Generated by kicad-footprint-generator · KiCad file format 20260206
LT8392EUFD#PBF
Analog Devices · Power Management ICs · QFN-28-EP(4x5)
LT8392EUFD#PBF from Analog Devices, in a QFN-28-EP(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TG1 | output | Buck Side Top Gate Drive. |
| 2 | LSP | input | Positive Terminal of the Buck Side Inductor Current Sense Resistor (RSENSE). |
| 3 | LSN | input | Negative Terminal of the Buck Side Inductor Current Sense Resistor (RSENSE). |
| 4 | VIN | power_in | Input Supply. |
| 5 | INTVCC | power_out | Internal 5V Linear Regulator Output. |
| 6 | EN/UVLO | input | Enable and Undervoltage Lockout. |
| 7 | TEST | passive | Factory Test. |
| 8 | TRIM | passive | Factory Trim. |
| 9 | VREF | power_out | Voltage Reference Output. |
| 10 | CTRL | input | Control Input for ISP/ISN Current Sense Threshold. |
| 11 | ISP | input | Positive Terminal of the ISP/ISN Current Sense Resistor (RIS). |
| 12 | ISN | input | Negative Terminal of the ISP/ISN Current Sense Resistor (RIS). |
| 13 | ISMON | output | ISP/ISN Current Sense Monitor Output. |
| 14 | ~{PGOOD} | open_collector | Power Good Open Drain Output. Pulled low when FB is within ±8% of the final regulation voltage; needs an external pull-up. |
| 15 | SS | passive | Soft-Start Timer Setting. |
| 16 | FB | input | Voltage Loop Feedback Input. |
| 17 | VC | output | Error Amplifier Output to Set Inductor Current Comparator Threshold. |
| 18 | RT | passive | Switching Frequency Setting. |
| 19 | SYNC/SPRD | input | Switching Frequency Synchronization or Spread Spectrum. |
| 20 | EXTVCC | power_in | Second Input Supply for Powering INTVCC. |
| 21 | VOUT | power_in | Output Supply. |
| 22 | TG2 | output | Boost Side Top Gate Drive. |
| 23 | SW2 | passive | Boost Side Switch Node. |
| 24 | BST2 | passive | Boost Side Bootstrap Floating Driver Supply. |
| 25 | BG2 | output | Boost Side Bottom Gate Drive. |
| 26 | BG1 | output | Buck Side Bottom Gate Drive. |
| 27 | BST1 | passive | Buck Side Bootstrap Floating Driver Supply. |
| 28 | SW1 | passive | Buck Side Switch Node. |
| 29 | GND | power_in | Exposed pad, ground: 'EXPOSED PAD (PIN 29) IS GND, MUST BE SOLDERED TO PCB'. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | QFN-28-EP(4x5) |
| Category | Power Management ICs |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN, EN/UVLO, VOUT, ISP, ISN | 60 | V | 2 | ||||
| (ISP-ISN) | -1 | 1 | V | 2 | |||
| BST1, BST2 | 66 | V | 2 | ||||
| SW1, SW2, LSP, LSN | -6 | 60 | V | 2 | |||
| INTVCC, (BST1-SW1), (BST2-SW2) | 6 | V | 2 | ||||
| (BST1-LSP), (BST1-LSN) | 6 | V | 2 | ||||
| EXTVCC | 40 | V | 2 | ||||
| FB, TRIM, SYNC/SPRD, CTRL, PGOOD | 6 | V | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Operating Junction Temperature Range (LT8392E) | -40 | 125 | °C | LT8392E | 2 | ||
| VIN Operating Voltage Range | 4 | 60 | V | EXTVCC = 0V | 3 | ||
| VIN Operating Voltage Range | 3 | 60 | V | EXTVCC = 8V | 3 | ||
| VIN Shutdown Current | 1 | 2 | µA | VEN/UVLO = 0.3V | 3 | ||
| VIN Active Current (Not Switching) | 2 | 3 | mA | VEN/UVLO = 1.5V, EXTVCC = 0V | 3 | ||
| VIN Active Current (Not Switching) | 250 | 500 | µA | VEN/UVLO = 1.5V, EXTVCC = 8V | 3 | ||
| EXTVCC Voltage Range | 0 | 40 | V | 3 | |||
| EXTVCC Shutdown Current | 0.1 | 0.5 | µA | VEN/UVLO = 0.3V, EXTVCC = 8V | 3 | ||
| VOUT Voltage Range | 0 | 60 | V | 3 | |||
| INTVCC Regulation Voltage | 4.8 | 5 | 5.2 | V | IINTVCC = 20mA | 3 | |
| INTVCC Current Limit | 130 | 190 | 250 | mA | VINTVCC = 4.5V | 3 | |
| INTVCC Undervoltage Lockout Threshold | 3.34 | 3.54 | 3.74 | V | Falling | 3 | |
| VREF Regulation Voltage | 1.96 | 2 | 2.04 | V | IVREF = 100µA | 3 | |
| VREF Current Limit | 2 | 2.5 | 3.2 | mA | VREF = 1.8V | 3 | |
| EN/UVLO Shutdown Threshold | 0.3 | 0.6 | 1 | V | 3 | ||
| EN/UVLO Enable Threshold | 1.196 | 1.22 | 1.244 | V | Falling | 3 | |
| EN/UVLO Hysteresis Current | 2.1 | 2.5 | 2.9 | µA | VEN/UVLO = 1.1V | 3 | |
| EN/UVLO Hysteresis Current | -0.1 | 0 | 0.1 | µA | VEN/UVLO = 1.3V | 3 | |
| Full-Scale Current Regulation V(ISP-ISN) | 48 | 50 | 52 | mV | VCTRL = 2V, VISP = 12V | 3 | |
| 1/10th Current Regulation V(ISP-ISN) | 3 | 5 | 7 | mV | VCTRL = 0.35V, VISP = 12V | 3 | |
| ISMON Monitor Output | VISMON | 1.15 | 1.25 | 1.35 | V | V(ISP-ISN) = 50mV, VISP = 12V/0V | 3 |
| ISMON Monitor Output | VISMON | 0.3 | 0.35 | 0.4 | V | V(ISP-ISN) = 5mV, VISP = 12V/0V | 3 |
| ISMON Monitor Output | VISMON | 0.2 | 0.25 | 0.3 | V | V(ISP-ISN) = 0mV, VISP = 12V/0V | 3 |
| ISP/ISN Input Common Mode Range | 0 | 60 | V | 3 | |||
| FB Regulation Voltage | 0.985 | 1 | 1.015 | V | VC = 1.2V | 3 | |
| FB Line Regulation | 0.2 | 0.5 | % | VIN = 4V to 60V | 3 | ||
| FB Load Regulation | 0.2 | 0.8 | % | 4 | |||
| FB Input Bias Current | 20 | 40 | nA | FB in regulation, Current out of Pin | 4 | ||
| Maximum Current Sense Threshold | V(LSP-LSN) | 35 | 50 | 65 | mV | Buck, VFB = 0.8V | 4 |
| Maximum Current Sense Threshold | V(LSP-LSN) | 40 | 50 | 60 | mV | Boost, VFB = 0.8V | 4 |
| FB Short Threshold (VFB) | VFB | 0.23 | 0.25 | 0.27 | V | Falling | 4 |
| FB Short Hysteresis | 35 | 50 | 65 | mV | 4 | ||
| PGOOD Upper Threshold | 6 | 8 | 10 | % | Offset from VFB Rising | 4 | |
| PGOOD Lower Threshold | -10 | -8 | -6 | % | Offset from VFB Falling | 4 | |
| SS Pull-Up Current | 10 | 12.5 | 15 | µA | VSS = 0V | 4 | |
| SS Pull-Down Current | 1 | 1.25 | 1.5 | µA | VSS = 2V | 4 | |
| Switching Frequency | 380 | 400 | 420 | kHz | VSYNC/SPRD = 0V, RT = 100kΩ | 4 | |
| SYNC Frequency | 150 | 650 | kHz | 4 | |||
| Highest Spread Spectrum Above Oscillator Frequency | 12 | 15 | 18 | % | VSYNC/SPRD = 5V | 4 | |
| Lowest Spread Spectrum Below Oscillator Frequency | -18 | -15 | -12 | % | VSYNC/SPRD = 5V | 4 | |
| SYNC/SPRD Threshold Voltage | 0.4 | 1.5 | V | 4 | |||
| PGOOD Pull-Down Resistance | 100 | 200 | Ω | 4 | |||
| SS Hard Pull-Down Resistance | 100 | 200 | Ω | VEN/UVLO = 1.1V | 4 | ||
| INTVCC UVLO hysteresis skipped placeholder | 0.22 | V | 3 | ||||
| TG1, TG2 Gate Driver On-Resistance Gate Pull-Up | 2.6 | Ω | V(BST-SW) = 5V | 4 | |||
| TG1, TG2 Gate Driver On-Resistance Gate Pull-Down | 1.4 | Ω | V(BST-SW) = 5V | 4 | |||
| BG1, BG2 Gate Driver On-Resistance Gate Pull-Up | 3.2 | Ω | VINTVCC = 5V | 4 | |||
| BG1, BG2 Gate Driver On-Resistance Gate Pull-Down | 1.2 | Ω | VINTVCC = 5V | 4 | |||
| Thermal Resistance Junction-to-Ambient (UFD package) | θJA | 43 | °C/W | UFD package | 2 | ||
| Thermal Resistance Junction-to-Case (UFD package) | θJC | 3.4 | °C/W | UFD package | 2 |
CAD (KiCad official)
- Symbol:
LT8392EUFD#PBF - Footprint:
Package_DFN_QFN:QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm - 3D model: QFN-28-EP(4x5) (KiCad packages3D, STEP)
- 3D model files:
lt8392eufd-etched.step/lt8392eufd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8392eufd.step/lt8392eufd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (28 pp, sha256
3c6bb89a8f92a869, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).