Generated by kicad-footprint-generator · KiCad file format 20260206
MIC44F20YML-TR
Microchip Tech · Gate Drive ICs · DFN-8-EP(2x2)
MIC44F20YML-TR from Microchip Tech, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Driver output; redundant OUT pin (paired with pin 8) that lowers driver impedance, with peak sink/source current of 6 A. |
| 2 | VDD | power_in | Supply input for operation from 4.5V to 12.6V (absolute maximum +13V). |
| 3 | NC | unconnected | No connect. |
| 4 | IN | input | Logic input; for the MIC44F20 logic-high produces a low output and logic-low produces a high output (when enabled), with VIH typ 1.7V and VIL typ 1.53V. |
| 5 | EN/UVLO | input | Enable/undervoltage lockout input; pulling below the 1.4V typ enable threshold disables the driver (output low for MIC44F20), floating enables it with the internal 4.2V UVLO, and a resistor divider sets a different UVLO threshold. |
| 6 | GND | power_in | Ground. |
| 7 | GND | power_in | Ground. |
| 8 | OUT | output | Driver output; redundant OUT pin (paired with pin 1) that lowers driver impedance, with peak sink/source current of 6 A. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | DFN-8-EP(2x2) |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VDD | 4.5 | 12.6 | V | 4 | ||
| High Output Quiescent Current | IS | 2.5 | mA | VIN = 0V (MIC44F19/20) | 4 | ||
| Low Output Quiescent Current | IS | 2.5 | mA | VIN = 5V (MIC44F19/20) | 4 | ||
| Shutdown Current | ISD | 200 | µA | VEN = 0V | 4 | ||
| Enable Threshold | VEN | 1.3 | 1.4 | 1.5 | V | 4 | |
| Undervoltage Lockout Threshold (Internally Set) | VUVLO | 3.6 | 4.2 | 4.4 | V | VEN = open, VDD rising. | 4 |
| Input Voltage Range | VIN | 0 | V | Steady State Voltage, Note 2 | 4 | ||
| Logic 1 Input Voltage | VIH | 1.615 | 1.7 | 1.785 | V | TA = +25°C (±5%) | 4 |
| Logic 1 Input Voltage | VIH | 1.53 | 1.7 | 1.87 | V | Over temperature range (±10%) | 4 |
| Logic 0 Input Voltage | VIL | 1.45 | 1.53 | 1.607 | V | TA = +25°C (±5%) | 4 |
| Logic 0 Input Voltage | VIL | 1.377 | 1.53 | 1.683 | V | Over temperature range (±10%) | 4 |
| Input Current | IIN | 5 | µA | 4.5V ≤ VIN ≤ 10V | 4 | ||
| Output Low Voltage | VOL | 0.025 | V | See Functional Block Diagram | 4 | ||
| Output Resistance, Output High | RO | 2 | Ω | IOUT = 100 mA, VDD = 12V | 4 | ||
| Output Resistance, Output High | RO | 3 | Ω | IOUT = 100 mA, VDD = 5V | 4 | ||
| Output Resistance, Output Low | RO | 2 | Ω | IOUT = 100 mA, VDD = 12V | 4 | ||
| Output Resistance, Output Low | RO | 3 | Ω | IOUT = 100 mA, VDD = 5V | 4 | ||
| Peak Output Sink Current | IPEAK | 6 | A | VDD = 12V | 4 | ||
| Peak Output Source Current | IPEAK | 6 | A | VS = 12V | 4 | ||
| Latch-Up Protection Withstand Reverse Current | IR | 500 | mA | 4 | |||
| Rise Time | tR | 10 | 20 | ns | VS = 12V, CL = 1000 pF | 5 | |
| Fall Time | tF | 10 | 20 | ns | VS = 12V, CL = 1000 pF | 5 | |
| Delay Time | tD1 | 15 | 35 | ns | VS = 12V, CL = 1000 pF | 5 | |
| Delay Time | tD2 | 13 | 35 | ns | VS = 12V, CL = 1000 pF | 5 | |
| Pulse Width | tPW | 50 | ns | VS = 12V | 5 | ||
| Supply Voltage | VDD | 13 | V | 3 | |||
| UVLO/Enable Voltage | VUVLO/EN | 13 | V | 3 | |||
| Output Voltage | VOUT | 13 | V | 3 | |||
| Operating Supply Voltage | VDD | 4.5 | 12.6 | V | Operating Ratings | 3 | |
| Operating Junction Temperature | TJ | 125 | °C | 6 | |||
| Maximum Junction Temperature | 150 | °C | 6 | ||||
| Storage Temperature Range | TDD | -65 | 150 | °C | 6 | ||
| Lead Temperature | 300 | °C | Soldering, 10s | 6 | |||
| Enable Hysteresis | VEN_HYS | 120 | mV | 4 | |||
| UVLO Hysteresis | 370 | mV | 4 |
CAD (KiCad official)
- Symbol:
MIC44F20YML-TR - Footprint:
Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm - 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
mic44f20yml-tr-etched.step/mic44f20yml-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic44f20yml-tr.step/mic44f20yml-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (26 pp, sha256
efe1885fdfddcd8d, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).