component
TPS54225PWPR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS54225PWPR
Texas Instruments · DC-DC Converters · HTSSOP-14
TPS54225PWPR from Texas Instruments, in a HTSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VO | input | Connect to output of converter; this pin is used for On-Time Adjustment. |
| 2 | VFB | input | Converter feedback input; connect with feedback resistor divider. |
| 3 | VREG5 | power_out | 5.5 V internal power supply output; a capacitor (typical 1 uF) should be connected to GND. |
| 4 | SS | passive | Soft-start control pin; an external capacitor should be connected to GND to set the slow-start time. |
| 5 | GND | power_in | Signal ground pin. |
| 6 | PG | output | Open drain power good output. |
| 7 | EN | input | Enable control input. |
| 8 | PGND1 | power_in | Ground return for low-side MOSFET; also serves as input of a current comparator, and should be connected strongly together with PGND near the IC. |
| 9 | PGND2 | power_in | Ground return for low-side MOSFET; also serves as input of a current comparator, and should be connected strongly together with PGND near the IC. |
| 10 | SW1 | output | Switch node connection between high-side NFET and low-side NFET; also serves as an input to a current comparator. |
| 11 | SW2 | output | Switch node connection between high-side NFET and low-side NFET; also serves as an input to a current comparator. |
| 12 | VBST | power_in | Supply input for the high-side NFET gate driver (boost terminal); a capacitor should be connected from this pin to the respective SW1, SW2 terminals, and an internal PN diode connects VREG5 to this pin. |
| 13 | VIN | power_in | Power input, connected to the high-side NFET drain. |
| 14 | VCC | power_in | Supply input for the 5 V internal linear regulator that powers the control circuitry. |
| 15 | PowerPAD | power_in | Thermal pad of the package (back side); must be soldered to achieve appropriate dissipation and should be connected to PGND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14 |
| Category | Power Management (PMIC) |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
TPS54225PWPR - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
tps54225pwpr-etched.step/tps54225pwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps54225pwpr.step/tps54225pwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
3c3ac317d4ab1b65, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).