3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX3483ESA-HXY
HXY MOSFET · RS-485/RS-422 ICs · SOP-8
MAX3483ESA-HXY from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: driven high when A-B is at or above +0.2V and low when A-B is at or below -0.2V, with RO high-impedance when the receiver is disabled (RE high). |
| 2 | RE | input | Receiver enable input (active low per the operation table); bringing RE and DE both to the disabled state with RE high and DE low initiates low-power shutdown, with VIH of 2.0V minimum and VIL of 0.8V maximum. |
| 3 | DE | input | Driver enable input; driver outputs are high-impedance when DE is low, with VIH of 2.0V minimum and VIL of 0.8V maximum. |
| 4 | DI | input | Driver input that sets the differential output state of A and B; VIH of 2.0V minimum, VIL of 0.8V maximum, and input current of ±2µA. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | A | bidirectional | Non-inverting RS-485/RS-422 driver output and receiver input, rated -7.5V to +12.5V and protected to ±15kV ESD (IEC 1000-4-2 air-gap discharge, HBM). |
| 7 | B | bidirectional | Inverting RS-485/RS-422 driver output and receiver input, rated -7.5V to +12.5V and protected to ±15kV ESD (IEC 1000-4-2 air-gap discharge, HBM). |
| 8 | VCC | power_in | Single +3.3V supply (VCC = 3.3V ±0.3V per the DC characteristics); absolute maximum supply voltage is 7V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Communication Interface Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VCC) | VCC | 7 | V | 1 | |||
| Control Input Voltage | -0.3 | 7 | V | 1 | |||
| Driver Input Voltage (DI) | DI | -0.3 | 7 | V | 1 | ||
| Driver Output Voltage (A, B) | -7.5 | 12.5 | V | 1 | |||
| Receiver Input Voltage (A, B) | -7.5 | 12.5 | V | 1 | |||
| Receiver Output Voltage (RO) | RO | -0.3 | V | upper limit printed as (VCC + 0.3V) | 1 | ||
| Continuous Power Dissipation, 8-Pin SO | 471 | mW | TA = +70°C; derate 5.88mW/°C above +70°C | 1 | |||
| Operating Temperature Range | 0 | 70 | °C | 1 | |||
| Storage Temperature Range | -65 | 150 | °C | 1 | |||
| Lead Temperature (soldering, 10 sec) | 300 | °C | soldering, 10sec | 1 | |||
| Differential Driver Output (with load) | VOD2 | 2 | V | R = 54Ω (RS-422) | 2 | ||
| Differential Driver Output (with load) | VOD2 | 1.5 | V | R = 60Ω (RS-485) | 2 | ||
| Change in Magnitude of Driver Differential Output Voltage for Complementary Output States | ∆VOD | 0.2 | V | R = 54Ω or 100Ω | 2 | ||
| Driver Common-Mode Output Voltage | VOC | 3 | V | R = 54Ω or 100Ω | 2 | ||
| Change in Magnitude of Driver Common-Mode Output Voltage for Complementary Output States | ∆VOD | 0.2 | V | R = 54Ω or 100Ω | 2 | ||
| Input High Voltage | VIH | 2 | V | DE, DI, RE | 2 | ||
| Input Low Voltage | VIL | 0.8 | V | DE, DI, RE | 2 | ||
| Input Current | IIN1 | -2 | 2 | µA | DE, DI, RE | 2 | |
| Input Current (A, B) | IIN2 | 1 | mA | DE = 0V; VIN = 12V | 2 | ||
| Input Current (A, B) | IIN2 | -0.8 | mA | VCC = 0V or 5.25V, VIN = -7V | 2 | ||
| Receiver Differential Threshold Voltage | VTH | -0.2 | 0.2 | V | -7V ≤ VCM ≤ 12V | 2 | |
| Receiver Output Low Voltage | VOL | 0.4 | V | IO = 2.5mA, VID = -200mV | 2 | ||
| Three-State (high impedance) Output Current at Receiver | IOZR | -1 | 1 | µA | 0.4V ≤ VO ≤ 2.4V | 2 | |
| Maximum Data Rate | fMAX | 250 | kbps | VCC = 3.3V ±5%, TA = 25°C | 3 | ||
| Driver Propagation Delay Skew | /t PDS | -50 | 50 | ns | VCC = 3.3V ±5%, TA = 25°C | 3 | |
| Time to Shutdown | tSHDN | 80 | 190 | 300 | ns | VCC = 3.3V ±5%, TA = 25°C | 3 |
| Receiver Propagation Delay, Low-to-High Level | tRPLH | 25 | 75 | 120 | ns | VID = 0 to 3.0, CL = 15pF | 3 |
| Receiver Propagation Delay, High-to-Low Level | tRPHL | 25 | 75 | 120 | ns | VID = 0 to 3.0, CL = 15pF | 3 |
| /tPLH - tPHL/ Receiver Propagation Delay Skew | tRPDS | -20 | 12 | 20 | ns | VID = 0 to 3.0, CL = 15pF | 3 |
| Receiver Output Enable Time to Low Level | tPRZL | 25 | 50 | ns | CL = 15pF | 3 | |
| Receiver Output Enable Time to High Level | tPRZH | 25 | 50 | ns | CL = 15pF | 3 | |
| Receiver Output Disable Time from High Level | tPRHZ | 25 | 45 | ns | CL = 15pF | 3 | |
| Receiver Output Disable Time from Low Level | tPRLZ | 25 | 45 | ns | CL = 15pF | 3 | |
| Receiver Output Enable Time from Shutdown to Low Level | tPRSL | 720 | 1400 | ns | CL = 15pF | 3 | |
| Receiver Output Enable Time from Shutdown to High Level | tPRSH | 720 | 1400 | ns | CL = 15pF | 3 |
CAD (KiCad official)
- Symbol:
MAX3483ESA-HXY - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
max3483esa-hxy-etched.step/max3483esa-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3483esa-hxy.step/max3483esa-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (11 pp, sha256
3b0fb197720a7890, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).