Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18F25K20T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)

PIC18F25K20T-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2/AN2/VREF-/CVREF/C2IN+ bidirectional PORTA digital I/O with TTL input, also analog input 2, ADC low reference input, comparator reference output (CVREF) and comparator C2 non-inverting input.
2 RA3/AN3/VREF+/C1IN+ bidirectional PORTA digital I/O with TTL input, also analog input 3, ADC high reference input and comparator C1 non-inverting input.
3 RA4/T0CKI/C1OUT bidirectional PORTA digital I/O with Schmitt Trigger input, also Timer0 external clock input and comparator C1 output.
4 RA5/AN4/SS/HLVDIN/C2OUT bidirectional PORTA digital I/O with TTL input, also analog input 4, SPI slave select input, High/Low-Voltage Detect input and comparator C2 output.
5 VSS power_in Ground reference for logic and I/O pins.
6 RA7/OSC1/CLKIN bidirectional Oscillator crystal or external clock source input (ST buffer in RC mode, CMOS otherwise), or general purpose I/O pin RA7.
7 RA6/OSC2/CLKOUT bidirectional Oscillator crystal output (or FOSC/4 clock output in RC mode), or general purpose I/O pin RA6.
8 RC0/T1OSO/T13CKI bidirectional PORTC digital I/O with Schmitt Trigger input, also Timer1 oscillator output and Timer1/Timer3 external clock input.
9 RC1/T1OSI/CCP2 bidirectional PORTC digital I/O with Schmitt Trigger input, also Timer1 oscillator input and the default CCP2 capture input/compare output/PWM output.
10 RC2/CCP1/P1A bidirectional PORTC digital I/O with Schmitt Trigger input, also CCP1 capture input/compare output and enhanced CCP1 PWM output P1A.
11 RC3/SCK/SCL bidirectional PORTC digital I/O with Schmitt Trigger input, also synchronous serial clock for SPI (SCK) and I2C (SCL) modes.
12 RC4/SDI/SDA bidirectional PORTC digital I/O with Schmitt Trigger input, also SPI data in (SDI) and I2C data I/O (SDA).
13 RC5/SDO bidirectional PORTC digital I/O with Schmitt Trigger input, also SPI data out (SDO).
14 RC6/TX/CK bidirectional PORTC digital I/O with Schmitt Trigger input, also EUSART asynchronous transmit (TX) and synchronous clock (CK).
15 RC7/RX/DT bidirectional PORTC digital I/O with Schmitt Trigger input, also EUSART asynchronous receive (RX) and synchronous data (DT).
16 VSS power_in Ground reference for logic and I/O pins.
17 VDD power_in Positive supply for logic and I/O pins.
18 RB0/INT0/FLT0/AN12 bidirectional PORTB digital I/O (weak pull-up option), also external interrupt 0, PWM fault input for CCP1 and analog input 12.
19 RB1/INT1/AN10/C12IN3-/P1C bidirectional PORTB digital I/O (weak pull-up option), also external interrupt 1, analog input 10, comparators C1/C2 inverting input and enhanced CCP1 PWM output P1C.
20 RB2/INT2/AN8/P1B bidirectional PORTB digital I/O (weak pull-up option), also external interrupt 2, analog input 8 and enhanced CCP1 PWM output P1B.
21 RB3/AN9/C12IN2-/CCP2 bidirectional PORTB digital I/O (weak pull-up option), also analog input 9, comparators C1/C2 inverting input and alternate CCP2 capture/compare/PWM pin.
22 RB4/KBI0/AN11/P1D bidirectional PORTB digital I/O (weak pull-up option), also interrupt-on-change pin, analog input 11 and enhanced CCP1 PWM output P1D.
23 RB5/KBI1/PGM bidirectional PORTB digital I/O (weak pull-up option), also interrupt-on-change pin and Low-Voltage ICSP programming enable pin.
24 RB6/KBI2/PGC bidirectional PORTB digital I/O (weak pull-up option), also interrupt-on-change pin and In-Circuit Debugger/ICSP programming clock pin.
25 RB7/KBI3/PGD bidirectional PORTB digital I/O (weak pull-up option), also interrupt-on-change pin and In-Circuit Debugger/ICSP programming data pin.
26 MCLR/VPP/RE3 input Active-low Master Clear (device Reset) input, programming voltage input, or digital input RE3 when MCLR is disabled.
27 RA0/AN0/C12IN0- bidirectional PORTA digital I/O with TTL input, also analog input 0 and comparators C1/C2 inverting input.
28 RA1/AN1/C12IN1- bidirectional PORTA digital I/O with TTL input, also analog input 1 and comparators C1/C2 inverting input.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-28-EP(6x6)
Category Single Chip Microcomputer/Microcontroller
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Supply Voltage VDD 1.8 3.6 V D001 353
RAM Data Retention Voltage VDR 1.5 V D002 353
VDD Start Voltage to ensure internal Power-on Reset VPOR 0.7 V D003 353
VDD Rise Rate to ensure internal Power-on Reset SVDD 0.05 V/ms D004 353
Brown-out Reset Voltage VBOR 1.72 1.82 1.95 V BORV<1:0> = 11 353
Brown-out Reset Voltage VBOR 2.15 2.27 2.4 V BORV<1:0> = 10 353
Brown-out Reset Voltage VBOR 2.65 2.75 2.9 V BORV<1:0> = 01 353
Brown-out Reset Voltage VBOR 2.98 3.08 3.25 V BORV<1:0> = 00 353
Power-down Current IPD 0.05 1 µA VDD = 1.8V, Sleep mode, -40°C 353
Power-down Current IPD 0.6 3 µA VDD = 1.8V, Sleep mode, +85°C 353
Power-down Current IPD 0.1 1 µA VDD = 3.0V, Sleep mode, +25°C 353
Power-down Current IPD 0.7 3 µA VDD = 3.0V, Sleep mode, +85°C 353
Supply Current RC_RUN IDD 5.5 9 µA VDD = 1.8V, FOSC = 31 kHz, RC_RUN, LFINTOSC, -40°C 354
Supply Current RC_RUN IDD 2.2 3 mA VDD = 1.8V, FOSC = 16 MHz, RC_RUN, HF-INTOSC, -40°C to +125°C 354
Supply Current RC_RUN IDD 3.8 4.4 mA VDD = 3.0V, FOSC = 16 MHz, RC_RUN, HF-INTOSC, -40°C to +125°C 354
Supply Current RC_IDLE IDD 1 1.2 mA VDD = 1.8V, FOSC = 16 MHz, RC_IDLE, HF-INTOSC, -40°C to +125°C 355
Supply Current RC_IDLE IDD 1.6 2 mA VDD = 3.0V, FOSC = 16 MHz, RC_IDLE, HF-INTOSC, -40°C to +125°C 355
Supply Current PRI_RUN IDD 4.3 5 mA VDD = 3.0V, FOSC = 20 MHz, PRI_RUN, EC oscillator, -40°C to +125°C 356
Supply Current PRI_RUN IDD 12.2 14 mA VDD = 3.0V, FOSC = 64 MHz, PRI_RUN, EC oscillator, -40°C to +85°C 356
Supply Current PRI_IDLE IDD 5.6 7 mA VDD = 3.0V, FOSC = 64 MHz, PRI_IDLE, EC oscillator, -40°C to +85°C 356
Watchdog Timer Current IWDT 0.7 2 µA VDD = 1.8V, -40°C to +125°C 358
Brown-out Reset Current IBOR 21 50 µA VDD = 2.0V, -40°C to +125°C 358
High/Low-Voltage Detect Current IHLVD 13 30 µA VDD = 1.8-3.0V, -40°C to +125°C 358
A/D Converter Current IAD 260 500 µA VDD = 3.0V, A/D on, not converting, -40°C to +125°C 358
PORTB weak pull-up current IPURB 50 90 400 µA VDD = 3.0V, VPIN = VSS 360
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 3.0V, -40°C to +85°C 361
Output Low Voltage, OSC2/CLKOUT VOL 0.6 V IOL = 1.6 mA, VDD = 3.0V, -40°C to +85°C 361
OSC2 pin capacitive loading COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 361
All I/O pins and OSC2 capacitive loading CIO 50 pF To meet the AC Timing Specifications 361
SCL, SDA capacitive loading CB 400 pF I2C Specification 361
Operating Supply Voltage VDD 1.8 3.6 V VDDMIN 1.8V for Fosc <= 16 MHz; 2.0V for Fosc <= 20 MHz; 3.0V for Fosc <= 64 MHz, Industrial 351
Operating Ambient Temperature, Industrial TA -40 85 °C Industrial Temperature 351
Ambient temperature under bias -40 125 °C 350
Storage temperature -65 150 °C 350
Voltage on pins with respect to VSS (except VDD and MCLR) -0.3 V upper limit printed as VDD + 0.3V 350
Voltage on VDD pin VDD -0.3 4.5 V 350
Voltage on MCLR 0 11 V 350
Total power dissipation 1 W 350
Maximum current out of VSS pin 350 mA -40°C to +85°C for industrial 350
Maximum current into VDD pin 250 mA PIC18F2XK20, -40°C to +85°C for industrial 350
Input clamp current IIK 20 mA VI < 0 or VI > VDD 350
Maximum output current sunk by any I/O pin 50 mA 350
Maximum output current sourced by any I/O pin 50 mA 350

CAD (KiCad official)

  • Symbol: PIC18F25K20T-I
  • Footprint: Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm
  • 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: pic18f25k20t-i-etched.step / pic18f25k20t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f25k20t-i.step / pic18f25k20t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (440 pp, sha256 4e7e234c713a2325, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF