component
GP9105-F50-N-SW
Public Made by Adomby adom
Guestgood Analog To Digital Converters (ADC), SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGP9105-F50-N-SW
Guestgood · Analog To Digital Converters (ADC) · SOP-8
GP9105-F50-N-SW from Guestgood, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect; leave unconnected. |
| 2 | NC | unconnected | No connect; leave unconnected. |
| 3 | VIN | power_in | Analog voltage input, range 0 V to VCC (absolute maximum -0.3 V to VCC + 0.3 V), converted to PWM duty cycle DPWM = VIN/VCC. |
| 4 | NC | unconnected | No connect; leave unconnected. |
| 5 | GND | power_in | Ground. |
| 6 | PWM | output | PWM duty-cycle output, 0% to 100% duty, frequency 1 Hz to 1 MHz (default 1 kHz). |
| 7 | PWMB | output | Complementary signal of the PWM output. |
| 8 | VCC | power_in | Power supply, 2.7 V to 5.5 V (typical 5 V); the SW ordering options list 4.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Guestgood |
| Package | SOP-8 |
| Category | Data Acquisition |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.7 | 5 | 5.5 | V | 6 | |
| Supply voltage (ordering variant -SW) | VCC | 4.5 | 5.5 | V | Ordering table, GP9105-F*-N-SW | 8 | |
| Operating temperature (ordering variant -SW) | -40 | 85 | °C | Ordering table, GP9105-F*-N-SW | 8 | ||
| PWM frequency error | ∆fpwm | -3 | 0 | 3 | % | 6 | |
| PWM duty cycle range | Dpwm | 0 | 100 | % | Average duty cycle (note 2) | 6 | |
| PWM duty cycle error | ∆Dpwm | 0.5 | 1 | % | 6 | ||
| PWM jitter | Jpwm | 0.1 | 0.2 | %p-p | Measured at 1 kHz (note 3) | 6 | |
| Supply current | ICC | 2 | 5 | mA | VCC @ 5.0V | 6 | |
| Input voltage | VIN | 0 | V | Max printed as VCC (expression, not converted) | 6 | ||
| Input leakage current | IIL | 3 | μA | VIN = VCC or VSS | 6 | ||
| Output leakage current | ILO | 3 | μA | VIN = VCC or VSS | 6 | ||
| Output low voltage | VOL | 0.4 | V | VCC @ 5.0V, IOL = 10 mA | 6 | ||
| Output high voltage | VOH | 0.4 | V | VCC @ 5.0V, IOL = 10 mA; printed as VCC-0.4 V, so the value 0.4 is the offset below VCC (not computed) | 6 | ||
| Output rise time | Tr | 20 | 40 | ns | VCC @ 5.0V, CLOAD=5pF | 6 | |
| Output fall time | Tf | 20 | 40 | ns | VCC @ 5.0V, CLOAD=5pF | 6 | |
| Industrial operating temperature | -40 | 125 | °C | 2 | |||
| Storage temperature | -50 | 125 | °C | 2 | |||
| Input voltage range (absolute) | VIN | -0.3 | V | Max printed as VCC + 0.3 V (expression, not converted) | 2 | ||
| Maximum voltage | 8 | V | 2 | ||||
| ESD protection | 4000 | V | Printed as > 4000 V; test model not stated | 2 |
CAD (KiCad official)
- Symbol:
GP9105-F50-N-SW - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
gp9105-f50-n-sw-etched.step/gp9105-f50-n-sw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gp9105-f50-n-sw.step/gp9105-f50-n-sw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Guestgood datasheet (9 pp, sha256
93fa6e97af1a26b9, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).