component
AD5362BSTZ
Public Made by Adomby adom
Analog Devices Pre-ordered Chips, LQFP-52(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
AD5362BSTZ
Analog Devices · Pre-ordered Chips · LQFP-52(10x10)
AD5362BSTZ from Analog Devices, in a LQFP-52(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LDAC | input | Active-low Load DAC logic input; taking it low updates all DAC outputs simultaneously (see BUSY and LDAC Functions section). |
| 2 | CLR | input | Asynchronous clear input, level sensitive and active low, which switches the DAC outputs to SIGGNDx. |
| 3 | RESET | input | Digital reset input. |
| 4 | BIN/2SCOMP | input | Data format input: connecting to DGND selects offset binary and a logic 1 selects twos complement; this input has a weak pull-down. |
| 5 | BUSY | bidirectional | Digital input/open-drain output; BUSY is open drain when it is an output (see BUSY and LDAC Functions section). |
| 6 | GPIO | bidirectional | Digital I/O pin that can be configured as input or output and read back or programmed high or low via the serial interface; when an input it has a weak pull-down. |
| 7 | MON_OUT | output | Analog multiplexer output; any DAC output, the MON_IN0 input, or the MON_IN1 input can be routed to this output for monitoring. |
| 8 | MON_IN0 | input | Analog multiplexer input that can be routed to MON_OUT. |
| 9 | NC | unconnected | No connect. |
| 10 | NC | unconnected | No connect. |
| 11 | VDD | power_in | Positive analog power supply, 9 V to 16.5 V for specified performance; decouple with 0.1 µF ceramic and 10 µF capacitors. |
| 12 | VSS | power_in | Negative analog power supply, −16.5 V to −8 V for specified performance; decouple with 0.1 µF ceramic and 10 µF capacitors. |
| 13 | VREF1 | input | Reference input for DAC 4 to DAC 7, referred to AGND. |
| 14 | NC | unconnected | No connect. |
| 15 | VOUT4 | output | Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω. |
| 16 | VOUT5 | output | Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω. |
| 17 | VOUT6 | output | Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω. |
| 18 | VOUT7 | output | Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω. |
| 19 | SIGGND1 | power_in | Reference ground for DAC 4 to DAC 7; VOUT4 to VOUT7 are referenced to this voltage. |
| 20 | NC | unconnected | No connect. |
| 21 | NC | unconnected | No connect. |
| 22 | NC | unconnected | No connect. |
| 23 | NC | unconnected | No connect. |
| 24 | NC | unconnected | No connect. |
| 25 | NC | unconnected | No connect. |
| 26 | NC | unconnected | No connect. |
| 27 | NC | unconnected | No connect. |
| 28 | VDD | power_in | Positive analog power supply, 9 V to 16.5 V for specified performance; decouple with 0.1 µF ceramic and 10 µF capacitors. |
| 29 | VSS | power_in | Negative analog power supply, −16.5 V to −8 V for specified performance; decouple with 0.1 µF ceramic and 10 µF capacitors. |
| 30 | NC | unconnected | No connect. |
| 31 | VREF0 | input | Reference input for DAC 0 to DAC 3, referred to AGND. |
| 32 | MON_IN1 | input | Analog multiplexer input that can be routed to MON_OUT. |
| 33 | TEMP_OUT | output | Provides an output voltage proportional to chip temperature, typically 1.46 V at 25°C with an output variation of 4.4 mV/°C. |
| 34 | VOUT0 | output | Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω. |
| 35 | VOUT1 | output | Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω. |
| 36 | VOUT2 | output | Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω. |
| 37 | VOUT3 | output | Buffered analog DAC output that drives a 10 kΩ load to ground with typical output impedance of 0.5 Ω. |
| 38 | SIGGND0 | power_in | Reference ground for DAC 0 to DAC 3; VOUT0 to VOUT3 are referenced to this voltage. |
| 39 | NC | unconnected | No connect. |
| 40 | NC | unconnected | No connect. |
| 41 | NC | unconnected | No connect. |
| 42 | NC | unconnected | No connect. |
| 43 | DGND | power_in | Ground for all digital circuitry; both DGND pins should be connected to the DGND plane. |
| 44 | DVCC | power_in | Logic power supply, 2.5 V to 5.5 V; decouple with 0.1 µF ceramic and 10 µF capacitors. |
| 45 | SYNC | input | Active-low frame synchronization input for the SPI serial interface. |
| 46 | SCLK | input | Serial clock input for the SPI serial interface. |
| 47 | SDI | input | Serial data input for the SPI serial interface. |
| 48 | PEC | output | Packet error check output, an open-drain output with a 50 kΩ pull-up that goes low if the packet error check fails. |
| 49 | SDO | output | Serial data output for the SPI serial interface. |
| 50 | DVCC | power_in | Logic power supply, 2.5 V to 5.5 V; decouple with 0.1 µF ceramic and 10 µF capacitors. |
| 51 | DGND | power_in | Ground for all digital circuitry; both DGND pins should be connected to the DGND plane. |
| 52 | AGND | power_in | Ground for all analog circuitry; should be connected to the AGND plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LQFP-52(10x10) |
| Category | Interface ICs |
| Pins | 52 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Integral Nonlinearity (INL), AD5362 | INL | -4 | 4 | LSB | AD5362 | 4 | |
| Differential Nonlinearity (DNL) | DNL | -1 | 1 | LSB | Guaranteed monotonic by design over temperature | 4 | |
| Zero-Scale Error | -15 | 15 | mV | Before calibration | 4 | ||
| Full-Scale Error | -20 | 20 | mV | Before calibration | 4 | ||
| Span Error of Offset DAC | -75 | 75 | mV | See the Offset DACs section for details | 4 | ||
| DC Crosstalk | 180 | μV | Typically 20 μV; measured channel at midscale, full-scale change on any other channel | 4 | |||
| VREFx Input Current | -10 | 10 | μA | Per input; typically ±30 nA | 4 | ||
| VREFx Range | 2 | 5 | V | ±2% for specified operation | 4 | ||
| SIGGNDx DC Input Impedance | 50 | kΩ | Typically 55 kΩ | 4 | |||
| SIGGNDx Input Range | -0.5 | 0.5 | V | 4 | |||
| SIGGNDx Gain | 0.995 | 1.005 | 4 | ||||
| Nominal Output Voltage Range | -10 | 10 | V | 4 | |||
| Short-Circuit Current | 15 | mA | VOUTx to DVCC, VDD, or VSS | 4 | |||
| Load Current | -1 | 1 | mA | 4 | |||
| Capacitive Load | 2200 | pF | 4 | ||||
| DC Output Impedance | 0.5 | Ω | 4 | ||||
| MON_OUT Continuous Current Limit | 2 | mA | 4 | ||||
| Input High Voltage | 1.7 | V | DVCC = 2.5 V to 3.6 V | 4 | |||
| Input High Voltage | 2 | V | DVCC = 3.6 V to 5.5 V | 4 | |||
| Input Low Voltage | 0.8 | V | DVCC = 2.5 V to 5.5 V | 4 | |||
| Input Current (RESET, SYNC, SDI, SCLK pins) | -1 | 1 | μA | RESET, SYNC, SDI, and SCLK pins | 4 | ||
| Input Current (CLR, BIN/2SCOMP, GPIO pins) | -20 | 20 | μA | CLR, BIN/2SCOMP, and GPIO pins | 4 | ||
| Input Capacitance | 10 | pF | 4 | ||||
| Output Low Voltage | 0.5 | V | Sinking 200 μA | 5 | |||
| High Impedance Leakage Current (SDO) | -5 | 5 | μA | SDO only | 5 | ||
| Output Load Current (TEMP_OUT) | 200 | μA | Current source only | 5 | |||
| DVCC | 2.5 | 5.5 | V | 5 | |||
| VDD | 8 | 16.5 | V | 5 | |||
| VSS | -16.5 | -4.5 | V | 5 | |||
| DICC | 2 | mA | DVCC = 5.5 V, VIH = DVCC, VIL = GND | 5 | |||
| IDD | IDD | 8.5 | mA | Outputs = 0 V and unloaded | 5 | ||
| ISS | ISS | 8.5 | mA | Outputs = 0 V and unloaded | 5 | ||
| Power Dissipation Unloaded (P) | P | 209 | mW | VSS = −12 V, VDD = 12 V, DVCC = 2.5 V | 5 | ||
| Output Voltage Settling Time | 30 | μs | DAC latch contents alternately loaded with all 0s and all 1s | 6 | |||
| Glitch Impulse Peak Amplitude | 10 | mV | 6 | ||||
| VDD to AGND | -0.3 | 17 | V | 10 | |||
| VSS to AGND | -17 | 0.3 | V | 10 | |||
| DVCC to DGND | -0.3 | 7 | V | 10 | |||
| Digital Inputs to DGND (upper limit printed as DVCC + 0.3 V) | -0.3 | V | 10 | ||||
| Digital Outputs to DGND (upper limit printed as DVCC + 0.3 V) | -0.3 | V | 10 | ||||
| VREF0, VREF1 to AGND | -0.3 | 5.5 | V | 10 | |||
| SIGGND0, SIGGND1 to AGND | -1 | 1 | V | 10 | |||
| AGND to DGND | -0.3 | 0.3 | V | 10 | |||
| Operating Temperature Range (TA), Industrial (J Version) | TA | -40 | 85 | °C | 10 | ||
| Storage Temperature Range | -65 | 150 | °C | 10 | |||
| Operating Junction Temperature (TJ max) | TJ | 130 | °C | 10 | |||
| Reflow Soldering Peak Temperature | 230 | °C | 10 | ||||
| Time at Peak Temperature (reflow) | 10 | 40 | sec | 10 | |||
| θJA Thermal Impedance, 52-Lead LQFP | θJA | 38 | °C/W | 10 | |||
| SCLK cycle time | t1 | 20 | ns | 7 | |||
| SYNC rising edge to BUSY falling edge | t9 | 42 | ns | 7 | |||
| BUSY pulse width low (single-channel update) | t10 | 1 | 1.5 | μs | single-channel update; see Table 9 | 7 | |
| Single-channel update cycle time | t11 | 600 | ns | 7 | |||
| BUSY rising edge to DAC output response time | t14 | 3 | μs | 7 | |||
| LDAC falling edge to DAC output response time | t16 | 3 | μs | 7 | |||
| CLR/RESET pulse activation time | t18 | 140 | ns | 7 | |||
| RESET time indicated by BUSY low | t20 | 400 | μs | 7 | |||
| SYNC rising edge to LDAC falling edge | t12 | 20 | ns | 7 | |||
| LDAC pulse width low | t13 | 10 | ns | 7 | |||
| RESET rising edge to BUSY falling edge | t23 | 80 | ns | 7 |
CAD (KiCad official)
- Symbol:
AD5362BSTZ - Footprint:
Package_QFP:LQFP-52_10x10mm_P0.65mm - 3D model: LQFP-52(10x10) (KiCad packages3D, STEP)
- 3D model files:
ad5362bstz-etched.step/ad5362bstz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad5362bstz.step/ad5362bstz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (28 pp, sha256
4ea1d31c85d62a44, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).