3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownXC6221A252MR
Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25
XC6221A252MR from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input with an operating voltage range of 1.6V to 6.0V, and a 1.0µF input capacitor (CIN) should be connected between VIN and VSS for stable power input. |
| 2 | VSS | power_in | Ground pin, which serves as the 0V reference for the regulator and the CE and output circuits. |
| 3 | CE | input | ON/OFF control: a high level of 1.2V to 6.0V enables the output and a low level of 0.3V or less shuts it down, and on the XC6221A/B an open CE pin makes the output voltage unstable. |
| 4 | NC | unconnected | No connection; this pin is not connected internally on the SOT-25 package. |
| 5 | VOUT | power_out | Regulated output rated for up to 200mA minimum, which requires an output capacitor CL for phase compensation whose value depends on the output voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (Standard), 2.50V nominal | VOUT(E) | 2.45 | 2.55 | V | VCE=VIN, IOUT=10mA, VOUT(T)>1.50V; value from output voltage chart | 5 | |
| Current Limit | ILIM | 200 | 250 | mA | VCE=VIN | 5 | |
| Output Current | IOUTMAX | 200 | 250 | mA | VCE=VIN, VIN=VOUT(T)+1.0V, 0.80V<VOUT(T)<5.00V | 5 | |
| Dropout Voltage | Vdif | 95 | 170 | mV | VCE=VIN, IOUT=100mA; value from voltage chart for 2.50V | 5 | |
| Load Regulation | UVOUT | 10 | 40 | mV | VCE=VIN, 0.1mA IOUT 100mA | 5 | |
| Supply Current | IDD | 25 | 50 | μA | VCE=VIN, VIN=VOUT(T)+1.0V | 5 | |
| Standby Current | ISTB | 0.01 | 0.1 | μA | VIN=6.0V, VCE=VSS | 5 | |
| Line Regulation | UVOUT / (UVIN VOUT) | 0.01 | 0.2 | %/V | VOUT(T)+0.5V VIN 6.0V, 1.10V VOUT(T), VCE=VIN, IOUT=10mA | 5 | |
| Input Voltage | VIN | 1.6 | 6 | V | 5 | ||
| Output Voltage Temperature Characteristics | UVOUT / (UTopr VOUT) | -100 | 100 | ppm/°C | VCE=VIN, IOUT=30mA, -40<Topr<85 | 5 | |
| Ripple Rejection Rate | PSRR | 60 | dB | VCE=VIN, IOUT=30mA, f=1kHz | 5 | ||
| CE High Level Current (XC6221A/B) | ICEH | -0.1 | 0.1 | μA | VCE=VIN (XC6221A/B) | 5 | |
| CE Low Level Current | ICEL | -0.1 | 0.1 | μA | VCE=VSS | 5 | |
| CE High Level Voltage | VCEH | 1.2 | 6 | V | 5 | ||
| CE Low Level Voltage | VCEL | 0.3 | V | 5 | |||
| Operating Ambient Temperature | Topr | -40 | 85 | °C | 4 | ||
| Storage Temperature | Tstg | -55 | 125 | °C | 4 | ||
| Input Voltage (absolute maximum) | VIN | -0.3 | 6.5 | V | Relative to VSS | 4 | |
| Output Current | IOUT | 400 | mA | Note *1: IOUT Pd / (VIN-VOUT) | 4 | ||
| Output Voltage (absolute maximum) | VOUT | -0.3 | V | Relative to VSS; upper limit printed as VIN + 0.3 V | 4 | ||
| CE Input Voltage (absolute maximum) | VCE | -0.3 | 6.5 | V | Relative to VSS | 4 | |
| Power Dissipation SOT-25 | Pd | 250 | mW | SOT-25 | 4 | ||
| Power Dissipation SOT-25 (PCB mounted) | Pd | 600 | mW | SOT-25, PCB mounted (Note *2) | 4 | ||
| Short Current | ISHORT | 30 | mA | VCE=VIN, VOUT short-circuited at VSS level | 5 | ||
| Thermal Resistance (SOT-25, board mount) | 166.67 | °C/W | Board mount, Tj max 125°C | 22 | |||
| Recommended Output Capacitor CL | CL | 1 | μF | Output voltage 1.40V to 4.00V; except USPN-4 package | 8 | ||
| Recommended Input Capacitor CIN | CIN | 1 | μF | Between VIN and VSS | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | The USPN-4 package has for terminals. Each terminal connects one copper block in the front and | 24 |
CAD (KiCad official)
- Symbol:
XC6221A252MR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
xc6221a252mr-etched.step/xc6221a252mr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6221a252mr.step/xc6221a252mr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (28 pp, sha256
23da86d0214dc214, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).