3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMK20DX128VLH7
NXP Semicon · Pre-ordered MCUs · LQFP-64(10x10)
MK20DX128VLH7 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTE0 | bidirectional | Port E bit 0 GPIO with default function ADC1_SE4a, and alternates including UART1_TX, I2C1_SDA and RTC_CLKOUT. |
| 2 | PTE1/LLWU_P0 | bidirectional | Port E bit 1 GPIO with low-leakage wakeup unit input LLWU_P0, default function ADC1_SE5a, and alternates including UART1_RX and I2C1_SCL. |
| 3 | VDD | power_in | Digital supply pin; the datasheet gives the device voltage range as 1.71 to 3.6 V. |
| 4 | VSS | power_in | Digital ground pin. |
| 5 | USB0_DP | bidirectional | USB full-/low-speed On-the-Go D+ line of the on-chip transceiver. |
| 6 | USB0_DM | bidirectional | USB full-/low-speed On-the-Go D- line of the on-chip transceiver. |
| 7 | VOUT33 | power_out | Output pin of the on-chip USB voltage regulator; its electrical limits are in the USB VREG section, which is not in the supplied text. |
| 8 | VREGIN | power_in | Input supply pin for the on-chip USB voltage regulator; its electrical limits are not in the supplied text. |
| 9 | PGA0_DP/ADC0_DP0/ADC1_DP3 | input | Positive input of programmable gain amplifier 0 (PGA up to x64), shared with ADC0 DP0 and ADC1 DP3 differential inputs. |
| 10 | PGA0_DM/ADC0_DM0/ADC1_DM3 | input | Negative input of programmable gain amplifier 0, shared with ADC0 DM0 and ADC1 DM3 differential inputs. |
| 11 | PGA1_DP/ADC1_DP0/ADC0_DP3 | input | Positive input of programmable gain amplifier 1 (PGA up to x64), shared with ADC1 DP0 and ADC0 DP3 differential inputs. |
| 12 | PGA1_DM/ADC1_DM0/ADC0_DM3 | input | Negative input of programmable gain amplifier 1, shared with ADC1 DM0 and ADC0 DM3 differential inputs. |
| 13 | VDDA | power_in | Analog supply pin for the ADC, PGA, CMP, DAC and reference circuits. |
| 14 | VREFH | power_in | Positive voltage reference pin. |
| 15 | VREFL | power_in | Negative (low) voltage reference pin. |
| 16 | VSSA | power_in | Analog ground pin. |
| 17 | VREF_OUT/CMP1_IN5/CMP0_IN5/ADC1_SE18 | output | Voltage reference output, also usable as CMP1 and CMP0 input 5 and ADC1 SE18 analog input. |
| 18 | DAC0_OUT/CMP1_IN3/ADC0_SE23 | output | 12-bit DAC output, also usable as CMP1 input 3 and ADC0 SE23 analog input. |
| 19 | XTAL32 | output | 32 kHz crystal oscillator output pin. |
| 20 | EXTAL32 | input | 32 kHz crystal oscillator input pin. |
| 21 | VBAT | power_in | VBAT supply pin as listed in the pinout; its electrical limits are not in the supplied text. |
| 22 | PTA0 | bidirectional | Port A bit 0 GPIO whose default function is JTAG_TCLK/SWD_CLK/EZP_CLK, with TSI0_CH1, UART0_CTS_b and FTM0_CH5 also listed. |
| 23 | PTA1 | bidirectional | Port A bit 1 GPIO whose default function is JTAG_TDI/EZP_DI, with TSI0_CH2, UART0_RX and FTM0_CH6 also listed. |
| 24 | PTA2 | bidirectional | Port A bit 2 GPIO whose default function is JTAG_TDO/TRACE_SWO/EZP_DO, with TSI0_CH3, UART0_TX and FTM0_CH7 also listed. |
| 25 | PTA3 | bidirectional | Port A bit 3 GPIO whose default function is JTAG_TMS/SWD_DIO, with TSI0_CH4, UART0_RTS_b and FTM0_CH0 also listed. |
| 26 | PTA4/LLWU_P3 | bidirectional | Port A bit 4 GPIO with wakeup input LLWU_P3, default function NMI_b/EZP_CS_b, and alternates including TSI0_CH5 and FTM0_CH1. |
| 27 | PTA5 | bidirectional | Port A bit 5 GPIO that is disabled at reset, with alternates including USB_CLKIN, FTM0_CH2, CMP2_OUT and JTAG_TRST_b. |
| 28 | PTA12 | bidirectional | Port A bit 12 GPIO with default function CMP2_IN0, and alternates including CAN0_TX, FTM1_CH0 and I2S0_TXD0. |
| 29 | PTA13/LLWU_P4 | bidirectional | Port A bit 13 GPIO with wakeup input LLWU_P4, default function CMP2_IN1, and alternates including CAN0_RX and FTM1_CH1. |
| 30 | VDD | power_in | Digital supply pin; the datasheet gives the device voltage range as 1.71 to 3.6 V. |
| 31 | VSS | power_in | Digital ground pin. |
| 32 | PTA18 | bidirectional | Port A bit 18 GPIO whose default function is the EXTAL0 oscillator input, with alternates FTM0_FLT2 and FTM_CLKIN0. |
| 33 | PTA19 | bidirectional | Port A bit 19 GPIO whose default function is the XTAL0 oscillator output, with alternates FTM1_FLT0, FTM_CLKIN1 and LPTMR0_ALT1. |
| 34 | RESET_b | input | Device reset pin; the _b suffix indicates it is active low. |
| 35 | PTB0/LLWU_P5 | bidirectional | Port B bit 0 GPIO with wakeup input LLWU_P5, default function ADC0_SE8/ADC1_SE8/TSI0_CH0, and alternates including I2C0_SCL and FTM1_CH0. |
| 36 | PTB1 | bidirectional | Port B bit 1 GPIO with default function ADC0_SE9/ADC1_SE9/TSI0_CH6, and alternates including I2C0_SDA and FTM1_CH1. |
| 37 | PTB2 | bidirectional | Port B bit 2 GPIO with default function ADC0_SE12/TSI0_CH7, and alternates including I2C0_SCL, UART0_RTS_b and FTM0_FLT3. |
| 38 | PTB3 | bidirectional | Port B bit 3 GPIO with default function ADC0_SE13/TSI0_CH8, and alternates including I2C0_SDA, UART0_CTS_b and FTM0_FLT0. |
| 39 | PTB16 | bidirectional | Port B bit 16 GPIO with default function TSI0_CH9, and alternates including UART0_RX, FB_AD17 and EWM_IN. |
| 40 | PTB17 | bidirectional | Port B bit 17 GPIO with default function TSI0_CH10, and alternates including UART0_TX, FB_AD16 and EWM_OUT_b. |
| 41 | PTB18 | bidirectional | Port B bit 18 GPIO with default function TSI0_CH11, and alternates including CAN0_TX, FTM2_CH0 and I2S0_TX_BCLK. |
| 42 | PTB19 | bidirectional | Port B bit 19 GPIO with default function TSI0_CH12, and alternates including CAN0_RX, FTM2_CH1 and I2S0_TX_FS. |
| 43 | PTC0 | bidirectional | Port C bit 0 GPIO with default function ADC0_SE14/TSI0_CH13, and alternates including SPI0_PCS4, PDB0_EXTRG and I2S0_TXD1. |
| 44 | PTC1/LLWU_P6 | bidirectional | Port C bit 1 GPIO with wakeup input LLWU_P6, default function ADC0_SE15/TSI0_CH14, and alternates including SPI0_PCS3 and UART1_RTS_b. |
| 45 | PTC2 | bidirectional | Port C bit 2 GPIO with default function ADC0_SE4b/CMP1_IN0/TSI0_CH15, and alternates including SPI0_PCS2 and UART1_CTS_b. |
| 46 | PTC3/LLWU_P7 | bidirectional | Port C bit 3 GPIO with wakeup input LLWU_P7, default function CMP1_IN1, and alternates including SPI0_PCS1, UART1_RX and CLKOUT. |
| 47 | VSS | power_in | Digital ground pin. |
| 48 | VDD | power_in | Digital supply pin; the datasheet gives the device voltage range as 1.71 to 3.6 V. |
| 49 | PTC4/LLWU_P8 | bidirectional | Port C bit 4 GPIO with wakeup input LLWU_P8, disabled at reset, and alternates including SPI0_PCS0, UART1_TX and CMP1_OUT. |
| 50 | PTC5/LLWU_P9 | bidirectional | Port C bit 5 GPIO with wakeup input LLWU_P9, disabled at reset, and alternates including SPI0_SCK, LPTMR0_ALT2 and CMP0_OUT. |
| 51 | PTC6/LLWU_P10 | bidirectional | Port C bit 6 GPIO with wakeup input LLWU_P10, default function CMP0_IN0, and alternates including SPI0_SOUT, PDB0_EXTRG and I2S0_RX_BCLK. |
| 52 | PTC7 | bidirectional | Port C bit 7 GPIO with default function CMP0_IN1, and alternates including SPI0_SIN, USB_SOF_OUT and I2S0_RX_FS. |
| 53 | PTC8 | bidirectional | Port C bit 8 GPIO with default function ADC1_SE4b/CMP0_IN2, and alternates including I2S0_MCLK and FB_AD7. |
| 54 | PTC9 | bidirectional | Port C bit 9 GPIO with default function ADC1_SE5b/CMP0_IN3, and alternates including I2S0_RX_BCLK, FB_AD6 and FTM2_FLT0. |
| 55 | PTC10 | bidirectional | Port C bit 10 GPIO with default function ADC1_SE6b, and alternates including I2C1_SCL, I2S0_RX_FS and FB_AD5. |
| 56 | PTC11/LLWU_P11 | bidirectional | Port C bit 11 GPIO with wakeup input LLWU_P11, default function ADC1_SE7b, and alternates including I2C1_SDA, I2S0_RXD1 and FB_RW_b. |
| 57 | PTD0/LLWU_P12 | bidirectional | Port D bit 0 GPIO with wakeup input LLWU_P12, disabled at reset, and alternates including SPI0_PCS0, UART2_RTS_b and FB_ALE/FB_CS1_b/FB_TS_b. |
| 58 | PTD1 | bidirectional | Port D bit 1 GPIO with default function ADC0_SE5b, and alternates including SPI0_SCK, UART2_CTS_b and FB_CS0_b. |
| 59 | PTD2/LLWU_P13 | bidirectional | Port D bit 2 GPIO with wakeup input LLWU_P13, disabled at reset, and alternates including SPI0_SOUT, UART2_RX and FB_AD4. |
| 60 | PTD3 | bidirectional | Port D bit 3 GPIO that is disabled at reset, with alternates including SPI0_SIN, UART2_TX and FB_AD3. |
| 61 | PTD4/LLWU_P14 | bidirectional | Port D bit 4 GPIO with wakeup input LLWU_P14, disabled at reset, and alternates including SPI0_PCS1, UART0_RTS_b and EWM_IN. |
| 62 | PTD5 | bidirectional | Port D bit 5 GPIO with default function ADC0_SE6b, and alternates including SPI0_PCS2, UART0_CTS_b and FTM0_CH5. |
| 63 | PTD6/LLWU_P15 | bidirectional | Port D bit 6 GPIO with wakeup input LLWU_P15, default function ADC0_SE7b, and alternates including SPI0_PCS3, UART0_RX and FTM0_CH6. |
| 64 | PTD7 | bidirectional | Port D bit 7 GPIO that is disabled at reset, with alternates including CMT_IRO, UART0_TX and FTM0_CH7. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | 150 | °C | 9 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 9 | |||
| Electrostatic discharge voltage, human body model | VHBM | -2000 | 2000 | V | Human body model | 9 | |
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | Charged-device model | 9 | |
| Latch-up current | ILAT | -100 | 100 | mA | Ambient temperature 105°C | 9 | |
| Digital supply voltage | VDD | -0.3 | 3.8 | V | 9 | ||
| Digital supply current | IDD | 185 | mA | 9 | |||
| Digital input voltage | VDIO | -0.3 | 5.5 | V | Except RESET, EXTAL, and XTAL | 10 | |
| Maximum current single pin limit | ID | -25 | 25 | mA | Applies to all digital pins | 10 | |
| USB_DP input voltage | VUSB_DP | -0.3 | 3.63 | V | 10 | ||
| USB_DM input voltage | VUSB_DM | -0.3 | 3.63 | V | 10 | ||
| USB regulator input | VREGIN | -0.3 | 6 | V | 10 | ||
| RTC battery supply voltage | VBAT | -0.3 | 3.8 | V | 10 | ||
| Supply voltage | VDD | 1.71 | 3.6 | V | 11 | ||
| Analog supply voltage | VDDA | 1.71 | 3.6 | V | 11 | ||
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | 0.1 | V | 11 | ||
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | 0.1 | V | 11 | ||
| RTC battery supply voltage | VBAT | 1.71 | 3.6 | V | 11 | ||
| Digital pin negative DC injection current, single pin | IICDIO | -5 | mA | VIN < VSS-0.3V | 11 | ||
| Analog, EXTAL, and XTAL pin DC injection current, single pin (negative) | IICAIO | -5 | mA | VIN < VSS-0.3V (negative current injection) | 11 | ||
| Analog, EXTAL, and XTAL pin DC injection current, single pin (positive) | IICAIO | 5 | mA | VIN > VDD+0.3V (positive current injection) | 11 | ||
| Contiguous pin DC injection current, regional limit (negative) | IICcont | -25 | mA | Negative current injection, 16 contiguous pins | 11 | ||
| Contiguous pin DC injection current, regional limit (positive) | IICcont | 25 | mA | Positive current injection, 16 contiguous pins | 11 | ||
| VDD voltage required to retain RAM | VRAM | 1.2 | V | 11 | |||
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | 12 | |
| Falling low-voltage detect threshold, high range | VLVDH | 2.48 | 2.56 | 2.64 | V | LVDV=01 | 12 |
| Low-voltage warning threshold, level 1 falling, high range | VLVW1H | 2.62 | 2.7 | 2.78 | V | LVWV=00 | 12 |
| Low-voltage warning threshold, level 2 falling, high range | VLVW2H | 2.72 | 2.8 | 2.88 | V | LVWV=01 | 12 |
| Low-voltage warning threshold, level 3 falling, high range | VLVW3H | 2.82 | 2.9 | 2.98 | V | LVWV=10 | 12 |
| Low-voltage warning threshold, level 4 falling, high range | VLVW4H | 2.92 | 3 | 3.08 | V | LVWV=11 | 12 |
| Low-voltage inhibit reset/recover hysteresis, high range | VHYSH | -80 | 80 | mV | 12 | ||
| Falling low-voltage detect threshold, low range | VLVDL | 1.54 | 1.6 | 1.66 | V | LVDV=00 | 12 |
| Low-voltage warning threshold, level 1 falling, low range | VLVW1L | 1.74 | 1.8 | 1.86 | V | LVWV=00 | 12 |
| Low-voltage warning threshold, level 2 falling, low range | VLVW2L | 1.84 | 1.9 | 1.96 | V | LVWV=01 | 12 |
| Low-voltage warning threshold, level 3 falling, low range | VLVW3L | 1.94 | 2 | 2.06 | V | LVWV=10 | 12 |
| Low-voltage warning threshold, level 4 falling, low range | VLVW4L | 2.04 | 2.1 | 2.16 | V | LVWV=11 | 12 |
| Low-voltage inhibit reset/recover hysteresis, low range | VHYSL | -60 | 60 | mV | 12 | ||
| Bandgap voltage reference | VBG | 0.97 | 1 | 1.03 | V | 12 | |
| Internal low power oscillator period, factory trimmed | tLPO | 900 | 1000 | 1100 | μs | 12 | |
| Falling VBAT supply POR detect voltage | VPOR_VBAT | 0.8 | 1.1 | 1.5 | V | 12 | |
| Internal reference frequency (slow clock), user trimmed | fints_t | 31.25 | 39.0625 | kHz | 26 | ||
| Resolution of trimmed average DCO output frequency at fixed voltage and temperature | Δfdco_res_t | -0.6 | 0.3 | 0.6 | %fdco | Using SCTRIM and SCFTRIM | 26 |
| Resolution of trimmed average DCO output frequency at fixed voltage and temperature | Δfdco_res_t | -0.5 | 0.2 | 0.5 | %fdco | Using SCTRIM only | 26 |
| Total deviation of trimmed average DCO output frequency over voltage and temperature | Δfdco_t | -0.7 | 0.5 | %fdco | 26 | ||
| Internal reference frequency (fast clock), user trimmed | fintf_t | 3 | 5 | MHz | At nominal VDD and 25 °C | 26 | |
| FLL reference frequency range | ffll_ref | 31.25 | 39.0625 | kHz | 26 | ||
| Oscillator crystal or resonator frequency, low frequency mode | fosc_lo | 32 | 40 | kHz | MCG_C2[RANGE]=00 | 29 | |
| Oscillator crystal or resonator frequency, high frequency mode (low range) | fosc_hi_1 | 3 | 8 | MHz | MCG_C2[RANGE]=01 | 29 | |
| Oscillator crystal or resonator frequency, high frequency mode (high range) | fosc_hi_2 | 8 | 32 | MHz | MCG_C2[RANGE]=1x | 29 | |
| Input clock frequency (external clock mode) | fec_extal | 50 | MHz | 29 | |||
| Input clock duty cycle (external clock mode) | tdc_extal | 40 | 50 | 60 | % | 29 | |
| Supply voltage delta to VDD (VDD - VDDA) | ΔVDDA | -100 | 0 | 100 | mV | 37 | |
| ADC conversion clock frequency | fADCK | 1 | 18 | MHz | ≤ 13-bit mode | 37 | |
| ADC conversion clock frequency | fADCK | 2 | 12 | MHz | 16-bit mode | 37 | |
| Supply current, high-speed mode | IDDHS | 200 | μA | EN=1, PMODE=1 | 44 | ||
| Supply current, low-speed mode | IDDLS | 20 | μA | EN=1, PMODE=0 | 44 | ||
| Analog input offset voltage | VAIO | 20 | mV | 44 | |||
| Output low | VCMPOl | 0.5 | V | 44 | |||
| Propagation delay, high-speed mode | tDHS | 20 | 50 | 200 | ns | EN=1, PMODE=1 | 44 |
CAD (KiCad official)
- Symbol:
MK20DX128VLH7 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
mk20dx128vlh7-etched.step/mk20dx128vlh7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mk20dx128vlh7.step/mk20dx128vlh7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (67 pp, sha256
1c30cce4ece1669e, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).