3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownX9511WSIZ
RENESAS · Digital Potentiometers · SOIC-8
X9511WSIZ from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VH/RH | passive | High terminal of the resistor array, with voltage limited to -5V minimum and +5V maximum. |
| 2 | PU | input | Debounced increment input with an on-chip pull-up holding it HIGH; a LOW after debounce moves the wiper to the next higher tap. |
| 3 | PD | input | Debounced decrement input with an on-chip pull-up holding it HIGH; a LOW after debounce moves the wiper to the next lower tap. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | VW/RW | passive | Wiper terminal that connects to the selected tap of the resistor array, with wiper current limited to 1mA max. |
| 6 | VL/RL | passive | Low terminal of the resistor array, with voltage limited to -5V minimum and +5V maximum. |
| 7 | ASE | input | AUTOSTORE enable input: VIL enables automatic store to EEPROM on VCC power-down, while VIH disables it and a LOW-to-HIGH transition starts a manual store. |
| 8 | VCC | power_in | Supply voltage, specified at 5V ±10% for the X9511. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| End-to-end resistance tolerance | RTOTAL | -20 | 20 | % | End-to-end resistance tolerance | 5 | |
| Active supply current | ICC | 1 | 3 | mA | PU or PD held at VIL the other at VIH | 6 | |
| Standby supply current | ISB | 100 | 500 | µA | PU = PD = VIH | 6 | |
| PU, PD, ASE input leakage current | ILI | 10 | µA | VIN = VSS to VCC | 6 | ||
| PU, PD, ASE input HIGH voltage | VIH | 2 | V | 6 | |||
| PU, PD, ASE input LOW voltage | VIL | 0.8 | V | 6 | |||
| Wiper resistance | RW | 40 | 100 | Ω | Wiper Current VCC/RTOT | 6 | |
| VH terminal voltage | VVH | -5 | 5 | V | 6 | ||
| VL terminal voltage | VVL | -5 | 5 | V | 6 | ||
| ASE, PU, PD input capacitance | CIN | 10 | pF | VCC = 5V, VIN = 0V, TA = +25°C, f = 1MHz | 6 | ||
| Time between two separate push button events | tGAP | 50 | µs | 6 | |||
| Debounce time | tDB | 30 | 40 | ms | 6 | ||
| Wiper change on slow mode | tS SLOW | 100 | 250 | 375 | ms | After debounce to wiper change on a slow mode | 6 |
| Wiper change on fast mode | tS FAST | 25 | 50 | 90 | ms | Wiper change on a fast mode | 6 |
| Power-up to wiper stable | tPU | 500 | µs | 6 | |||
| VCC power-up rate | tR VCC | 0.2 | 50 | V/ms | 6 | ||
| AUTOSTORE cycle time | tASTO | 2 | ms | 6 | |||
| AUTOSTORE threshold voltage | VASTH | 4 | V | 6 | |||
| AUTOSTORE cycle end voltage | VASEND | 3.5 | V | 6 | |||
| Operating temperature, industrial | TA | -40 | 85 | °C | Industrial | 6 | |
| Absolute linearity | 1 | MI | Absolute linearity(1) | 5 | |||
| Relative linearity | 0.2 | MI | Relative linearity(3) | 5 | |||
| Nominal end-to-end resistance (X9511W) | RTOTAL | 10 | kΩ | X9511W = 10k | 1 | ||
| Temperature coefficient, X9511W | 300 | ppm/°C | -40C to +85C | 5 | |||
| Ratiometric temperature coefficient | 20 | ppm | Ratiometric temperature coefficient | 5 | |||
| Power rating at +25C, X9511W | 10 | mW | Power rating at +25C | 5 | |||
| Rated voltage V = /VH - VL/, X9511W | V | 10 | V | V = /VH - VL/ X9511W | 5 | ||
| Temperature under bias | -65 | 135 | °C | Temperature under bias | 5 | ||
| Storage temperature | -65 | 150 | °C | Storage temperature | 5 | ||
| Voltage on PU, PD, and VCC | -1 | 7 | V | with respect to VSS | 5 | ||
| Voltage on VH and VL | -8 | 8 | V | referenced to VSS | 5 | ||
| Wiper current | 1 | mA | Wiper current 1mA | 5 | |||
| Lead temperature | 300 | °C | Soldering 10 seconds | 5 | |||
| ESD Human Body Model | 2.5 | kV | Per MIL-STD-883 Method 3015.7 | 5 | |||
| ESD Machine Model | 250 | V | Per EIAJ ED-4701 Method C-111 | 5 |
CAD (KiCad official)
- Symbol:
X9511WSIZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
x9511wsiz-etched.step/x9511wsiz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);x9511wsiz.step/x9511wsiz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (9 pp, sha256
6e04d3833c99a509, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).