main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers xc6221a252mr: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray
xc6221a252mr-etched.glb Publish 0.1.0 · Ray
xc6221a252mr-etched.step xc6221a252mr: factory component page (tier=lcsc) · Ray
xc6221a252mr-hero.glb xc6221a252mr: hero GLB from the etched model (keeps the MPN mark) · Ray
xc6221a252mr-hero.overlay.json Publish 0.1.0 · Ray
xc6221a252mr.glb Publish 0.1.0 · Ray
xc6221a252mr.kicad_mod Publish 0.1.0 · Ray
xc6221a252mr.kicad_sym Publish 0.1.0 · Ray
xc6221a252mr.lbr Publish 0.1.0 · Ray
xc6221a252mr.step Publish 0.1.0 · Ray

XC6221A252MR

Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25

XC6221A252MR from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power input with an operating voltage range of 1.6V to 6.0V, and a 1.0µF input capacitor (CIN) should be connected between VIN and VSS for stable power input.
2 VSS power_in Ground pin, which serves as the 0V reference for the regulator and the CE and output circuits.
3 CE input ON/OFF control: a high level of 1.2V to 6.0V enables the output and a low level of 0.3V or less shuts it down, and on the XC6221A/B an open CE pin makes the output voltage unstable.
4 NC unconnected No connection; this pin is not connected internally on the SOT-25 package.
5 VOUT power_out Regulated output rated for up to 200mA minimum, which requires an output capacitor CL for phase compensation whose value depends on the output voltage.

Key specifications

Parameter Value
Manufacturer Torex Semicon
Package SOT-25
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (Standard), 2.50V nominal VOUT(E) 2.45 2.55 V VCE=VIN, IOUT=10mA, VOUT(T)>1.50V; value from output voltage chart 5
Current Limit ILIM 200 250 mA VCE=VIN 5
Output Current IOUTMAX 200 250 mA VCE=VIN, VIN=VOUT(T)+1.0V, 0.80V<VOUT(T)<5.00V 5
Dropout Voltage Vdif 95 170 mV VCE=VIN, IOUT=100mA; value from voltage chart for 2.50V 5
Load Regulation UVOUT 10 40 mV VCE=VIN, 0.1mA IOUT 100mA 5
Supply Current IDD 25 50 μA VCE=VIN, VIN=VOUT(T)+1.0V 5
Standby Current ISTB 0.01 0.1 μA VIN=6.0V, VCE=VSS 5
Line Regulation UVOUT / (UVIN VOUT) 0.01 0.2 %/V VOUT(T)+0.5V VIN 6.0V, 1.10V VOUT(T), VCE=VIN, IOUT=10mA 5
Input Voltage VIN 1.6 6 V 5
Output Voltage Temperature Characteristics UVOUT / (UTopr VOUT) -100 100 ppm/°C VCE=VIN, IOUT=30mA, -40<Topr<85 5
Ripple Rejection Rate PSRR 60 dB VCE=VIN, IOUT=30mA, f=1kHz 5
CE High Level Current (XC6221A/B) ICEH -0.1 0.1 μA VCE=VIN (XC6221A/B) 5
CE Low Level Current ICEL -0.1 0.1 μA VCE=VSS 5
CE High Level Voltage VCEH 1.2 6 V 5
CE Low Level Voltage VCEL 0.3 V 5
Operating Ambient Temperature Topr -40 85 °C 4
Storage Temperature Tstg -55 125 °C 4
Input Voltage (absolute maximum) VIN -0.3 6.5 V Relative to VSS 4
Output Current IOUT 400 mA Note *1: IOUT Pd / (VIN-VOUT) 4
Output Voltage (absolute maximum) VOUT -0.3 V Relative to VSS; upper limit printed as VIN + 0.3 V 4
CE Input Voltage (absolute maximum) VCE -0.3 6.5 V Relative to VSS 4
Power Dissipation SOT-25 Pd 250 mW SOT-25 4
Power Dissipation SOT-25 (PCB mounted) Pd 600 mW SOT-25, PCB mounted (Note *2) 4
Short Current ISHORT 30 mA VCE=VIN, VOUT short-circuited at VSS level 5
Thermal Resistance (SOT-25, board mount) 166.67 °C/W Board mount, Tj max 125°C 22
Recommended Output Capacitor CL CL 1 μF Output voltage 1.40V to 4.00V; except USPN-4 package 8
Recommended Input Capacitor CIN CIN 1 μF Between VIN and VSS 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper The USPN-4 package has for terminals. Each terminal connects one copper block in the front and 24

CAD (KiCad official)

  • Symbol: XC6221A252MR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-25 (KiCad packages3D, STEP)
  • 3D model files: xc6221a252mr-etched.step / xc6221a252mr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xc6221a252mr.step / xc6221a252mr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Torex Semicon datasheet (28 pp, sha256 23da86d0214dc214, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF