main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers max3483esa-hxy: viewers · Ray
max3483esa-hxy-etched.glb Publish 0.1.0 · Ray
max3483esa-hxy-etched.step max3483esa-hxy: factory component page (tier=lcsc) · Ray
max3483esa-hxy-hero.glb max3483esa-hxy: hero GLB from the etched model (keeps the MPN mark) · Ray
max3483esa-hxy-hero.overlay.json Publish 0.1.0 · Ray
max3483esa-hxy.glb Publish 0.1.0 · Ray
max3483esa-hxy.kicad_mod Publish 0.1.0 · Ray
max3483esa-hxy.kicad_sym Publish 0.1.0 · Ray
max3483esa-hxy.lbr Publish 0.1.0 · Ray
max3483esa-hxy.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MAX3483ESA-HXY

HXY MOSFET · RS-485/RS-422 ICs · SOP-8

MAX3483ESA-HXY from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: driven high when A-B is at or above +0.2V and low when A-B is at or below -0.2V, with RO high-impedance when the receiver is disabled (RE high).
2 RE input Receiver enable input (active low per the operation table); bringing RE and DE both to the disabled state with RE high and DE low initiates low-power shutdown, with VIH of 2.0V minimum and VIL of 0.8V maximum.
3 DE input Driver enable input; driver outputs are high-impedance when DE is low, with VIH of 2.0V minimum and VIL of 0.8V maximum.
4 DI input Driver input that sets the differential output state of A and B; VIH of 2.0V minimum, VIL of 0.8V maximum, and input current of ±2µA.
5 GND power_in Ground reference for the device.
6 A bidirectional Non-inverting RS-485/RS-422 driver output and receiver input, rated -7.5V to +12.5V and protected to ±15kV ESD (IEC 1000-4-2 air-gap discharge, HBM).
7 B bidirectional Inverting RS-485/RS-422 driver output and receiver input, rated -7.5V to +12.5V and protected to ±15kV ESD (IEC 1000-4-2 air-gap discharge, HBM).
8 VCC power_in Single +3.3V supply (VCC = 3.3V ±0.3V per the DC characteristics); absolute maximum supply voltage is 7V.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package SOP-8
Category Communication Interface Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (VCC) VCC 7 V 1
Control Input Voltage -0.3 7 V 1
Driver Input Voltage (DI) DI -0.3 7 V 1
Driver Output Voltage (A, B) -7.5 12.5 V 1
Receiver Input Voltage (A, B) -7.5 12.5 V 1
Receiver Output Voltage (RO) RO -0.3 V upper limit printed as (VCC + 0.3V) 1
Continuous Power Dissipation, 8-Pin SO 471 mW TA = +70°C; derate 5.88mW/°C above +70°C 1
Operating Temperature Range 0 70 °C 1
Storage Temperature Range -65 150 °C 1
Lead Temperature (soldering, 10 sec) 300 °C soldering, 10sec 1
Differential Driver Output (with load) VOD2 2 V R = 54Ω (RS-422) 2
Differential Driver Output (with load) VOD2 1.5 V R = 60Ω (RS-485) 2
Change in Magnitude of Driver Differential Output Voltage for Complementary Output States ∆VOD 0.2 V R = 54Ω or 100Ω 2
Driver Common-Mode Output Voltage VOC 3 V R = 54Ω or 100Ω 2
Change in Magnitude of Driver Common-Mode Output Voltage for Complementary Output States ∆VOD 0.2 V R = 54Ω or 100Ω 2
Input High Voltage VIH 2 V DE, DI, RE 2
Input Low Voltage VIL 0.8 V DE, DI, RE 2
Input Current IIN1 -2 2 µA DE, DI, RE 2
Input Current (A, B) IIN2 1 mA DE = 0V; VIN = 12V 2
Input Current (A, B) IIN2 -0.8 mA VCC = 0V or 5.25V, VIN = -7V 2
Receiver Differential Threshold Voltage VTH -0.2 0.2 V -7V ≤ VCM ≤ 12V 2
Receiver Output Low Voltage VOL 0.4 V IO = 2.5mA, VID = -200mV 2
Three-State (high impedance) Output Current at Receiver IOZR -1 1 µA 0.4V ≤ VO ≤ 2.4V 2
Maximum Data Rate fMAX 250 kbps VCC = 3.3V ±5%, TA = 25°C 3
Driver Propagation Delay Skew /t PDS -50 50 ns VCC = 3.3V ±5%, TA = 25°C 3
Time to Shutdown tSHDN 80 190 300 ns VCC = 3.3V ±5%, TA = 25°C 3
Receiver Propagation Delay, Low-to-High Level tRPLH 25 75 120 ns VID = 0 to 3.0, CL = 15pF 3
Receiver Propagation Delay, High-to-Low Level tRPHL 25 75 120 ns VID = 0 to 3.0, CL = 15pF 3
/tPLH - tPHL/ Receiver Propagation Delay Skew tRPDS -20 12 20 ns VID = 0 to 3.0, CL = 15pF 3
Receiver Output Enable Time to Low Level tPRZL 25 50 ns CL = 15pF 3
Receiver Output Enable Time to High Level tPRZH 25 50 ns CL = 15pF 3
Receiver Output Disable Time from High Level tPRHZ 25 45 ns CL = 15pF 3
Receiver Output Disable Time from Low Level tPRLZ 25 45 ns CL = 15pF 3
Receiver Output Enable Time from Shutdown to Low Level tPRSL 720 1400 ns CL = 15pF 3
Receiver Output Enable Time from Shutdown to High Level tPRSH 720 1400 ns CL = 15pF 3

CAD (KiCad official)

  • Symbol: MAX3483ESA-HXY
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: max3483esa-hxy-etched.step / max3483esa-hxy-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3483esa-hxy.step / max3483esa-hxy.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (11 pp, sha256 3b0fb197720a7890, retrieved 2026-10-29, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF