Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD5362BSTZ

Analog Devices · Pre-ordered Chips · LQFP-52(10x10)

AD5362BSTZ from Analog Devices, in a LQFP-52(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LDAC input Active-low Load DAC logic input; taking it low updates all DAC outputs simultaneously (see BUSY and LDAC Functions section).
2 CLR input Asynchronous clear input, level sensitive and active low, which switches the DAC outputs to SIGGNDx.
3 RESET input Digital reset input.
4 BIN/2SCOMP input Data format input: connecting to DGND selects offset binary and a logic 1 selects twos complement; this input has a weak pull-down.
5 BUSY bidirectional Digital input/open-drain output; BUSY is open drain when it is an output (see BUSY and LDAC Functions section).
6 GPIO bidirectional Digital I/O pin that can be configured as input or output and read back or programmed high or low via the serial interface; when an input it has a weak pull-down.
7 MON_OUT output Analog multiplexer output; any DAC output, the MON_IN0 input, or the MON_IN1 input can be routed to this output for monitoring.
8 MON_IN0 input Analog multiplexer input that can be routed to MON_OUT.
9 NC unconnected No connect.
10 NC unconnected No connect.
11 VDD power_in Positive analog power supply, 9 V to 16.5 V for specified performance; decouple with 0.1 µF ceramic and 10 µF capacitors.
12 VSS power_in Negative analog power supply, −16.5 V to −8 V for specified performance; decouple with 0.1 µF ceramic and 10 µF capacitors.
13 VREF1 input Reference input for DAC 4 to DAC 7, referred to AGND.
14 NC unconnected No connect.
15 VOUT4 output Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω.
16 VOUT5 output Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω.
17 VOUT6 output Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω.
18 VOUT7 output Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω.
19 SIGGND1 power_in Reference ground for DAC 4 to DAC 7; VOUT4 to VOUT7 are referenced to this voltage.
20 NC unconnected No connect.
21 NC unconnected No connect.
22 NC unconnected No connect.
23 NC unconnected No connect.
24 NC unconnected No connect.
25 NC unconnected No connect.
26 NC unconnected No connect.
27 NC unconnected No connect.
28 VDD power_in Positive analog power supply, 9 V to 16.5 V for specified performance; decouple with 0.1 µF ceramic and 10 µF capacitors.
29 VSS power_in Negative analog power supply, −16.5 V to −8 V for specified performance; decouple with 0.1 µF ceramic and 10 µF capacitors.
30 NC unconnected No connect.
31 VREF0 input Reference input for DAC 0 to DAC 3, referred to AGND.
32 MON_IN1 input Analog multiplexer input that can be routed to MON_OUT.
33 TEMP_OUT output Provides an output voltage proportional to chip temperature, typically 1.46 V at 25°C with an output variation of 4.4 mV/°C.
34 VOUT0 output Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω.
35 VOUT1 output Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω.
36 VOUT2 output Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω.
37 VOUT3 output Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω.
38 SIGGND0 power_in Reference ground for DAC 0 to DAC 3; VOUT0 to VOUT3 are referenced to this voltage.
39 NC unconnected No connect.
40 NC unconnected No connect.
41 NC unconnected No connect.
42 NC unconnected No connect.
43 DGND power_in Ground for all digital circuitry; both DGND pins should be connected to the DGND plane.
44 DVCC power_in Logic power supply, 2.5 V to 5.5 V; decouple with 0.1 µF ceramic and 10 µF capacitors.
45 SYNC input Active-low frame synchronization input for the SPI serial interface.
46 SCLK input Serial clock input for the SPI serial interface.
47 SDI input Serial data input for the SPI serial interface.
48 PEC output Packet error check output, an open-drain output with a 50 kΩ pull-up that goes low if the packet error check fails.
49 SDO output Serial data output for the SPI serial interface.
50 DVCC power_in Logic power supply, 2.5 V to 5.5 V; decouple with 0.1 µF ceramic and 10 µF capacitors.
51 DGND power_in Ground for all digital circuitry; both DGND pins should be connected to the DGND plane.
52 AGND power_in Ground for all analog circuitry; should be connected to the AGND plane.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package LQFP-52(10x10)
Category Interface ICs
Pins 52

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Integral Nonlinearity (INL), AD5362 INL -4 4 LSB AD5362 4
Differential Nonlinearity (DNL) DNL -1 1 LSB Guaranteed monotonic by design over temperature 4
Zero-Scale Error -15 15 mV Before calibration 4
Full-Scale Error -20 20 mV Before calibration 4
Span Error of Offset DAC -75 75 mV See the Offset DACs section for details 4
DC Crosstalk 180 μV Typically 20 μV; measured channel at midscale, full-scale change on any other channel 4
VREFx Input Current -10 10 μA Per input; typically ±30 nA 4
VREFx Range 2 5 V ±2% for specified operation 4
SIGGNDx DC Input Impedance 50 kΩ Typically 55 kΩ 4
SIGGNDx Input Range -0.5 0.5 V 4
SIGGNDx Gain 0.995 1.005 4
Nominal Output Voltage Range -10 10 V 4
Short-Circuit Current 15 mA VOUTx to DVCC, VDD, or VSS 4
Load Current -1 1 mA 4
Capacitive Load 2200 pF 4
DC Output Impedance 0.5 Ω 4
MON_OUT Continuous Current Limit 2 mA 4
Input High Voltage 1.7 V DVCC = 2.5 V to 3.6 V 4
Input High Voltage 2 V DVCC = 3.6 V to 5.5 V 4
Input Low Voltage 0.8 V DVCC = 2.5 V to 5.5 V 4
Input Current (RESET, SYNC, SDI, SCLK pins) -1 1 μA RESET, SYNC, SDI, and SCLK pins 4
Input Current (CLR, BIN/2SCOMP, GPIO pins) -20 20 μA CLR, BIN/2SCOMP, and GPIO pins 4
Input Capacitance 10 pF 4
Output Low Voltage 0.5 V Sinking 200 μA 5
High Impedance Leakage Current (SDO) -5 5 μA SDO only 5
Output Load Current (TEMP_OUT) 200 μA Current source only 5
DVCC 2.5 5.5 V 5
VDD 8 16.5 V 5
VSS -16.5 -4.5 V 5
DICC 2 mA DVCC = 5.5 V, VIH = DVCC, VIL = GND 5
IDD IDD 8.5 mA Outputs = 0 V and unloaded 5
ISS ISS 8.5 mA Outputs = 0 V and unloaded 5
Power Dissipation Unloaded (P) P 209 mW VSS = −12 V, VDD = 12 V, DVCC = 2.5 V 5
Output Voltage Settling Time 30 μs DAC latch contents alternately loaded with all 0s and all 1s 6
Glitch Impulse Peak Amplitude 10 mV 6
VDD to AGND -0.3 17 V 10
VSS to AGND -17 0.3 V 10
DVCC to DGND -0.3 7 V 10
Digital Inputs to DGND (upper limit printed as DVCC + 0.3 V) -0.3 V 10
Digital Outputs to DGND (upper limit printed as DVCC + 0.3 V) -0.3 V 10
VREF0, VREF1 to AGND -0.3 5.5 V 10
SIGGND0, SIGGND1 to AGND -1 1 V 10
AGND to DGND -0.3 0.3 V 10
Operating Temperature Range (TA), Industrial (J Version) TA -40 85 °C 10
Storage Temperature Range -65 150 °C 10
Operating Junction Temperature (TJ max) TJ 130 °C 10
Reflow Soldering Peak Temperature 230 °C 10
Time at Peak Temperature (reflow) 10 40 sec 10
θJA Thermal Impedance, 52-Lead LQFP θJA 38 °C/W 10
SCLK cycle time t1 20 ns 7
SYNC rising edge to BUSY falling edge t9 42 ns 7
BUSY pulse width low (single-channel update) t10 1 1.5 μs single-channel update; see Table 9 7
Single-channel update cycle time t11 600 ns 7
BUSY rising edge to DAC output response time t14 3 μs 7
LDAC falling edge to DAC output response time t16 3 μs 7
CLR/RESET pulse activation time t18 140 ns 7
RESET time indicated by BUSY low t20 400 μs 7
SYNC rising edge to LDAC falling edge t12 20 ns 7
LDAC pulse width low t13 10 ns 7
RESET rising edge to BUSY falling edge t23 80 ns 7

CAD (KiCad official)

  • Symbol: AD5362BSTZ
  • Footprint: Package_QFP:LQFP-52_10x10mm_P0.65mm
  • 3D model: LQFP-52(10x10) (KiCad packages3D, STEP)
  • 3D model files: ad5362bstz-etched.step / ad5362bstz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad5362bstz.step / ad5362bstz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (28 pp, sha256 4ea1d31c85d62a44, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF