Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV521DCKT

Texas Instruments · Operational Amplifier · SC-70-5

TLV521DCKT from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output; the datasheet gives output sourcing current of 11 mA and sinking current of 12 mA (at the stated test conditions), and the OUT pin is limited to V− − 0.3 V to V+ + 0.3 V absolute maximum.
2 V- power_in Negative power supply pin; the device operates with VS = V+ − V− from 1.7 V to 5.5 V, with V− = 0 V in the electrical characteristics test conditions.
3 IN+ input Noninverting input; common-mode voltage range is 0 V to 3.3 V (CMRR ≥ 70 dB) at VS = 3.3 V, and differential input voltage is limited to ±300 mV absolute maximum.
4 IN- input Inverting input; same common-mode voltage range (0 V to 3.3 V, CMRR ≥ 70 dB) and ±300 mV absolute maximum differential input limit as IN+.
5 V+ power_in Positive power supply pin; supply is 1.7 V to 5.5 V above V−, and any pin is limited to 6 V relative to V−, with supply voltages above 6 V able to permanently damage the device.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Any pin relative to V- -0.3 6 V Any pin relative to V- 3
Current into V+, V-, OUT pins 40 mA V+, V-, OUT pins 3
Differential Input Voltage VIN(diff) -300 300 mV VIN+ - VIN- 3
Junction Temperature TJ -40 150 °C 3
Mounting Temperature 260 °C Infrared or convection (30 sec.) 3
Wave Soldering Lead Temperature 260 °C (4 sec.) 3
Storage temperature Tstg -65 150 °C 3
Temperature Range -40 125 °C Over operating free-air temperature range 3
Supply Voltage (VS = V+ - V-) VS 1.7 5.5 V VS = V+ - V- 3
Input Offset Voltage VOS -3 0.1 3 mV VCM = 0.3 V 4
Input Offset Voltage Drift TCVOS -1.5 1.5 μV/°C 4
Common Mode Rejection Ratio CMRR 70 90 dB 0 V ≤ VCM ≤ 3.3 V 4
Power Supply Rejection Ratio PSRR 80 100 dB V+ = 1.8 V to 3.3 V; VCM = 0.3 V 4
Common Mode Voltage Range 0 3.3 V CMRR ≥ 70 dB 4
Large Signal Voltage Gain AVOL 80 110 dB VO = 0.5 V to 2.8 V; RL = 100 kΩ to V+/2 4
Output Swing High (from rail) VO 3 50 mV RL = 100 kΩ to V+/2; VIN(diff) = 100 mV 4
Output Swing Low (from rail) VO 2 50 mV RL = 100 kΩ to V+/2; VIN(diff) = -100 mV 4
Supply Current IS 350 500 nA VCM = 0.3 V 4
Input Bias Current IBIAS 1 pA 4
Input Offset Current IOS 50 fA 4
Common Mode Rejection Ratio CMRR 100 dB 0 V ≤ VCM ≤ 2.2 V 4
Output Current Sourcing IO 11 mA VO to V-; VIN(diff) = 100 mV 4
Output Current Sinking IO 12 mA VO to V+; VIN(diff) = -100 mV 4
Gain-Bandwidth Product GBW 6 kHz CL = 20 pF, RL = 100 kΩ 5
Slew Rate Falling Edge SR 2.9 V/ms AV = +1; VIN = 0 V to 3.3 V 5
Slew Rate Rising Edge SR 2.5 V/ms AV = +1; VIN = 0 V to 3.3 V 5
Phase Margin θm 73 deg CL = 20 pF, RL = 100 kΩ 5
Gain Margin Gm 19 dB CL = 20 pF, RL = 100 kΩ 5
Input-Referred Voltage Noise Density en 300 nV/√Hz f = 100 Hz 5
Input-Referred Voltage Noise 22 μVPP 0.1 Hz to 10 Hz 5
Input-Referred Current Noise In 100 fA/√Hz f = 100 Hz 5
EMI Rejection Ratio, IN+ and IN- EMIRR 121 dB VRF_PEAK = 100 mVp (-20 dBp), f = 400 MHz 5
EMI Rejection Ratio, IN+ and IN- EMIRR 124 dB VRF_PEAK = 100 mVp (-20 dBp), f = 1800 MHz 5
EMI Rejection Ratio, IN+ and IN- EMIRR 142 dB VRF_PEAK = 100 mVp (-20 dBp), f = 2400 MHz 5
Junction-to-ambient thermal resistance RθJA 269.9 °C/W DCK (SC70) 5-pin 3
Junction-to-case (top) thermal resistance RθJC(top) 93.7 °C/W DCK (SC70) 5-pin 3
Junction-to-board thermal resistance RθJB 48.8 °C/W DCK (SC70) 5-pin 3
Junction-to-top characterization parameter ψJT 2 °C/W DCK (SC70) 5-pin 3
Junction-to-board characterization parameter ψJB 47.9 °C/W DCK (SC70) 5-pin 3

CAD (KiCad official)

  • Symbol: TLV521DCKT
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: tlv521dckt-etched.step / tlv521dckt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv521dckt.step / tlv521dckt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 7c42a92d34aabd9e, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF