3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV521DCKT
Texas Instruments · Operational Amplifier · SC-70-5
TLV521DCKT from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; the datasheet gives output sourcing current of 11 mA and sinking current of 12 mA (at the stated test conditions), and the OUT pin is limited to V− − 0.3 V to V+ + 0.3 V absolute maximum. |
| 2 | V- | power_in | Negative power supply pin; the device operates with VS = V+ − V− from 1.7 V to 5.5 V, with V− = 0 V in the electrical characteristics test conditions. |
| 3 | IN+ | input | Noninverting input; common-mode voltage range is 0 V to 3.3 V (CMRR ≥ 70 dB) at VS = 3.3 V, and differential input voltage is limited to ±300 mV absolute maximum. |
| 4 | IN- | input | Inverting input; same common-mode voltage range (0 V to 3.3 V, CMRR ≥ 70 dB) and ±300 mV absolute maximum differential input limit as IN+. |
| 5 | V+ | power_in | Positive power supply pin; supply is 1.7 V to 5.5 V above V−, and any pin is limited to 6 V relative to V−, with supply voltages above 6 V able to permanently damage the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Any pin relative to V- | -0.3 | 6 | V | Any pin relative to V- | 3 | ||
| Current into V+, V-, OUT pins | 40 | mA | V+, V-, OUT pins | 3 | |||
| Differential Input Voltage | VIN(diff) | -300 | 300 | mV | VIN+ - VIN- | 3 | |
| Junction Temperature | TJ | -40 | 150 | °C | 3 | ||
| Mounting Temperature | 260 | °C | Infrared or convection (30 sec.) | 3 | |||
| Wave Soldering Lead Temperature | 260 | °C | (4 sec.) | 3 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Temperature Range | -40 | 125 | °C | Over operating free-air temperature range | 3 | ||
| Supply Voltage (VS = V+ - V-) | VS | 1.7 | 5.5 | V | VS = V+ - V- | 3 | |
| Input Offset Voltage | VOS | -3 | 0.1 | 3 | mV | VCM = 0.3 V | 4 |
| Input Offset Voltage Drift | TCVOS | -1.5 | 1.5 | μV/°C | 4 | ||
| Common Mode Rejection Ratio | CMRR | 70 | 90 | dB | 0 V ≤ VCM ≤ 3.3 V | 4 | |
| Power Supply Rejection Ratio | PSRR | 80 | 100 | dB | V+ = 1.8 V to 3.3 V; VCM = 0.3 V | 4 | |
| Common Mode Voltage Range | 0 | 3.3 | V | CMRR ≥ 70 dB | 4 | ||
| Large Signal Voltage Gain | AVOL | 80 | 110 | dB | VO = 0.5 V to 2.8 V; RL = 100 kΩ to V+/2 | 4 | |
| Output Swing High (from rail) | VO | 3 | 50 | mV | RL = 100 kΩ to V+/2; VIN(diff) = 100 mV | 4 | |
| Output Swing Low (from rail) | VO | 2 | 50 | mV | RL = 100 kΩ to V+/2; VIN(diff) = -100 mV | 4 | |
| Supply Current | IS | 350 | 500 | nA | VCM = 0.3 V | 4 | |
| Input Bias Current | IBIAS | 1 | pA | 4 | |||
| Input Offset Current | IOS | 50 | fA | 4 | |||
| Common Mode Rejection Ratio | CMRR | 100 | dB | 0 V ≤ VCM ≤ 2.2 V | 4 | ||
| Output Current Sourcing | IO | 11 | mA | VO to V-; VIN(diff) = 100 mV | 4 | ||
| Output Current Sinking | IO | 12 | mA | VO to V+; VIN(diff) = -100 mV | 4 | ||
| Gain-Bandwidth Product | GBW | 6 | kHz | CL = 20 pF, RL = 100 kΩ | 5 | ||
| Slew Rate Falling Edge | SR | 2.9 | V/ms | AV = +1; VIN = 0 V to 3.3 V | 5 | ||
| Slew Rate Rising Edge | SR | 2.5 | V/ms | AV = +1; VIN = 0 V to 3.3 V | 5 | ||
| Phase Margin | θm | 73 | deg | CL = 20 pF, RL = 100 kΩ | 5 | ||
| Gain Margin | Gm | 19 | dB | CL = 20 pF, RL = 100 kΩ | 5 | ||
| Input-Referred Voltage Noise Density | en | 300 | nV/√Hz | f = 100 Hz | 5 | ||
| Input-Referred Voltage Noise | 22 | μVPP | 0.1 Hz to 10 Hz | 5 | |||
| Input-Referred Current Noise | In | 100 | fA/√Hz | f = 100 Hz | 5 | ||
| EMI Rejection Ratio, IN+ and IN- | EMIRR | 121 | dB | VRF_PEAK = 100 mVp (-20 dBp), f = 400 MHz | 5 | ||
| EMI Rejection Ratio, IN+ and IN- | EMIRR | 124 | dB | VRF_PEAK = 100 mVp (-20 dBp), f = 1800 MHz | 5 | ||
| EMI Rejection Ratio, IN+ and IN- | EMIRR | 142 | dB | VRF_PEAK = 100 mVp (-20 dBp), f = 2400 MHz | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 269.9 | °C/W | DCK (SC70) 5-pin | 3 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 93.7 | °C/W | DCK (SC70) 5-pin | 3 | ||
| Junction-to-board thermal resistance | RθJB | 48.8 | °C/W | DCK (SC70) 5-pin | 3 | ||
| Junction-to-top characterization parameter | ψJT | 2 | °C/W | DCK (SC70) 5-pin | 3 | ||
| Junction-to-board characterization parameter | ψJB | 47.9 | °C/W | DCK (SC70) 5-pin | 3 |
CAD (KiCad official)
- Symbol:
TLV521DCKT - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
tlv521dckt-etched.step/tlv521dckt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv521dckt.step/tlv521dckt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
7c42a92d34aabd9e, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).