main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers x9511wsiz: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
x9511wsiz-etched.glb Publish 0.1.0 · Ray
x9511wsiz-etched.step x9511wsiz: factory component page (tier=mfr) · Ray
x9511wsiz-hero.glb x9511wsiz: hero GLB from the etched model (keeps the MPN mark) · Ray
x9511wsiz-hero.overlay.json Publish 0.1.0 · Ray
x9511wsiz.glb Publish 0.1.0 · Ray
x9511wsiz.kicad_mod Publish 0.1.0 · Ray
x9511wsiz.kicad_sym Publish 0.1.0 · Ray
x9511wsiz.lbr Publish 0.1.0 · Ray
x9511wsiz.step Publish 0.1.0 · Ray

X9511WSIZ

RENESAS · Digital Potentiometers · SOIC-8

X9511WSIZ from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VH/RH passive High terminal of the resistor array, with voltage limited to -5V minimum and +5V maximum.
2 PU input Debounced increment input with an on-chip pull-up holding it HIGH; a LOW after debounce moves the wiper to the next higher tap.
3 PD input Debounced decrement input with an on-chip pull-up holding it HIGH; a LOW after debounce moves the wiper to the next lower tap.
4 VSS power_in Ground reference for the device.
5 VW/RW passive Wiper terminal that connects to the selected tap of the resistor array, with wiper current limited to 1mA max.
6 VL/RL passive Low terminal of the resistor array, with voltage limited to -5V minimum and +5V maximum.
7 ASE input AUTOSTORE enable input: VIL enables automatic store to EEPROM on VCC power-down, while VIH disables it and a LOW-to-HIGH transition starts a manual store.
8 VCC power_in Supply voltage, specified at 5V ±10% for the X9511.

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-8
Category Data Converters
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
End-to-end resistance tolerance RTOTAL -20 20 % End-to-end resistance tolerance 5
Active supply current ICC 1 3 mA PU or PD held at VIL the other at VIH 6
Standby supply current ISB 100 500 µA PU = PD = VIH 6
PU, PD, ASE input leakage current ILI 10 µA VIN = VSS to VCC 6
PU, PD, ASE input HIGH voltage VIH 2 V 6
PU, PD, ASE input LOW voltage VIL 0.8 V 6
Wiper resistance RW 40 100 Ω Wiper Current VCC/RTOT 6
VH terminal voltage VVH -5 5 V 6
VL terminal voltage VVL -5 5 V 6
ASE, PU, PD input capacitance CIN 10 pF VCC = 5V, VIN = 0V, TA = +25°C, f = 1MHz 6
Time between two separate push button events tGAP 50 µs 6
Debounce time tDB 30 40 ms 6
Wiper change on slow mode tS SLOW 100 250 375 ms After debounce to wiper change on a slow mode 6
Wiper change on fast mode tS FAST 25 50 90 ms Wiper change on a fast mode 6
Power-up to wiper stable tPU 500 µs 6
VCC power-up rate tR VCC 0.2 50 V/ms 6
AUTOSTORE cycle time tASTO 2 ms 6
AUTOSTORE threshold voltage VASTH 4 V 6
AUTOSTORE cycle end voltage VASEND 3.5 V 6
Operating temperature, industrial TA -40 85 °C Industrial 6
Absolute linearity 1 MI Absolute linearity(1) 5
Relative linearity 0.2 MI Relative linearity(3) 5
Nominal end-to-end resistance (X9511W) RTOTAL 10 kΩ X9511W = 10k 1
Temperature coefficient, X9511W 300 ppm/°C -40C to +85C 5
Ratiometric temperature coefficient 20 ppm Ratiometric temperature coefficient 5
Power rating at +25C, X9511W 10 mW Power rating at +25C 5
Rated voltage V = /VH - VL/, X9511W V 10 V V = /VH - VL/ X9511W 5
Temperature under bias -65 135 °C Temperature under bias 5
Storage temperature -65 150 °C Storage temperature 5
Voltage on PU, PD, and VCC -1 7 V with respect to VSS 5
Voltage on VH and VL -8 8 V referenced to VSS 5
Wiper current 1 mA Wiper current 1mA 5
Lead temperature 300 °C Soldering 10 seconds 5
ESD Human Body Model 2.5 kV Per MIL-STD-883 Method 3015.7 5
ESD Machine Model 250 V Per EIAJ ED-4701 Method C-111 5

CAD (KiCad official)

  • Symbol: X9511WSIZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: x9511wsiz-etched.step / x9511wsiz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); x9511wsiz.step / x9511wsiz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (9 pp, sha256 6e04d3833c99a509, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF