main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mk20dx128vlh7: symbol repaired (body fitted to the names) · Ray
mk20dx128vlh7-etched.glb Publish 0.1.0 · Ray
mk20dx128vlh7-etched.step mk20dx128vlh7: factory component page (tier=lcsc) · Ray
mk20dx128vlh7-hero.glb mk20dx128vlh7: hero GLB from the etched model (keeps the MPN mark) · Ray
mk20dx128vlh7-hero.overlay.json Publish 0.1.0 · Ray
mk20dx128vlh7.glb Publish 0.1.0 · Ray
mk20dx128vlh7.kicad_mod Publish 0.1.0 · Ray
mk20dx128vlh7.kicad_sym mk20dx128vlh7: symbol repaired (body fitted to the names) · Ray
mk20dx128vlh7.lbr mk20dx128vlh7: symbol repaired (body fitted to the names) · Ray
mk20dx128vlh7.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 64 pins · Ray

MK20DX128VLH7

NXP Semicon · Pre-ordered MCUs · LQFP-64(10x10)

MK20DX128VLH7 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PTE0 bidirectional Port E bit 0 GPIO with default function ADC1_SE4a, and alternates including UART1_TX, I2C1_SDA and RTC_CLKOUT.
2 PTE1/LLWU_P0 bidirectional Port E bit 1 GPIO with low-leakage wakeup unit input LLWU_P0, default function ADC1_SE5a, and alternates including UART1_RX and I2C1_SCL.
3 VDD power_in Digital supply pin; the datasheet gives the device voltage range as 1.71 to 3.6 V.
4 VSS power_in Digital ground pin.
5 USB0_DP bidirectional USB full-/low-speed On-the-Go D+ line of the on-chip transceiver.
6 USB0_DM bidirectional USB full-/low-speed On-the-Go D- line of the on-chip transceiver.
7 VOUT33 power_out Output pin of the on-chip USB voltage regulator; its electrical limits are in the USB VREG section, which is not in the supplied text.
8 VREGIN power_in Input supply pin for the on-chip USB voltage regulator; its electrical limits are not in the supplied text.
9 PGA0_DP/ADC0_DP0/ADC1_DP3 input Positive input of programmable gain amplifier 0 (PGA up to x64), shared with ADC0 DP0 and ADC1 DP3 differential inputs.
10 PGA0_DM/ADC0_DM0/ADC1_DM3 input Negative input of programmable gain amplifier 0, shared with ADC0 DM0 and ADC1 DM3 differential inputs.
11 PGA1_DP/ADC1_DP0/ADC0_DP3 input Positive input of programmable gain amplifier 1 (PGA up to x64), shared with ADC1 DP0 and ADC0 DP3 differential inputs.
12 PGA1_DM/ADC1_DM0/ADC0_DM3 input Negative input of programmable gain amplifier 1, shared with ADC1 DM0 and ADC0 DM3 differential inputs.
13 VDDA power_in Analog supply pin for the ADC, PGA, CMP, DAC and reference circuits.
14 VREFH power_in Positive voltage reference pin.
15 VREFL power_in Negative (low) voltage reference pin.
16 VSSA power_in Analog ground pin.
17 VREF_OUT/CMP1_IN5/CMP0_IN5/ADC1_SE18 output Voltage reference output, also usable as CMP1 and CMP0 input 5 and ADC1 SE18 analog input.
18 DAC0_OUT/CMP1_IN3/ADC0_SE23 output 12-bit DAC output, also usable as CMP1 input 3 and ADC0 SE23 analog input.
19 XTAL32 output 32 kHz crystal oscillator output pin.
20 EXTAL32 input 32 kHz crystal oscillator input pin.
21 VBAT power_in VBAT supply pin as listed in the pinout; its electrical limits are not in the supplied text.
22 PTA0 bidirectional Port A bit 0 GPIO whose default function is JTAG_TCLK/SWD_CLK/EZP_CLK, with TSI0_CH1, UART0_CTS_b and FTM0_CH5 also listed.
23 PTA1 bidirectional Port A bit 1 GPIO whose default function is JTAG_TDI/EZP_DI, with TSI0_CH2, UART0_RX and FTM0_CH6 also listed.
24 PTA2 bidirectional Port A bit 2 GPIO whose default function is JTAG_TDO/TRACE_SWO/EZP_DO, with TSI0_CH3, UART0_TX and FTM0_CH7 also listed.
25 PTA3 bidirectional Port A bit 3 GPIO whose default function is JTAG_TMS/SWD_DIO, with TSI0_CH4, UART0_RTS_b and FTM0_CH0 also listed.
26 PTA4/LLWU_P3 bidirectional Port A bit 4 GPIO with wakeup input LLWU_P3, default function NMI_b/EZP_CS_b, and alternates including TSI0_CH5 and FTM0_CH1.
27 PTA5 bidirectional Port A bit 5 GPIO that is disabled at reset, with alternates including USB_CLKIN, FTM0_CH2, CMP2_OUT and JTAG_TRST_b.
28 PTA12 bidirectional Port A bit 12 GPIO with default function CMP2_IN0, and alternates including CAN0_TX, FTM1_CH0 and I2S0_TXD0.
29 PTA13/LLWU_P4 bidirectional Port A bit 13 GPIO with wakeup input LLWU_P4, default function CMP2_IN1, and alternates including CAN0_RX and FTM1_CH1.
30 VDD power_in Digital supply pin; the datasheet gives the device voltage range as 1.71 to 3.6 V.
31 VSS power_in Digital ground pin.
32 PTA18 bidirectional Port A bit 18 GPIO whose default function is the EXTAL0 oscillator input, with alternates FTM0_FLT2 and FTM_CLKIN0.
33 PTA19 bidirectional Port A bit 19 GPIO whose default function is the XTAL0 oscillator output, with alternates FTM1_FLT0, FTM_CLKIN1 and LPTMR0_ALT1.
34 RESET_b input Device reset pin; the _b suffix indicates it is active low.
35 PTB0/LLWU_P5 bidirectional Port B bit 0 GPIO with wakeup input LLWU_P5, default function ADC0_SE8/ADC1_SE8/TSI0_CH0, and alternates including I2C0_SCL and FTM1_CH0.
36 PTB1 bidirectional Port B bit 1 GPIO with default function ADC0_SE9/ADC1_SE9/TSI0_CH6, and alternates including I2C0_SDA and FTM1_CH1.
37 PTB2 bidirectional Port B bit 2 GPIO with default function ADC0_SE12/TSI0_CH7, and alternates including I2C0_SCL, UART0_RTS_b and FTM0_FLT3.
38 PTB3 bidirectional Port B bit 3 GPIO with default function ADC0_SE13/TSI0_CH8, and alternates including I2C0_SDA, UART0_CTS_b and FTM0_FLT0.
39 PTB16 bidirectional Port B bit 16 GPIO with default function TSI0_CH9, and alternates including UART0_RX, FB_AD17 and EWM_IN.
40 PTB17 bidirectional Port B bit 17 GPIO with default function TSI0_CH10, and alternates including UART0_TX, FB_AD16 and EWM_OUT_b.
41 PTB18 bidirectional Port B bit 18 GPIO with default function TSI0_CH11, and alternates including CAN0_TX, FTM2_CH0 and I2S0_TX_BCLK.
42 PTB19 bidirectional Port B bit 19 GPIO with default function TSI0_CH12, and alternates including CAN0_RX, FTM2_CH1 and I2S0_TX_FS.
43 PTC0 bidirectional Port C bit 0 GPIO with default function ADC0_SE14/TSI0_CH13, and alternates including SPI0_PCS4, PDB0_EXTRG and I2S0_TXD1.
44 PTC1/LLWU_P6 bidirectional Port C bit 1 GPIO with wakeup input LLWU_P6, default function ADC0_SE15/TSI0_CH14, and alternates including SPI0_PCS3 and UART1_RTS_b.
45 PTC2 bidirectional Port C bit 2 GPIO with default function ADC0_SE4b/CMP1_IN0/TSI0_CH15, and alternates including SPI0_PCS2 and UART1_CTS_b.
46 PTC3/LLWU_P7 bidirectional Port C bit 3 GPIO with wakeup input LLWU_P7, default function CMP1_IN1, and alternates including SPI0_PCS1, UART1_RX and CLKOUT.
47 VSS power_in Digital ground pin.
48 VDD power_in Digital supply pin; the datasheet gives the device voltage range as 1.71 to 3.6 V.
49 PTC4/LLWU_P8 bidirectional Port C bit 4 GPIO with wakeup input LLWU_P8, disabled at reset, and alternates including SPI0_PCS0, UART1_TX and CMP1_OUT.
50 PTC5/LLWU_P9 bidirectional Port C bit 5 GPIO with wakeup input LLWU_P9, disabled at reset, and alternates including SPI0_SCK, LPTMR0_ALT2 and CMP0_OUT.
51 PTC6/LLWU_P10 bidirectional Port C bit 6 GPIO with wakeup input LLWU_P10, default function CMP0_IN0, and alternates including SPI0_SOUT, PDB0_EXTRG and I2S0_RX_BCLK.
52 PTC7 bidirectional Port C bit 7 GPIO with default function CMP0_IN1, and alternates including SPI0_SIN, USB_SOF_OUT and I2S0_RX_FS.
53 PTC8 bidirectional Port C bit 8 GPIO with default function ADC1_SE4b/CMP0_IN2, and alternates including I2S0_MCLK and FB_AD7.
54 PTC9 bidirectional Port C bit 9 GPIO with default function ADC1_SE5b/CMP0_IN3, and alternates including I2S0_RX_BCLK, FB_AD6 and FTM2_FLT0.
55 PTC10 bidirectional Port C bit 10 GPIO with default function ADC1_SE6b, and alternates including I2C1_SCL, I2S0_RX_FS and FB_AD5.
56 PTC11/LLWU_P11 bidirectional Port C bit 11 GPIO with wakeup input LLWU_P11, default function ADC1_SE7b, and alternates including I2C1_SDA, I2S0_RXD1 and FB_RW_b.
57 PTD0/LLWU_P12 bidirectional Port D bit 0 GPIO with wakeup input LLWU_P12, disabled at reset, and alternates including SPI0_PCS0, UART2_RTS_b and FB_ALE/FB_CS1_b/FB_TS_b.
58 PTD1 bidirectional Port D bit 1 GPIO with default function ADC0_SE5b, and alternates including SPI0_SCK, UART2_CTS_b and FB_CS0_b.
59 PTD2/LLWU_P13 bidirectional Port D bit 2 GPIO with wakeup input LLWU_P13, disabled at reset, and alternates including SPI0_SOUT, UART2_RX and FB_AD4.
60 PTD3 bidirectional Port D bit 3 GPIO that is disabled at reset, with alternates including SPI0_SIN, UART2_TX and FB_AD3.
61 PTD4/LLWU_P14 bidirectional Port D bit 4 GPIO with wakeup input LLWU_P14, disabled at reset, and alternates including SPI0_PCS1, UART0_RTS_b and EWM_IN.
62 PTD5 bidirectional Port D bit 5 GPIO with default function ADC0_SE6b, and alternates including SPI0_PCS2, UART0_CTS_b and FTM0_CH5.
63 PTD6/LLWU_P15 bidirectional Port D bit 6 GPIO with wakeup input LLWU_P15, default function ADC0_SE7b, and alternates including SPI0_PCS3, UART0_RX and FTM0_CH6.
64 PTD7 bidirectional Port D bit 7 GPIO that is disabled at reset, with alternates including CMT_IRO, UART0_TX and FTM0_CH7.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TSTG -55 150 °C 9
Solder temperature, lead-free TSDR 260 °C 9
Electrostatic discharge voltage, human body model VHBM -2000 2000 V Human body model 9
Electrostatic discharge voltage, charged-device model VCDM -500 500 V Charged-device model 9
Latch-up current ILAT -100 100 mA Ambient temperature 105°C 9
Digital supply voltage VDD -0.3 3.8 V 9
Digital supply current IDD 185 mA 9
Digital input voltage VDIO -0.3 5.5 V Except RESET, EXTAL, and XTAL 10
Maximum current single pin limit ID -25 25 mA Applies to all digital pins 10
USB_DP input voltage VUSB_DP -0.3 3.63 V 10
USB_DM input voltage VUSB_DM -0.3 3.63 V 10
USB regulator input VREGIN -0.3 6 V 10
RTC battery supply voltage VBAT -0.3 3.8 V 10
Supply voltage VDD 1.71 3.6 V 11
Analog supply voltage VDDA 1.71 3.6 V 11
VDD-to-VDDA differential voltage VDD, VDDA -0.1 0.1 V 11
VSS-to-VSSA differential voltage VSS, VSSA -0.1 0.1 V 11
RTC battery supply voltage VBAT 1.71 3.6 V 11
Digital pin negative DC injection current, single pin IICDIO -5 mA VIN < VSS-0.3V 11
Analog, EXTAL, and XTAL pin DC injection current, single pin (negative) IICAIO -5 mA VIN < VSS-0.3V (negative current injection) 11
Analog, EXTAL, and XTAL pin DC injection current, single pin (positive) IICAIO 5 mA VIN > VDD+0.3V (positive current injection) 11
Contiguous pin DC injection current, regional limit (negative) IICcont -25 mA Negative current injection, 16 contiguous pins 11
