3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownISL9111EHADJZ-T7A
RENESAS · DC-DC Converters · SOT-23-6
ISL9111EHADJZ-T7A from RENESAS, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | The SW pin is the switching node of the power converter; connect one terminal of the inductor to SW and the other to the power input. |
| 2 | GND | power_in | System ground. |
| 3 | EN | input | EN is an active-high logic input: asserting it high starts the boost function, and asserting it low fully disables the device and blocks current flow between SW and the output; it should be tied high to enable or low to disable. |
| 4 | FB | input | Feedback pin of the converter; connect voltage divider resistors between VOUT, FB and GND to set the desired output voltage. |
| 5 | VOUT | power_out | Device output. |
| 6 | VIN | power_in | Device input supply pin; connect a 4.7µF ceramic capacitor to the power ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOT-23-6 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Operating Voltage after Start-up (ISL9111) | VUVLO | 0.68 | 0.7 | 0.76 | V | VEN = VIN, RLOAD = 50Ω | 6 |
| Output Voltage Range (ISL9111-ADJ) | VOUT | 2.5 | 5.25 | V | VIN < VOUT | 6 | |
| Feedback Voltage (ISL9111-ADJ) | VFB | 784 | 800 | 816 | mV | VOUT = 5V | 6 |
| Load Regulation | ΔVOUT/VOUT | -1.5 | 1.5 | % | ILOAD = 0 to 100mA | 7 | |
| Line Regulation | -1 | 1 | % | VIN = 0.8V to 1.6V, ILOAD = 1mA | 7 | ||
| N-Channel MOSFET Peak Current Limit | IPK | 0.8 | 1 | 1.2 | A | 6 | |
| PWM Switching Frequency | FOSC | 1 | 1.2 | 1.4 | MHz | 6 | |
| Minimum Start-up Voltage (ISL9111) | VMIN | 0.8 | 0.9 | V | VEN = VIN, RLOAD = 50Ω | 6 | |
| Maximum Duty Cycle | DMAX | 84 | 87.5 | % | 6 | ||
| Quiescent Current from VOUT | IQ1 | 20 | 45 | μA | No Load | 6 | |
| Shutdown Current from VIN | ISD | 0.5 | 2 | μA | VEN = 0V, VIN = 1.2V, VO = 0 | 6 | |
| Feedback Pin Input Current | 100 | nA | 6 | ||||
| Leakage Current at SW Pin | 1 | μA | VEN = 0V, VIN = 5V, VO = 0, TA = +25°C | 6 | |||
| N-Channel MOSFET ON-Resistance | 0.2 | Ω | VOUT = 5V | 6 | |||
| P-Channel MOSFET ON-Resistance | 0.35 | Ω | VOUT = 5V | 6 | |||
| Soft-Start-Up Time | 1 | ms | 6 | ||||
| Output Overvoltage Protection Threshold (ADJ Version Only) | 5.9 | V | ADJ version only | 7 | |||
| Output Overvoltage Protection Hysteresis (ADJ Version Only) | 400 | mV | ADJ version only | 7 | |||
| Thermal Shutdown | TSD | 150 | °C | 7 | |||
| Thermal Shutdown Hysteresis | 25 | °C | 7 | ||||
| VIN, EN, FAULT, VOUT voltage (absolute maximum) | VIN, EN, FAULT, VOUT | -0.3 | 6.5 | V | 6 | ||
| FB voltage (absolute maximum) | FB | -0.3 | 6.5 | V | 6 | ||
| SW Voltage DC (absolute maximum) | SW | -0.5 | 6.5 | V | DC | 6 | |
| SW Voltage pulse (absolute maximum) | SW | -0.5 | 8 | V | Pulse < 10ns | 6 | |
| ESD Human Body Model | 3 | kV | Tested per JESD22-A114F | 6 | |||
| ESD Machine Model | 250 | V | Tested per JESD22-A115-A | 6 | |||
| Thermal Resistance JA, 6 Ld SOT-23 | θJA | 146 | °C/W | Typical; component mounted on high effective thermal conductivity test board in free air | 6 | ||
| Junction Temperature Range | TJ | -20 | 125 | °C | 6 | ||
| Operating Temperature Range (ambient) | TA | -20 | 85 | °C | 6 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 6 | ||
| VIN recommended operating range | VIN | 0.8 | V | Maximum printed as VOUT - 200mV (formula, no numeric max) | 6 | ||
| Maximum DC Current from Input | 750 | mA | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ISL9111EHADJZ-T7A - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
isl9111ehadjz-t7a-etched.step/isl9111ehadjz-t7a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl9111ehadjz-t7a.step/isl9111ehadjz-t7a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (15 pp, sha256
c27134c4ffe9d262, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).