Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISL9111EHADJZ-T7A

RENESAS · DC-DC Converters · SOT-23-6

ISL9111EHADJZ-T7A from RENESAS, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 SW output The SW pin is the switching node of the power converter; connect one terminal of the inductor to SW and the other to the power input.
2 GND power_in System ground.
3 EN input EN is an active-high logic input: asserting it high starts the boost function, and asserting it low fully disables the device and blocks current flow between SW and the output; it should be tied high to enable or low to disable.
4 FB input Feedback pin of the converter; connect voltage divider resistors between VOUT, FB and GND to set the desired output voltage.
5 VOUT power_out Device output.
6 VIN power_in Device input supply pin; connect a 4.7µF ceramic capacitor to the power ground.

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOT-23-6
Category Power Management ICs
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Operating Voltage after Start-up (ISL9111) VUVLO 0.68 0.7 0.76 V VEN = VIN, RLOAD = 50Ω 6
Output Voltage Range (ISL9111-ADJ) VOUT 2.5 5.25 V VIN < VOUT 6
Feedback Voltage (ISL9111-ADJ) VFB 784 800 816 mV VOUT = 5V 6
Load Regulation ΔVOUT/VOUT -1.5 1.5 % ILOAD = 0 to 100mA 7
Line Regulation -1 1 % VIN = 0.8V to 1.6V, ILOAD = 1mA 7
N-Channel MOSFET Peak Current Limit IPK 0.8 1 1.2 A 6
PWM Switching Frequency FOSC 1 1.2 1.4 MHz 6
Minimum Start-up Voltage (ISL9111) VMIN 0.8 0.9 V VEN = VIN, RLOAD = 50Ω 6
Maximum Duty Cycle DMAX 84 87.5 % 6
Quiescent Current from VOUT IQ1 20 45 μA No Load 6
Shutdown Current from VIN ISD 0.5 2 μA VEN = 0V, VIN = 1.2V, VO = 0 6
Feedback Pin Input Current 100 nA 6
Leakage Current at SW Pin 1 μA VEN = 0V, VIN = 5V, VO = 0, TA = +25°C 6
N-Channel MOSFET ON-Resistance 0.2 Ω VOUT = 5V 6
P-Channel MOSFET ON-Resistance 0.35 Ω VOUT = 5V 6
Soft-Start-Up Time 1 ms 6
Output Overvoltage Protection Threshold (ADJ Version Only) 5.9 V ADJ version only 7
Output Overvoltage Protection Hysteresis (ADJ Version Only) 400 mV ADJ version only 7
Thermal Shutdown TSD 150 °C 7
Thermal Shutdown Hysteresis 25 °C 7
VIN, EN, FAULT, VOUT voltage (absolute maximum) VIN, EN, FAULT, VOUT -0.3 6.5 V 6
FB voltage (absolute maximum) FB -0.3 6.5 V 6
SW Voltage DC (absolute maximum) SW -0.5 6.5 V DC 6
SW Voltage pulse (absolute maximum) SW -0.5 8 V Pulse < 10ns 6
ESD Human Body Model 3 kV Tested per JESD22-A114F 6
ESD Machine Model 250 V Tested per JESD22-A115-A 6
Thermal Resistance JA, 6 Ld SOT-23 θJA 146 °C/W Typical; component mounted on high effective thermal conductivity test board in free air 6
Junction Temperature Range TJ -20 125 °C 6
Operating Temperature Range (ambient) TA -20 85 °C 6
Storage Temperature Range TSTG -65 150 °C 6
VIN recommended operating range VIN 0.8 V Maximum printed as VOUT - 200mV (formula, no numeric max) 6
Maximum DC Current from Input 750 mA 6

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ISL9111EHADJZ-T7A
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: isl9111ehadjz-t7a-etched.step / isl9111ehadjz-t7a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl9111ehadjz-t7a.step / isl9111ehadjz-t7a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (15 pp, sha256 c27134c4ffe9d262, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF