FM25V20A-GTR from Infineon, in a SOIC-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	CS	input	Chip Select (active LOW). Activates the device; when HIGH, device enters low-power standby, ignores other inputs, and tristates SO. A falling edge on CS must precede every opcode.
2	SO	output	Serial Output (MISO). Data output pin, driven during a read and tristated otherwise. Data transitions on the falling edge of SCK.
3	WP	input	Write Protect (active LOW). Prevents writes to the Status Register when WPEN=1. Must be tied to VDD if not used.
4	VSS	power_in	Ground for the device. Must be connected to system ground.
5	SI	input	Serial Input (MOSI). All data is clocked in on this pin on the rising edge of SCK. Should always be driven to a valid logic level to meet IDD specifications.
6	SCK	input	Serial Clock. All I/O activity is synchronized to SCK; inputs latched on rising edge, outputs change on falling edge. 0 to 40 MHz; may be interrupted at any time.
7	DNU	unconnected	Do Not Use. Leave floating (not connected on the board) or tie to VDD.
8	VDD	power_in	Power supply input. Operating range VDD = 2.0 V to 3.6 V.

Key specifications

Parameter	Value
Manufacturer	Infineon
Package	SOIC-8-208mil
Category	Memory
Pins	8

Ordering variants

Same part, different packaging or reel option.

FM25V20A-GTR
FM25V20A-GTRG
FM25V20A-GTRG-TR
FM25V20A-GTRDG
FM25V20A-GTRDG-TR

CAD (KiCad official)

Symbol: FM25V20A-GTR
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8-208mil (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`fm25v20a-gtr.step`	122 KB	You want the bare part, or you mark your own boards.
`fm25v20a-gtr-etched.step`	2.2 MB	You want the part with `FM25V20A-GTR` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 545 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Infineon datasheet (21 pp, sha256 f6e390f3deea1c4d, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF