main
Ray Publish 0.1.0 418a997
{
  "slug": "max3483esa-hxy",
  "version": "0.1.0",
  "type": "component",
  "description": "HXY MOSFET RS-485/RS-422 ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "communication interface chip",
    "max3483esa-hxy",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max3483esa-hxy.kicad_sym",
    "max3483esa-hxy.kicad_mod",
    "max3483esa-hxy.glb",
    "max3483esa-hxy.step",
    "max3483esa-hxy.lbr",
    "docs/hero.png",
    "docs/max3483esa-hxy-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max3483esa-hxy-hero.glb",
    "max3483esa-hxy-hero.overlay.json",
    "max3483esa-hxy-etched.glb"
  ],
  "component": {
    "mpn": "MAX3483ESA-HXY",
    "manufacturer": "HXY MOSFET",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Communication Interface Chip",
    "subcategory": "RS-485/RS-422 ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/5f6b13f433d974d8a9ef4a5aedc3f835.pdf",
    "parts": {
      "symbol": "max3483esa-hxy.kicad_sym",
      "footprint": "max3483esa-hxy.kicad_mod",
      "model_3d": "max3483esa-hxy-hero.glb",
      "model_3d_plain": "max3483esa-hxy-etched.glb",
      "model_3d_step": "max3483esa-hxy-etched.step",
      "model_3d_step_plain": "max3483esa-hxy.step",
      "lbr": "max3483esa-hxy.lbr"
    },
    "distributor_links": {
      "lcsc": "C22386562"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T00:14:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RO",
        "type": "output",
        "description": "Receiver output: driven high when A-B is at or above +0.2V and low when A-B is at or below -0.2V, with RO high-impedance when the receiver is disabled (RE high)."
      },
      {
        "number": "2",
        "name": "RE",
        "type": "input",
        "description": "Receiver enable input (active low per the operation table); bringing RE and DE both to the disabled state with RE high and DE low initiates low-power shutdown, with VIH of 2.0V minimum and VIL of 0.8V maximum."
      },
      {
        "number": "3",
        "name": "DE",
        "type": "input",
        "description": "Driver enable input; driver outputs are high-impedance when DE is low, with VIH of 2.0V minimum and VIL of 0.8V maximum."
      },
      {
        "number": "4",
        "name": "DI",
        "type": "input",
        "description": "Driver input that sets the differential output state of A and B; VIH of 2.0V minimum, VIL of 0.8V maximum, and input current of ±2µA."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "6",
        "name": "A",
        "type": "bidirectional",
        "description": "Non-inverting RS-485/RS-422 driver output and receiver input, rated -7.5V to +12.5V and protected to ±15kV ESD (IEC 1000-4-2 air-gap discharge, HBM)."
      },
      {
        "number": "7",
        "name": "B",
        "type": "bidirectional",
        "description": "Inverting RS-485/RS-422 driver output and receiver input, rated -7.5V to +12.5V and protected to ±15kV ESD (IEC 1000-4-2 air-gap discharge, HBM)."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Single +3.3V supply (VCC = 3.3V ±0.3V per the DC characteristics); absolute maximum supply voltage is 7V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet text has no explicit SO-8 pin table. The pin-number-to-function mapping was inferred f; Pin 6 as A and pin 7 as B are read from the operating-circuit callouts, which are ambiguous in the e; The datasheet is for MAX3483ESA; the MPN given is MAX3483ESA-HXY. The suffix is not explained in the"
        ],
        "pages_sent": 11,
        "cost_usd": 0.1269,
        "at": "2026-10-29T00:13:50"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/5f6b13f433d974d8a9ef4a5aedc3f835.pdf",
        "pages": 11,
        "sha256": "3b0fb197720a7890",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max3483esa-hxy.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max3483esa-hxy-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ee25d24a70362646404d4ea9220e9bf19187c5922f138c7b3684e670297d14b8",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}