Contiguous pin DC injection current, regional limit (positive) IICcont 25 mA Positive current injection, 16 contiguous pins 11
VDD voltage required to retain RAM VRAM 1.2 V 11
Falling VDD POR detect voltage VPOR 0.8 1.1 1.5 V 12
Falling low-voltage detect threshold, high range VLVDH 2.48 2.56 2.64 V LVDV=01 12
Low-voltage warning threshold, level 1 falling, high range VLVW1H 2.62 2.7 2.78 V LVWV=00 12
Low-voltage warning threshold, level 2 falling, high range VLVW2H 2.72 2.8 2.88 V LVWV=01 12
Low-voltage warning threshold, level 3 falling, high range VLVW3H 2.82 2.9 2.98 V LVWV=10 12
Low-voltage warning threshold, level 4 falling, high range VLVW4H 2.92 3 3.08 V LVWV=11 12
Low-voltage inhibit reset/recover hysteresis, high range VHYSH -80 80 mV 12
Falling low-voltage detect threshold, low range VLVDL 1.54 1.6 1.66 V LVDV=00 12
Low-voltage warning threshold, level 1 falling, low range VLVW1L 1.74 1.8 1.86 V LVWV=00 12
Low-voltage warning threshold, level 2 falling, low range VLVW2L 1.84 1.9 1.96 V LVWV=01 12
Low-voltage warning threshold, level 3 falling, low range VLVW3L 1.94 2 2.06 V LVWV=10 12
Low-voltage warning threshold, level 4 falling, low range VLVW4L 2.04 2.1 2.16 V LVWV=11 12
Low-voltage inhibit reset/recover hysteresis, low range VHYSL -60 60 mV 12
Bandgap voltage reference VBG 0.97 1 1.03 V 12
Internal low power oscillator period, factory trimmed tLPO 900 1000 1100 μs 12
Falling VBAT supply POR detect voltage VPOR_VBAT 0.8 1.1 1.5 V 12
Internal reference frequency (slow clock), user trimmed fints_t 31.25 39.0625 kHz 26
Resolution of trimmed average DCO output frequency at fixed voltage and temperature Δfdco_res_t -0.6 0.3 0.6 %fdco Using SCTRIM and SCFTRIM 26
Resolution of trimmed average DCO output frequency at fixed voltage and temperature Δfdco_res_t -0.5 0.2 0.5 %fdco Using SCTRIM only 26
Total deviation of trimmed average DCO output frequency over voltage and temperature Δfdco_t -0.7 0.5 %fdco 26
Internal reference frequency (fast clock), user trimmed fintf_t 3 5 MHz At nominal VDD and 25 °C 26
FLL reference frequency range ffll_ref 31.25 39.0625 kHz 26
Oscillator crystal or resonator frequency, low frequency mode fosc_lo 32 40 kHz MCG_C2[RANGE]=00 29
Oscillator crystal or resonator frequency, high frequency mode (low range) fosc_hi_1 3 8 MHz MCG_C2[RANGE]=01 29
Oscillator crystal or resonator frequency, high frequency mode (high range) fosc_hi_2 8 32 MHz MCG_C2[RANGE]=1x 29
Input clock frequency (external clock mode) fec_extal 50 MHz 29
Input clock duty cycle (external clock mode) tdc_extal 40 50 60 % 29
Supply voltage delta to VDD (VDD - VDDA) ΔVDDA -100 0 100 mV 37
ADC conversion clock frequency fADCK 1 18 MHz ≤ 13-bit mode 37
ADC conversion clock frequency fADCK 2 12 MHz 16-bit mode 37
Supply current, high-speed mode IDDHS 200 μA EN=1, PMODE=1 44
Supply current, low-speed mode IDDLS 20 μA EN=1, PMODE=0 44
Analog input offset voltage VAIO 20 mV 44
Output low VCMPOl 0.5 V 44
Propagation delay, high-speed mode tDHS 20 50 200 ns EN=1, PMODE=1 44

CAD (KiCad official)

  • Symbol: MK20DX128VLH7
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: mk20dx128vlh7-etched.step / mk20dx128vlh7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mk20dx128vlh7.step / mk20dx128vlh7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (67 pp, sha256 1c30cce4ece1669e, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF