Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT8392EUFD#PBF

Analog Devices · Power Management ICs · QFN-28-EP(4x5)

LT8392EUFD#PBF from Analog Devices, in a QFN-28-EP(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TG1 output Buck Side Top Gate Drive.
2 LSP input Positive Terminal of the Buck Side Inductor Current Sense Resistor (RSENSE).
3 LSN input Negative Terminal of the Buck Side Inductor Current Sense Resistor (RSENSE).
4 VIN power_in Input Supply.
5 INTVCC power_out Internal 5V Linear Regulator Output.
6 EN/UVLO input Enable and Undervoltage Lockout.
7 TEST passive Factory Test.
8 TRIM passive Factory Trim.
9 VREF power_out Voltage Reference Output.
10 CTRL input Control Input for ISP/ISN Current Sense Threshold.
11 ISP input Positive Terminal of the ISP/ISN Current Sense Resistor (RIS).
12 ISN input Negative Terminal of the ISP/ISN Current Sense Resistor (RIS).
13 ISMON output ISP/ISN Current Sense Monitor Output.
14 ~{PGOOD} open_collector Power Good Open Drain Output. Pulled low when FB is within ±8% of the final regulation voltage; needs an external pull-up.
15 SS passive Soft-Start Timer Setting.
16 FB input Voltage Loop Feedback Input.
17 VC output Error Amplifier Output to Set Inductor Current Comparator Threshold.
18 RT passive Switching Frequency Setting.
19 SYNC/SPRD input Switching Frequency Synchronization or Spread Spectrum.
20 EXTVCC power_in Second Input Supply for Powering INTVCC.
21 VOUT power_in Output Supply.
22 TG2 output Boost Side Top Gate Drive.
23 SW2 passive Boost Side Switch Node.
24 BST2 passive Boost Side Bootstrap Floating Driver Supply.
25 BG2 output Boost Side Bottom Gate Drive.
26 BG1 output Buck Side Bottom Gate Drive.
27 BST1 passive Buck Side Bootstrap Floating Driver Supply.
28 SW1 passive Buck Side Switch Node.
29 GND power_in Exposed pad, ground: 'EXPOSED PAD (PIN 29) IS GND, MUST BE SOLDERED TO PCB'.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package QFN-28-EP(4x5)
Category Power Management ICs
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN, EN/UVLO, VOUT, ISP, ISN 60 V 2
(ISP-ISN) -1 1 V 2
BST1, BST2 66 V 2
SW1, SW2, LSP, LSN -6 60 V 2
INTVCC, (BST1-SW1), (BST2-SW2) 6 V 2
(BST1-LSP), (BST1-LSN) 6 V 2
EXTVCC 40 V 2
FB, TRIM, SYNC/SPRD, CTRL, PGOOD 6 V 2
Storage Temperature Range -65 150 °C 2
Operating Junction Temperature Range (LT8392E) -40 125 °C LT8392E 2
VIN Operating Voltage Range 4 60 V EXTVCC = 0V 3
VIN Operating Voltage Range 3 60 V EXTVCC = 8V 3
VIN Shutdown Current 1 2 µA VEN/UVLO = 0.3V 3
VIN Active Current (Not Switching) 2 3 mA VEN/UVLO = 1.5V, EXTVCC = 0V 3
VIN Active Current (Not Switching) 250 500 µA VEN/UVLO = 1.5V, EXTVCC = 8V 3
EXTVCC Voltage Range 0 40 V 3
EXTVCC Shutdown Current 0.1 0.5 µA VEN/UVLO = 0.3V, EXTVCC = 8V 3
VOUT Voltage Range 0 60 V 3
INTVCC Regulation Voltage 4.8 5 5.2 V IINTVCC = 20mA 3
INTVCC Current Limit 130 190 250 mA VINTVCC = 4.5V 3
INTVCC Undervoltage Lockout Threshold 3.34 3.54 3.74 V Falling 3
VREF Regulation Voltage 1.96 2 2.04 V IVREF = 100µA 3
VREF Current Limit 2 2.5 3.2 mA VREF = 1.8V 3
EN/UVLO Shutdown Threshold 0.3 0.6 1 V 3
EN/UVLO Enable Threshold 1.196 1.22 1.244 V Falling 3
EN/UVLO Hysteresis Current 2.1 2.5 2.9 µA VEN/UVLO = 1.1V 3
EN/UVLO Hysteresis Current -0.1 0 0.1 µA VEN/UVLO = 1.3V 3
Full-Scale Current Regulation V(ISP-ISN) 48 50 52 mV VCTRL = 2V, VISP = 12V 3
1/10th Current Regulation V(ISP-ISN) 3 5 7 mV VCTRL = 0.35V, VISP = 12V 3
ISMON Monitor Output VISMON 1.15 1.25 1.35 V V(ISP-ISN) = 50mV, VISP = 12V/0V 3
ISMON Monitor Output VISMON 0.3 0.35 0.4 V V(ISP-ISN) = 5mV, VISP = 12V/0V 3
ISMON Monitor Output VISMON 0.2 0.25 0.3 V V(ISP-ISN) = 0mV, VISP = 12V/0V 3
ISP/ISN Input Common Mode Range 0 60 V 3
FB Regulation Voltage 0.985 1 1.015 V VC = 1.2V 3
FB Line Regulation 0.2 0.5 % VIN = 4V to 60V 3
FB Load Regulation 0.2 0.8 % 4
FB Input Bias Current 20 40 nA FB in regulation, Current out of Pin 4
Maximum Current Sense Threshold V(LSP-LSN) 35 50 65 mV Buck, VFB = 0.8V 4
Maximum Current Sense Threshold V(LSP-LSN) 40 50 60 mV Boost, VFB = 0.8V 4
FB Short Threshold (VFB) VFB 0.23 0.25 0.27 V Falling 4
FB Short Hysteresis 35 50 65 mV 4
PGOOD Upper Threshold 6 8 10 % Offset from VFB Rising 4
PGOOD Lower Threshold -10 -8 -6 % Offset from VFB Falling 4
SS Pull-Up Current 10 12.5 15 µA VSS = 0V 4
SS Pull-Down Current 1 1.25 1.5 µA VSS = 2V 4
Switching Frequency 380 400 420 kHz VSYNC/SPRD = 0V, RT = 100kΩ 4
SYNC Frequency 150 650 kHz 4
Highest Spread Spectrum Above Oscillator Frequency 12 15 18 % VSYNC/SPRD = 5V 4
Lowest Spread Spectrum Below Oscillator Frequency -18 -15 -12 % VSYNC/SPRD = 5V 4
SYNC/SPRD Threshold Voltage 0.4 1.5 V 4
PGOOD Pull-Down Resistance 100 200 Ω 4
SS Hard Pull-Down Resistance 100 200 Ω VEN/UVLO = 1.1V 4
INTVCC UVLO hysteresis skipped placeholder 0.22 V 3
TG1, TG2 Gate Driver On-Resistance Gate Pull-Up 2.6 Ω V(BST-SW) = 5V 4
TG1, TG2 Gate Driver On-Resistance Gate Pull-Down 1.4 Ω V(BST-SW) = 5V 4
BG1, BG2 Gate Driver On-Resistance Gate Pull-Up 3.2 Ω VINTVCC = 5V 4
BG1, BG2 Gate Driver On-Resistance Gate Pull-Down 1.2 Ω VINTVCC = 5V 4
Thermal Resistance Junction-to-Ambient (UFD package) θJA 43 °C/W UFD package 2
Thermal Resistance Junction-to-Case (UFD package) θJC 3.4 °C/W UFD package 2

CAD (KiCad official)

  • Symbol: LT8392EUFD#PBF
  • Footprint: Package_DFN_QFN:QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm
  • 3D model: QFN-28-EP(4x5) (KiCad packages3D, STEP)
  • 3D model files: lt8392eufd-etched.step / lt8392eufd-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8392eufd.step / lt8392eufd.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (28 pp, sha256 3c6bb89a8f92a869, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF