Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NUC131LD2AE

Nuvoton Tech · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)

NUC131LD2AE from Nuvoton Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PB.12 bidirectional General purpose digital I/O pin, with alternate functions CLKO (frequency divider clock output) and BPWM1_CH3 (BPWM1 CH3 output/capture input).
2 PF.5 bidirectional General purpose digital I/O pin, with alternate functions I2C0_SCL (I2C0 clock) and PWM1_CH5 (PWM1 CH5 output/capture input).
3 PF.4 bidirectional General purpose digital I/O pin, with alternate functions I2C0_SDA (I2C0 data input/output) and PWM1_CH4 (PWM1 CH4 output/capture input).
4 PA.11 bidirectional General purpose digital I/O pin, with alternate functions I2C1_SCL (I2C1 clock) and PWM1_CH3 (PWM1 CH3 output/capture input).
5 PA.10 bidirectional General purpose digital I/O pin, with alternate functions I2C1_SDA (I2C1 data input/output) and PWM1_CH2 (PWM1 CH2 output/capture input).
6 PA.9 bidirectional General purpose digital I/O pin, with alternate functions I2C0_SCL (I2C0 clock) and UART1_nCTS (Clear to Send input for UART1).
7 PA.8 bidirectional General purpose digital I/O pin, with alternate functions I2C0_SDA (I2C0 data input/output) and UART1_nRTS (Request to Send output for UART1).
8 PB.4 bidirectional General purpose digital I/O pin, with alternate function UART1_RXD (data receiver input for UART1).
9 PB.5 bidirectional General purpose digital I/O pin, with alternate function UART1_TXD (data transmitter output for UART1).
10 LDO_CAP power_out LDO output pin; the datasheet gives no capacitor or voltage limit for this pin in the excerpt provided.
11 VDD power_in Power supply for I/O ports and LDO source for internal PLL and digital circuit.
12 VSS power_in Ground pin for digital circuit.
13 PB.0 bidirectional General purpose digital I/O pin, with alternate function UART0_RXD (data receiver input for UART0).
14 PB.1 bidirectional General purpose digital I/O pin, with alternate function UART0_TXD (data transmitter output for UART0).
15 PB.2 bidirectional General purpose digital I/O pin, with alternate functions UART0_nRTS (output), TM2_EXT (Timer2 external capture input), TM2 (Timer2 toggle output) and PWM1_BRAKE1 (PWM1 brake input).
16 PB.3 bidirectional General purpose digital I/O pin, with alternate functions UART0_nCTS (input), TM3_EXT (Timer3 external capture input), TM3 (Timer3 toggle output) and PWM1_BRAKE0 (PWM1 brake input).
17 PD.6 bidirectional General purpose digital I/O pin, with alternate functions CAN0_RXD (data receiver input for CAN0) and BPWM1_CH1 (BPWM1 CH1 output/capture input).
18 PD.7 bidirectional General purpose digital I/O pin, with alternate functions CAN0_TXD (data transmitter output for CAN0) and BPWM1_CH0 (BPWM1 CH0 output/capture input).
19 PD.14 bidirectional General purpose digital I/O pin, with alternate functions UART2_RXD (data receiver input for UART2) and BPWM0_CH5 (BPWM0 CH5 output/capture input).
20 PD.15 bidirectional General purpose digital I/O pin, with alternate functions UART2_TXD (data transmitter output for UART2) and BPWM0_CH4 (BPWM0 CH4 input/capture input).
21 PC.3 bidirectional General purpose digital I/O pin, with alternate functions SPI0_MOSI0 (SPI0 Master Out, Slave In) and BPWM0_CH3 (BPWM0 CH3 input/capture input).
22 PC.2 bidirectional General purpose digital I/O pin, with alternate functions SPI0_MISO0 (SPI0 Master In, Slave Out) and BPWM0_CH2 (BPWM0 CH2 input/capture input).
23 PC.1 bidirectional General purpose digital I/O pin, with alternate functions SPI0_CLK (SPI0 serial clock) and BPWM0_CH1 (BPWM0 CH1 input/capture input).
24 PC.0 bidirectional General purpose digital I/O pin, with alternate functions SPI0_SS0 (SPI0 slave select) and BPWM0_CH0 (BPWM0 CH0 input/capture input).
25 PA.15 bidirectional General purpose digital I/O pin, with alternate function PWM0_CH3 (PWM0 CH3 output/capture input).
26 PA.14 bidirectional General purpose digital I/O pin, with alternate function PWM0_CH2 (PWM0 CH2 output/capture input).
27 PA.13 bidirectional General purpose digital I/O pin, with alternate functions PWM0_CH1 (PWM0 CH1 output/capture input) and UART5_TXD (data transmitter output for UART5).
28 PA.12 bidirectional General purpose digital I/O pin, with alternate functions PWM0_CH0 (PWM0 CH0 output/capture input) and UART5_RXD (data receiver input for UART5).
29 PF.7 bidirectional General purpose digital I/O pin, with alternate function ICE_DAT (serial wired debugger data); the datasheet recommends a 100 kΩ pull-up resistor on this pin.
30 PF.6 bidirectional General purpose digital I/O pin, with alternate function ICE_CLK (serial wired debugger clock input); the datasheet recommends a 100 kΩ pull-up resistor on this pin.
31 AVSS power_in Ground pin for analog circuit.
32 PA.0 bidirectional General purpose digital I/O pin, with alternate functions ADC_CH0 (ADC analog input channel 0), PWM0_CH4, I2C1_SCL (I2C1 clock), and UART5_TXD (data transmitter output for UART5).
33 PA.1 bidirectional General purpose digital I/O pin, with alternate functions ADC_CH1 (ADC analog input channel 1), PWM0_CH5, I2C1_SDA (I2C1 data input/output), and UART5_RXD (data receiver input for UART5).
34 PA.2 bidirectional General purpose digital I/O pin, with alternate functions ADC_CH2 (ADC analog input channel 2), PWM1_CH0 (PWM1 CH0 output/capture input), and UART3_TXD (data transmitter output for UART3).
35 PA.3 bidirectional General purpose digital I/O pin, with alternate functions ADC_CH3 (ADC analog input channel 3), PWM1_CH1 (PWM1 CH1 output/capture input), and UART3_RXD (data receiver input for UART3).
36 PA.4 bidirectional General purpose digital I/O pin, with alternate function ADC_CH4 (ADC analog input channel 4).
37 PA.5 bidirectional General purpose digital I/O pin, with alternate functions ADC_CH5 (ADC analog input channel 5) and UART3_RXD (data receiver input for UART3).
38 PA.6 bidirectional General purpose digital I/O pin, with alternate functions ADC_CH6 (ADC analog input channel 6) and UART3_TXD (data transmitter output for UART3).
39 PA.7 bidirectional General purpose digital I/O pin, with alternate functions ADC_CH7 (ADC analog input channel 7) and VREF (voltage reference input for ADC).
40 AVDD power_in Power supply for internal analog circuit.
41 PC.7 bidirectional General purpose digital I/O pin, with alternate functions UART4_RXD (data receiver input for UART4), I2C0_SCL (I2C0 clock), and PWM0_BRAKE1 (PWM0 brake input).
42 PC.6 bidirectional General purpose digital I/O pin, with alternate functions UART4_TXD (data transmitter output for UART4), I2C0_SDA (I2C0 data input/output), and PWM0_BRAKE0 (PWM0 brake input).
43 PB.15 bidirectional General purpose digital I/O pin, with alternate functions INT1 (external interrupt 1 input), TM0_EXT (Timer0 external capture input), TM0 (Timer0 toggle output), and BPWM1_CH5 (BPWM1 CH5 output/capture input).
44 PF.0 bidirectional General purpose digital I/O pin, with alternate function XT1_OUT (external 4~24 MHz high speed crystal output).
45 PF.1 bidirectional General purpose digital I/O pin, with alternate function XT1_IN (external 4~24 MHz high speed crystal input).
46 nRESET input External reset input, active LOW, with an internal pull-up that sets the device to its initial state when pulled low; the datasheet recommends a 10 kΩ pull-up resistor and 10 µF capacitor on this pin.
47 PF.8 bidirectional General purpose digital I/O pin, with alternate functions CLKO (frequency divider clock output) and BPWM1_CH4 (BPWM1 CH4 output/capture input).
48 PB.8 bidirectional General purpose digital I/O pin, with alternate functions STADC (ADC external trigger input), TM0 (Timer0 event counter input/toggle output), CLKO (frequency divider clock output), and BPWM1_CH2 (BPWM1 CH2 output/capture input).

Key specifications

Parameter Value
Manufacturer Nuvoton Tech
Package LQFP-48(7x7)
Category Single Chip Microcomputer/Microcontroller
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC Power Supply VDDVSS -0.3 6.1 V 56
Variations between different VDD power pins ΔVDD 50 mV 56
Allowed voltage difference for VDD and AVDD /VDD -AVDD/ 50 mV 56
Variations between different VSS ground pins ΔVSS 50 mV 56
Allowed voltage difference for VSS and AVSS /VSS -AVSS/ 50 mV 56
Oscillator Frequency 1/tCLCL 4 24 MHz 56
Operating Temperature TA -40 105 C 56
Junction Temperature Tj -40 125 C 56
Storage Temperature TST -55 150 C 56
Maximum Current into VDD ΣIDD 120 mA 56
Maximum Current out of VSS ΣISS 120 mA 56
Maximum Current sunk by a I/O pin 35 mA 56
Maximum Current sourced by a I/O pin 35 mA 56
Maximum Current sunk by total I/O pins 100 mA 56
Maximum Current sourced by total I/O pins 100 mA 56
Maximum injected current by a I/O Pin IINJ(PIN) -5 5 mA 56
Maximum injected current by total I/O Pins ΣIINJ(PIN) -25 25 mA 56
Operation Voltage VDD 2.5 5.5 V VDD = 2.5V ~ 5.5V up to 50 MHz 57
LDO Output Voltage VLDO 1.62 1.8 1.98 V VDD ≥ 2.5V 57
Band-gap Voltage VBG 1.13 1.2 1.27 V VDD = 2.5 V ~ 5.5 V, TA = -40C~105C 57
Input Current PA, PB, PC, PD, PE, PF (Quasi-bidirectional mode) IIN1 -67 -75 μA VDD = 5.5V, VIN = 0V or VIN=VDD 57
Source current (Push-pull Mode, row label partly truncated in text) ISK1 5 10 mA VDD = 2.5V, VS = 0.45V 60
Resolution 12 Bit 64
Integral nonlinearity error INL -4 4 LSB 64
ADC clock frequency FADC 16 MHz AVDD = 4.5V~5.5V 64
Sample rate (FADC/TCONV) FS 760 kSPS 64
Supply voltage (VDDA; row label printed as 'Supplt Current') VDDA 3 5.5 V 64
Input voltage VIN 0 V 64
VLVR Threshold Voltage VLVR 2 2 2.4 V TA = 25 C 66
VLVR Threshold Voltage VLVR 1.95 1.98 2.02 V TA = -40 C 66
VLVR Threshold Voltage VLVR 2.04 2.13 2.25 V TA = 105 C 66
Quiescent Current (LVR) 1 5 μA AVDD = 5.5 V 66
Brown-out Voltage (Falling edge) VBOD 4.45 4.53 4.56 V BOD_VL[1:0]=11 66
Brown-out Voltage (Falling edge) VBOD 3.74 3.8 3.84 V BOD_VL[1:0]=10 66
Brown-out Voltage (Falling edge) VBOD 2.73 2.77 2.85 V BOD_VL[1:0]=01 66
Brown-out Voltage (Falling edge) VBOD 2.22 2.25 2.28 V BOD_VL[1:0]=00 66
Brown-out Voltage (Rising edge) VBOD 4.34 4.39 4.41 V BOD_VL[1:0]=11 66
Brown-out Voltage (Rising edge) VBOD 3.65 3.69 3.71 V BOD_VL[1:0]=10 66
Brown-out Voltage (Rising edge) VBOD 2.66 2.69 2.7 V BOD_VL[1:0]=01 66
Brown-out Voltage (Rising edge) VBOD 2.16 2.19 2.2 V BOD_VL[1:0]=00 66
Brown-out Detector Quiescent Current IBOD 140 μA AVDD=5.5 V 66
Reset Voltage V+ VPOR 1.6 2 2.4 V 66
VDD Start Voltage to Ensure Power-on Reset VPOR 100 mV 66
VDD Raising Rate to Ensure Power-on Reset RRVDD 0.025 20 ms/V 66
Minimum Time for VDD Stays at VPOR to Ensure Power-on Reset tPOR 0.5 ms 66
Flash Supply Voltage VFLA 1.62 1.8 1.98 V Source from chip LDO output voltage 67
Endurance NENDUR 20000 cycles 67
Data Retention TRET 10 year At 85C 67
Page Erase Time TERASE 20 ms 67
Mass Erase Time TMER 40 ms 67
Program Time TPROG 40 μs 67
Operation Voltage (HXT) VHXT 2.5 5.5 V 61
Temperature (HXT) TA -40 105 C 61
Clock Frequency (external crystal) fHXT 4 24 MHz External crystal 61
Operation Voltage (HRC) VHRC 2.5 5.5 V 62
Calibrated Internal Oscillator Frequency (22.1184 MHz HRC) -1 1 % +25°C; VDD = 5 V 62
Calibrated Internal Oscillator Frequency (22.1184 MHz HRC) -2 2 % -40°C ~ +105°C; VDD = 2.5 V ~ 5.5 V 62
Operation Voltage (LRC) VLRC 2.5 5.5 V 63
Calibrated Internal Oscillator Frequency (10 kHz LRC) -10 10 % +25°C; VDD =5 V 63
Calibrated Internal Oscillator Frequency (10 kHz LRC) -50 50 % -40°C ~ +105°C; VDD = 2.5 V ~ 5.5 V 63

CAD (KiCad official)

  • Symbol: NUC131LD2AE
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: nuc131ld2ae-etched.step / nuc131ld2ae-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nuc131ld2ae.step / nuc131ld2ae.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Nuvoton Tech datasheet (74 pp, sha256 01b69b22cdaa8a82, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF