3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F25K20T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)
PIC18F25K20T-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2/VREF-/CVREF/C2IN+ | bidirectional | PORTA digital I/O with TTL input, also analog input 2, ADC low reference input, comparator reference output (CVREF) and comparator C2 non-inverting input. |
| 2 | RA3/AN3/VREF+/C1IN+ | bidirectional | PORTA digital I/O with TTL input, also analog input 3, ADC high reference input and comparator C1 non-inverting input. |
| 3 | RA4/T0CKI/C1OUT | bidirectional | PORTA digital I/O with Schmitt Trigger input, also Timer0 external clock input and comparator C1 output. |
| 4 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | PORTA digital I/O with TTL input, also analog input 4, SPI slave select input, High/Low-Voltage Detect input and comparator C2 output. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RA7/OSC1/CLKIN | bidirectional | Oscillator crystal or external clock source input (ST buffer in RC mode, CMOS otherwise), or general purpose I/O pin RA7. |
| 7 | RA6/OSC2/CLKOUT | bidirectional | Oscillator crystal output (or FOSC/4 clock output in RC mode), or general purpose I/O pin RA6. |
| 8 | RC0/T1OSO/T13CKI | bidirectional | PORTC digital I/O with Schmitt Trigger input, also Timer1 oscillator output and Timer1/Timer3 external clock input. |
| 9 | RC1/T1OSI/CCP2 | bidirectional | PORTC digital I/O with Schmitt Trigger input, also Timer1 oscillator input and the default CCP2 capture input/compare output/PWM output. |
| 10 | RC2/CCP1/P1A | bidirectional | PORTC digital I/O with Schmitt Trigger input, also CCP1 capture input/compare output and enhanced CCP1 PWM output P1A. |
| 11 | RC3/SCK/SCL | bidirectional | PORTC digital I/O with Schmitt Trigger input, also synchronous serial clock for SPI (SCK) and I2C (SCL) modes. |
| 12 | RC4/SDI/SDA | bidirectional | PORTC digital I/O with Schmitt Trigger input, also SPI data in (SDI) and I2C data I/O (SDA). |
| 13 | RC5/SDO | bidirectional | PORTC digital I/O with Schmitt Trigger input, also SPI data out (SDO). |
| 14 | RC6/TX/CK | bidirectional | PORTC digital I/O with Schmitt Trigger input, also EUSART asynchronous transmit (TX) and synchronous clock (CK). |
| 15 | RC7/RX/DT | bidirectional | PORTC digital I/O with Schmitt Trigger input, also EUSART asynchronous receive (RX) and synchronous data (DT). |
| 16 | VSS | power_in | Ground reference for logic and I/O pins. |
| 17 | VDD | power_in | Positive supply for logic and I/O pins. |
| 18 | RB0/INT0/FLT0/AN12 | bidirectional | PORTB digital I/O (weak pull-up option), also external interrupt 0, PWM fault input for CCP1 and analog input 12. |
| 19 | RB1/INT1/AN10/C12IN3-/P1C | bidirectional | PORTB digital I/O (weak pull-up option), also external interrupt 1, analog input 10, comparators C1/C2 inverting input and enhanced CCP1 PWM output P1C. |
| 20 | RB2/INT2/AN8/P1B | bidirectional | PORTB digital I/O (weak pull-up option), also external interrupt 2, analog input 8 and enhanced CCP1 PWM output P1B. |
| 21 | RB3/AN9/C12IN2-/CCP2 | bidirectional | PORTB digital I/O (weak pull-up option), also analog input 9, comparators C1/C2 inverting input and alternate CCP2 capture/compare/PWM pin. |
| 22 | RB4/KBI0/AN11/P1D | bidirectional | PORTB digital I/O (weak pull-up option), also interrupt-on-change pin, analog input 11 and enhanced CCP1 PWM output P1D. |
| 23 | RB5/KBI1/PGM | bidirectional | PORTB digital I/O (weak pull-up option), also interrupt-on-change pin and Low-Voltage ICSP programming enable pin. |
| 24 | RB6/KBI2/PGC | bidirectional | PORTB digital I/O (weak pull-up option), also interrupt-on-change pin and In-Circuit Debugger/ICSP programming clock pin. |
| 25 | RB7/KBI3/PGD | bidirectional | PORTB digital I/O (weak pull-up option), also interrupt-on-change pin and In-Circuit Debugger/ICSP programming data pin. |
| 26 | MCLR/VPP/RE3 | input | Active-low Master Clear (device Reset) input, programming voltage input, or digital input RE3 when MCLR is disabled. |
| 27 | RA0/AN0/C12IN0- | bidirectional | PORTA digital I/O with TTL input, also analog input 0 and comparators C1/C2 inverting input. |
| 28 | RA1/AN1/C12IN1- | bidirectional | PORTA digital I/O with TTL input, also analog input 1 and comparators C1/C2 inverting input. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28-EP(6x6) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Voltage | VDD | 1.8 | 3.6 | V | D001 | 353 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | D002 | 353 | ||
| VDD Start Voltage to ensure internal Power-on Reset | VPOR | 0.7 | V | D003 | 353 | ||
| VDD Rise Rate to ensure internal Power-on Reset | SVDD | 0.05 | V/ms | D004 | 353 | ||
| Brown-out Reset Voltage | VBOR | 1.72 | 1.82 | 1.95 | V | BORV<1:0> = 11 | 353 |
| Brown-out Reset Voltage | VBOR | 2.15 | 2.27 | 2.4 | V | BORV<1:0> = 10 | 353 |
| Brown-out Reset Voltage | VBOR | 2.65 | 2.75 | 2.9 | V | BORV<1:0> = 01 | 353 |
| Brown-out Reset Voltage | VBOR | 2.98 | 3.08 | 3.25 | V | BORV<1:0> = 00 | 353 |
| Power-down Current | IPD | 0.05 | 1 | µA | VDD = 1.8V, Sleep mode, -40°C | 353 | |
| Power-down Current | IPD | 0.6 | 3 | µA | VDD = 1.8V, Sleep mode, +85°C | 353 | |
| Power-down Current | IPD | 0.1 | 1 | µA | VDD = 3.0V, Sleep mode, +25°C | 353 | |
| Power-down Current | IPD | 0.7 | 3 | µA | VDD = 3.0V, Sleep mode, +85°C | 353 | |
| Supply Current RC_RUN | IDD | 5.5 | 9 | µA | VDD = 1.8V, FOSC = 31 kHz, RC_RUN, LFINTOSC, -40°C | 354 | |
| Supply Current RC_RUN | IDD | 2.2 | 3 | mA | VDD = 1.8V, FOSC = 16 MHz, RC_RUN, HF-INTOSC, -40°C to +125°C | 354 | |
| Supply Current RC_RUN | IDD | 3.8 | 4.4 | mA | VDD = 3.0V, FOSC = 16 MHz, RC_RUN, HF-INTOSC, -40°C to +125°C | 354 | |
| Supply Current RC_IDLE | IDD | 1 | 1.2 | mA | VDD = 1.8V, FOSC = 16 MHz, RC_IDLE, HF-INTOSC, -40°C to +125°C | 355 | |
| Supply Current RC_IDLE | IDD | 1.6 | 2 | mA | VDD = 3.0V, FOSC = 16 MHz, RC_IDLE, HF-INTOSC, -40°C to +125°C | 355 | |
| Supply Current PRI_RUN | IDD | 4.3 | 5 | mA | VDD = 3.0V, FOSC = 20 MHz, PRI_RUN, EC oscillator, -40°C to +125°C | 356 | |
| Supply Current PRI_RUN | IDD | 12.2 | 14 | mA | VDD = 3.0V, FOSC = 64 MHz, PRI_RUN, EC oscillator, -40°C to +85°C | 356 | |
| Supply Current PRI_IDLE | IDD | 5.6 | 7 | mA | VDD = 3.0V, FOSC = 64 MHz, PRI_IDLE, EC oscillator, -40°C to +85°C | 356 | |
| Watchdog Timer Current | IWDT | 0.7 | 2 | µA | VDD = 1.8V, -40°C to +125°C | 358 | |
| Brown-out Reset Current | IBOR | 21 | 50 | µA | VDD = 2.0V, -40°C to +125°C | 358 | |
| High/Low-Voltage Detect Current | IHLVD | 13 | 30 | µA | VDD = 1.8-3.0V, -40°C to +125°C | 358 | |
| A/D Converter Current | IAD | 260 | 500 | µA | VDD = 3.0V, A/D on, not converting, -40°C to +125°C | 358 | |
| PORTB weak pull-up current | IPURB | 50 | 90 | 400 | µA | VDD = 3.0V, VPIN = VSS | 360 |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 3.0V, -40°C to +85°C | 361 | ||
| Output Low Voltage, OSC2/CLKOUT | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 3.0V, -40°C to +85°C | 361 | ||
| OSC2 pin capacitive loading | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 361 | ||
| All I/O pins and OSC2 capacitive loading | CIO | 50 | pF | To meet the AC Timing Specifications | 361 | ||
| SCL, SDA capacitive loading | CB | 400 | pF | I2C Specification | 361 | ||
| Operating Supply Voltage | VDD | 1.8 | 3.6 | V | VDDMIN 1.8V for Fosc <= 16 MHz; 2.0V for Fosc <= 20 MHz; 3.0V for Fosc <= 64 MHz, Industrial | 351 | |
| Operating Ambient Temperature, Industrial | TA | -40 | 85 | °C | Industrial Temperature | 351 | |
| Ambient temperature under bias | -40 | 125 | °C | 350 | |||
| Storage temperature | -65 | 150 | °C | 350 | |||
| Voltage on pins with respect to VSS (except VDD and MCLR) | -0.3 | V | upper limit printed as VDD + 0.3V | 350 | |||
| Voltage on VDD pin | VDD | -0.3 | 4.5 | V | 350 | ||
| Voltage on MCLR | 0 | 11 | V | 350 | |||
| Total power dissipation | 1 | W | 350 | ||||
| Maximum current out of VSS pin | 350 | mA | -40°C to +85°C for industrial | 350 | |||
| Maximum current into VDD pin | 250 | mA | PIC18F2XK20, -40°C to +85°C for industrial | 350 | |||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 350 | ||
| Maximum output current sunk by any I/O pin | 50 | mA | 350 | ||||
| Maximum output current sourced by any I/O pin | 50 | mA | 350 |
CAD (KiCad official)
- Symbol:
PIC18F25K20T-I - Footprint:
Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm - 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
pic18f25k20t-i-etched.step/pic18f25k20t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f25k20t-i.step/pic18f25k20t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (440 pp, sha256
4e7e234c713a2325, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).