main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs fm25v20a-gtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers fm25v20a-gtr: viewers · Ray
fm25v20a-gtr-etched.fit.json fm25v20a-gtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
fm25v20a-gtr-etched.glb fm25v20a-gtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
fm25v20a-gtr-etched.step fm25v20a-gtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
fm25v20a-gtr.glb Publish 0.1.0 · Ray
fm25v20a-gtr.kicad_mod Publish 0.1.0 · Ray
fm25v20a-gtr.kicad_sym Publish 0.1.0 · Ray
fm25v20a-gtr.lbr Publish 0.1.0 · Ray
fm25v20a-gtr.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json fm25v20a-gtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md fm25v20a-gtr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

FM25V20A-GTR

Infineon · FRAM · SOIC-8-208mil

FM25V20A-GTR from Infineon, in a SOIC-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS input Chip Select (active LOW). Activates the device; when HIGH, device enters low-power standby, ignores other inputs, and tristates SO. A falling edge on CS must precede every opcode.
2 SO output Serial Output (MISO). Data output pin, driven during a read and tristated otherwise. Data transitions on the falling edge of SCK.
3 WP input Write Protect (active LOW). Prevents writes to the Status Register when WPEN=1. Must be tied to VDD if not used.
4 VSS power_in Ground for the device. Must be connected to system ground.
5 SI input Serial Input (MOSI). All data is clocked in on this pin on the rising edge of SCK. Should always be driven to a valid logic level to meet IDD specifications.
6 SCK input Serial Clock. All I/O activity is synchronized to SCK; inputs latched on rising edge, outputs change on falling edge. 0 to 40 MHz; may be interrupted at any time.
7 DNU unconnected Do Not Use. Leave floating (not connected on the board) or tie to VDD.
8 VDD power_in Power supply input. Operating range VDD = 2.0 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer Infineon
Package SOIC-8-208mil
Category Memory
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • FM25V20A-GTR
  • FM25V20A-GTRG
  • FM25V20A-GTRG-TR
  • FM25V20A-GTRDG
  • FM25V20A-GTRDG-TR

CAD (KiCad official)

  • Symbol: FM25V20A-GTR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8-208mil (KiCad packages3D, STEP)
  • 3D model files: fm25v20a-gtr-etched.step / fm25v20a-gtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fm25v20a-gtr.step / fm25v20a-gtr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
fm25v20a-gtr.step 122 KB You want the bare part, or you mark your own boards.
fm25v20a-gtr-etched.step 2.2 MB You want the part with FM25V20A-GTR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 545 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon datasheet (21 pp, sha256 f6e390f3deea1c4d, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF