Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC44F20YML-TR

Microchip Tech · Gate Drive ICs · DFN-8-EP(2x2)

MIC44F20YML-TR from Microchip Tech, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Driver output; redundant OUT pin (paired with pin 8) that lowers driver impedance, with peak sink/source current of 6 A.
2 VDD power_in Supply input for operation from 4.5V to 12.6V (absolute maximum +13V).
3 NC unconnected No connect.
4 IN input Logic input; for the MIC44F20 logic-high produces a low output and logic-low produces a high output (when enabled), with VIH typ 1.7V and VIL typ 1.53V.
5 EN/UVLO input Enable/undervoltage lockout input; pulling below the 1.4V typ enable threshold disables the driver (output low for MIC44F20), floating enables it with the internal 4.2V UVLO, and a resistor divider sets a different UVLO threshold.
6 GND power_in Ground.
7 GND power_in Ground.
8 OUT output Driver output; redundant OUT pin (paired with pin 1) that lowers driver impedance, with peak sink/source current of 6 A.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package DFN-8-EP(2x2)
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VDD 4.5 12.6 V 4
High Output Quiescent Current IS 2.5 mA VIN = 0V (MIC44F19/20) 4
Low Output Quiescent Current IS 2.5 mA VIN = 5V (MIC44F19/20) 4
Shutdown Current ISD 200 µA VEN = 0V 4
Enable Threshold VEN 1.3 1.4 1.5 V 4
Undervoltage Lockout Threshold (Internally Set) VUVLO 3.6 4.2 4.4 V VEN = open, VDD rising. 4
Input Voltage Range VIN 0 V Steady State Voltage, Note 2 4
Logic 1 Input Voltage VIH 1.615 1.7 1.785 V TA = +25°C (±5%) 4
Logic 1 Input Voltage VIH 1.53 1.7 1.87 V Over temperature range (±10%) 4
Logic 0 Input Voltage VIL 1.45 1.53 1.607 V TA = +25°C (±5%) 4
Logic 0 Input Voltage VIL 1.377 1.53 1.683 V Over temperature range (±10%) 4
Input Current IIN 5 µA 4.5V ≤ VIN ≤ 10V 4
Output Low Voltage VOL 0.025 V See Functional Block Diagram 4
Output Resistance, Output High RO 2 Ω IOUT = 100 mA, VDD = 12V 4
Output Resistance, Output High RO 3 Ω IOUT = 100 mA, VDD = 5V 4
Output Resistance, Output Low RO 2 Ω IOUT = 100 mA, VDD = 12V 4
Output Resistance, Output Low RO 3 Ω IOUT = 100 mA, VDD = 5V 4
Peak Output Sink Current IPEAK 6 A VDD = 12V 4
Peak Output Source Current IPEAK 6 A VS = 12V 4
Latch-Up Protection Withstand Reverse Current IR 500 mA 4
Rise Time tR 10 20 ns VS = 12V, CL = 1000 pF 5
Fall Time tF 10 20 ns VS = 12V, CL = 1000 pF 5
Delay Time tD1 15 35 ns VS = 12V, CL = 1000 pF 5
Delay Time tD2 13 35 ns VS = 12V, CL = 1000 pF 5
Pulse Width tPW 50 ns VS = 12V 5
Supply Voltage VDD 13 V 3
UVLO/Enable Voltage VUVLO/EN 13 V 3
Output Voltage VOUT 13 V 3
Operating Supply Voltage VDD 4.5 12.6 V Operating Ratings 3
Operating Junction Temperature TJ 125 °C 6
Maximum Junction Temperature 150 °C 6
Storage Temperature Range TDD -65 150 °C 6
Lead Temperature 300 °C Soldering, 10s 6
Enable Hysteresis VEN_HYS 120 mV 4
UVLO Hysteresis 370 mV 4

CAD (KiCad official)

  • Symbol: MIC44F20YML-TR
  • Footprint: Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm
  • 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: mic44f20yml-tr-etched.step / mic44f20yml-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic44f20yml-tr.step / mic44f20yml-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (26 pp, sha256 efe1885fdfddcd8d, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF