3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNUC131LD2AE
Nuvoton Tech · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
NUC131LD2AE from Nuvoton Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB.12 | bidirectional | General purpose digital I/O pin, with alternate functions CLKO (frequency divider clock output) and BPWM1_CH3 (BPWM1 CH3 output/capture input). |
| 2 | PF.5 | bidirectional | General purpose digital I/O pin, with alternate functions I2C0_SCL (I2C0 clock) and PWM1_CH5 (PWM1 CH5 output/capture input). |
| 3 | PF.4 | bidirectional | General purpose digital I/O pin, with alternate functions I2C0_SDA (I2C0 data input/output) and PWM1_CH4 (PWM1 CH4 output/capture input). |
| 4 | PA.11 | bidirectional | General purpose digital I/O pin, with alternate functions I2C1_SCL (I2C1 clock) and PWM1_CH3 (PWM1 CH3 output/capture input). |
| 5 | PA.10 | bidirectional | General purpose digital I/O pin, with alternate functions I2C1_SDA (I2C1 data input/output) and PWM1_CH2 (PWM1 CH2 output/capture input). |
| 6 | PA.9 | bidirectional | General purpose digital I/O pin, with alternate functions I2C0_SCL (I2C0 clock) and UART1_nCTS (Clear to Send input for UART1). |
| 7 | PA.8 | bidirectional | General purpose digital I/O pin, with alternate functions I2C0_SDA (I2C0 data input/output) and UART1_nRTS (Request to Send output for UART1). |
| 8 | PB.4 | bidirectional | General purpose digital I/O pin, with alternate function UART1_RXD (data receiver input for UART1). |
| 9 | PB.5 | bidirectional | General purpose digital I/O pin, with alternate function UART1_TXD (data transmitter output for UART1). |
| 10 | LDO_CAP | power_out | LDO output pin; the datasheet gives no capacitor or voltage limit for this pin in the excerpt provided. |
| 11 | VDD | power_in | Power supply for I/O ports and LDO source for internal PLL and digital circuit. |
| 12 | VSS | power_in | Ground pin for digital circuit. |
| 13 | PB.0 | bidirectional | General purpose digital I/O pin, with alternate function UART0_RXD (data receiver input for UART0). |
| 14 | PB.1 | bidirectional | General purpose digital I/O pin, with alternate function UART0_TXD (data transmitter output for UART0). |
| 15 | PB.2 | bidirectional | General purpose digital I/O pin, with alternate functions UART0_nRTS (output), TM2_EXT (Timer2 external capture input), TM2 (Timer2 toggle output) and PWM1_BRAKE1 (PWM1 brake input). |
| 16 | PB.3 | bidirectional | General purpose digital I/O pin, with alternate functions UART0_nCTS (input), TM3_EXT (Timer3 external capture input), TM3 (Timer3 toggle output) and PWM1_BRAKE0 (PWM1 brake input). |
| 17 | PD.6 | bidirectional | General purpose digital I/O pin, with alternate functions CAN0_RXD (data receiver input for CAN0) and BPWM1_CH1 (BPWM1 CH1 output/capture input). |
| 18 | PD.7 | bidirectional | General purpose digital I/O pin, with alternate functions CAN0_TXD (data transmitter output for CAN0) and BPWM1_CH0 (BPWM1 CH0 output/capture input). |
| 19 | PD.14 | bidirectional | General purpose digital I/O pin, with alternate functions UART2_RXD (data receiver input for UART2) and BPWM0_CH5 (BPWM0 CH5 output/capture input). |
| 20 | PD.15 | bidirectional | General purpose digital I/O pin, with alternate functions UART2_TXD (data transmitter output for UART2) and BPWM0_CH4 (BPWM0 CH4 input/capture input). |
| 21 | PC.3 | bidirectional | General purpose digital I/O pin, with alternate functions SPI0_MOSI0 (SPI0 Master Out, Slave In) and BPWM0_CH3 (BPWM0 CH3 input/capture input). |
| 22 | PC.2 | bidirectional | General purpose digital I/O pin, with alternate functions SPI0_MISO0 (SPI0 Master In, Slave Out) and BPWM0_CH2 (BPWM0 CH2 input/capture input). |
| 23 | PC.1 | bidirectional | General purpose digital I/O pin, with alternate functions SPI0_CLK (SPI0 serial clock) and BPWM0_CH1 (BPWM0 CH1 input/capture input). |
| 24 | PC.0 | bidirectional | General purpose digital I/O pin, with alternate functions SPI0_SS0 (SPI0 slave select) and BPWM0_CH0 (BPWM0 CH0 input/capture input). |
| 25 | PA.15 | bidirectional | General purpose digital I/O pin, with alternate function PWM0_CH3 (PWM0 CH3 output/capture input). |
| 26 | PA.14 | bidirectional | General purpose digital I/O pin, with alternate function PWM0_CH2 (PWM0 CH2 output/capture input). |
| 27 | PA.13 | bidirectional | General purpose digital I/O pin, with alternate functions PWM0_CH1 (PWM0 CH1 output/capture input) and UART5_TXD (data transmitter output for UART5). |
| 28 | PA.12 | bidirectional | General purpose digital I/O pin, with alternate functions PWM0_CH0 (PWM0 CH0 output/capture input) and UART5_RXD (data receiver input for UART5). |
| 29 | PF.7 | bidirectional | General purpose digital I/O pin, with alternate function ICE_DAT (serial wired debugger data); the datasheet recommends a 100 kΩ pull-up resistor on this pin. |
| 30 | PF.6 | bidirectional | General purpose digital I/O pin, with alternate function ICE_CLK (serial wired debugger clock input); the datasheet recommends a 100 kΩ pull-up resistor on this pin. |
| 31 | AVSS | power_in | Ground pin for analog circuit. |
| 32 | PA.0 | bidirectional | General purpose digital I/O pin, with alternate functions ADC_CH0 (ADC analog input channel 0), PWM0_CH4, I2C1_SCL (I2C1 clock), and UART5_TXD (data transmitter output for UART5). |
| 33 | PA.1 | bidirectional | General purpose digital I/O pin, with alternate functions ADC_CH1 (ADC analog input channel 1), PWM0_CH5, I2C1_SDA (I2C1 data input/output), and UART5_RXD (data receiver input for UART5). |
| 34 | PA.2 | bidirectional | General purpose digital I/O pin, with alternate functions ADC_CH2 (ADC analog input channel 2), PWM1_CH0 (PWM1 CH0 output/capture input), and UART3_TXD (data transmitter output for UART3). |
| 35 | PA.3 | bidirectional | General purpose digital I/O pin, with alternate functions ADC_CH3 (ADC analog input channel 3), PWM1_CH1 (PWM1 CH1 output/capture input), and UART3_RXD (data receiver input for UART3). |
| 36 | PA.4 | bidirectional | General purpose digital I/O pin, with alternate function ADC_CH4 (ADC analog input channel 4). |
| 37 | PA.5 | bidirectional | General purpose digital I/O pin, with alternate functions ADC_CH5 (ADC analog input channel 5) and UART3_RXD (data receiver input for UART3). |
| 38 | PA.6 | bidirectional | General purpose digital I/O pin, with alternate functions ADC_CH6 (ADC analog input channel 6) and UART3_TXD (data transmitter output for UART3). |
| 39 | PA.7 | bidirectional | General purpose digital I/O pin, with alternate functions ADC_CH7 (ADC analog input channel 7) and VREF (voltage reference input for ADC). |
| 40 | AVDD | power_in | Power supply for internal analog circuit. |
| 41 | PC.7 | bidirectional | General purpose digital I/O pin, with alternate functions UART4_RXD (data receiver input for UART4), I2C0_SCL (I2C0 clock), and PWM0_BRAKE1 (PWM0 brake input). |
| 42 | PC.6 | bidirectional | General purpose digital I/O pin, with alternate functions UART4_TXD (data transmitter output for UART4), I2C0_SDA (I2C0 data input/output), and PWM0_BRAKE0 (PWM0 brake input). |
| 43 | PB.15 | bidirectional | General purpose digital I/O pin, with alternate functions INT1 (external interrupt 1 input), TM0_EXT (Timer0 external capture input), TM0 (Timer0 toggle output), and BPWM1_CH5 (BPWM1 CH5 output/capture input). |
| 44 | PF.0 | bidirectional | General purpose digital I/O pin, with alternate function XT1_OUT (external 4~24 MHz high speed crystal output). |
| 45 | PF.1 | bidirectional | General purpose digital I/O pin, with alternate function XT1_IN (external 4~24 MHz high speed crystal input). |
| 46 | nRESET | input | External reset input, active LOW, with an internal pull-up that sets the device to its initial state when pulled low; the datasheet recommends a 10 kΩ pull-up resistor and 10 µF capacitor on this pin. |
| 47 | PF.8 | bidirectional | General purpose digital I/O pin, with alternate functions CLKO (frequency divider clock output) and BPWM1_CH4 (BPWM1 CH4 output/capture input). |
| 48 | PB.8 | bidirectional | General purpose digital I/O pin, with alternate functions STADC (ADC external trigger input), TM0 (Timer0 event counter input/toggle output), CLKO (frequency divider clock output), and BPWM1_CH2 (BPWM1 CH2 output/capture input). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nuvoton Tech |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Power Supply | VDDVSS | -0.3 | 6.1 | V | 56 | ||
| Variations between different VDD power pins | ΔVDD | 50 | mV | 56 | |||
| Allowed voltage difference for VDD and AVDD | /VDD -AVDD/ | 50 | mV | 56 | |||
| Variations between different VSS ground pins | ΔVSS | 50 | mV | 56 | |||
| Allowed voltage difference for VSS and AVSS | /VSS -AVSS/ | 50 | mV | 56 | |||
| Oscillator Frequency | 1/tCLCL | 4 | 24 | MHz | 56 | ||
| Operating Temperature | TA | -40 | 105 | C | 56 | ||
| Junction Temperature | Tj | -40 | 125 | C | 56 | ||
| Storage Temperature | TST | -55 | 150 | C | 56 | ||
| Maximum Current into VDD | ΣIDD | 120 | mA | 56 | |||
| Maximum Current out of VSS | ΣISS | 120 | mA | 56 | |||
| Maximum Current sunk by a I/O pin | 35 | mA | 56 | ||||
| Maximum Current sourced by a I/O pin | 35 | mA | 56 | ||||
| Maximum Current sunk by total I/O pins | 100 | mA | 56 | ||||
| Maximum Current sourced by total I/O pins | 100 | mA | 56 | ||||
| Maximum injected current by a I/O Pin | IINJ(PIN) | -5 | 5 | mA | 56 | ||
| Maximum injected current by total I/O Pins | ΣIINJ(PIN) | -25 | 25 | mA | 56 | ||
| Operation Voltage | VDD | 2.5 | 5.5 | V | VDD = 2.5V ~ 5.5V up to 50 MHz | 57 | |
| LDO Output Voltage | VLDO | 1.62 | 1.8 | 1.98 | V | VDD ≥ 2.5V | 57 |
| Band-gap Voltage | VBG | 1.13 | 1.2 | 1.27 | V | VDD = 2.5 V ~ 5.5 V, TA = -40C~105C | 57 |
| Input Current PA, PB, PC, PD, PE, PF (Quasi-bidirectional mode) | IIN1 | -67 | -75 | μA | VDD = 5.5V, VIN = 0V or VIN=VDD | 57 | |
| Source current (Push-pull Mode, row label partly truncated in text) | ISK1 | 5 | 10 | mA | VDD = 2.5V, VS = 0.45V | 60 | |
| Resolution | 12 | Bit | 64 | ||||
| Integral nonlinearity error | INL | -4 | 4 | LSB | 64 | ||
| ADC clock frequency | FADC | 16 | MHz | AVDD = 4.5V~5.5V | 64 | ||
| Sample rate (FADC/TCONV) | FS | 760 | kSPS | 64 | |||
| Supply voltage (VDDA; row label printed as 'Supplt Current') | VDDA | 3 | 5.5 | V | 64 | ||
| Input voltage | VIN | 0 | V | 64 | |||
| VLVR Threshold Voltage | VLVR | 2 | 2 | 2.4 | V | TA = 25 C | 66 |
| VLVR Threshold Voltage | VLVR | 1.95 | 1.98 | 2.02 | V | TA = -40 C | 66 |
| VLVR Threshold Voltage | VLVR | 2.04 | 2.13 | 2.25 | V | TA = 105 C | 66 |
| Quiescent Current (LVR) | 1 | 5 | μA | AVDD = 5.5 V | 66 | ||
| Brown-out Voltage (Falling edge) | VBOD | 4.45 | 4.53 | 4.56 | V | BOD_VL[1:0]=11 | 66 |
| Brown-out Voltage (Falling edge) | VBOD | 3.74 | 3.8 | 3.84 | V | BOD_VL[1:0]=10 | 66 |
| Brown-out Voltage (Falling edge) | VBOD | 2.73 | 2.77 | 2.85 | V | BOD_VL[1:0]=01 | 66 |
| Brown-out Voltage (Falling edge) | VBOD | 2.22 | 2.25 | 2.28 | V | BOD_VL[1:0]=00 | 66 |
| Brown-out Voltage (Rising edge) | VBOD | 4.34 | 4.39 | 4.41 | V | BOD_VL[1:0]=11 | 66 |
| Brown-out Voltage (Rising edge) | VBOD | 3.65 | 3.69 | 3.71 | V | BOD_VL[1:0]=10 | 66 |
| Brown-out Voltage (Rising edge) | VBOD | 2.66 | 2.69 | 2.7 | V | BOD_VL[1:0]=01 | 66 |
| Brown-out Voltage (Rising edge) | VBOD | 2.16 | 2.19 | 2.2 | V | BOD_VL[1:0]=00 | 66 |
| Brown-out Detector Quiescent Current | IBOD | 140 | μA | AVDD=5.5 V | 66 | ||
| Reset Voltage V+ | VPOR | 1.6 | 2 | 2.4 | V | 66 | |
| VDD Start Voltage to Ensure Power-on Reset | VPOR | 100 | mV | 66 | |||
| VDD Raising Rate to Ensure Power-on Reset | RRVDD | 0.025 | 20 | ms/V | 66 | ||
| Minimum Time for VDD Stays at VPOR to Ensure Power-on Reset | tPOR | 0.5 | ms | 66 | |||
| Flash Supply Voltage | VFLA | 1.62 | 1.8 | 1.98 | V | Source from chip LDO output voltage | 67 |
| Endurance | NENDUR | 20000 | cycles | 67 | |||
| Data Retention | TRET | 10 | year | At 85C | 67 | ||
| Page Erase Time | TERASE | 20 | ms | 67 | |||
| Mass Erase Time | TMER | 40 | ms | 67 | |||
| Program Time | TPROG | 40 | μs | 67 | |||
| Operation Voltage (HXT) | VHXT | 2.5 | 5.5 | V | 61 | ||
| Temperature (HXT) | TA | -40 | 105 | C | 61 | ||
| Clock Frequency (external crystal) | fHXT | 4 | 24 | MHz | External crystal | 61 | |
| Operation Voltage (HRC) | VHRC | 2.5 | 5.5 | V | 62 | ||
| Calibrated Internal Oscillator Frequency (22.1184 MHz HRC) | -1 | 1 | % | +25°C; VDD = 5 V | 62 | ||
| Calibrated Internal Oscillator Frequency (22.1184 MHz HRC) | -2 | 2 | % | -40°C ~ +105°C; VDD = 2.5 V ~ 5.5 V | 62 | ||
| Operation Voltage (LRC) | VLRC | 2.5 | 5.5 | V | 63 | ||
| Calibrated Internal Oscillator Frequency (10 kHz LRC) | -10 | 10 | % | +25°C; VDD =5 V | 63 | ||
| Calibrated Internal Oscillator Frequency (10 kHz LRC) | -50 | 50 | % | -40°C ~ +105°C; VDD = 2.5 V ~ 5.5 V | 63 |
CAD (KiCad official)
- Symbol:
NUC131LD2AE - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
nuc131ld2ae-etched.step/nuc131ld2ae-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nuc131ld2ae.step/nuc131ld2ae.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nuvoton Tech datasheet (74 pp, sha256
01b69b22cdaa8a82, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).