3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLF353DT
STMicroelectronics · FET InputAmplifiers · SO-8
LF353DT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of op-amp channel 1. Push-pull output with short-circuit protection; typical short-circuit current 40 mA. |
| 2 | IN1- | input | Inverting input of op-amp channel 1. High-impedance JFET input (~10^12 Ω), typical input bias current 20 pA. |
| 3 | IN1+ | input | Non-inverting input of op-amp channel 1. High-impedance JFET input (~10^12 Ω); common-mode range up to VCC+. |
| 4 | VCC- | power_in | Negative supply rail. Connect to -VCC in dual-supply operation or to GND in single-supply operation. Total VCC range 6-36 V (±3 to ±18 V). |
| 5 | IN2+ | input | Non-inverting input of op-amp channel 2. High-impedance JFET input (~10^12 Ω); common-mode range up to VCC+. |
| 6 | IN2- | input | Inverting input of op-amp channel 2. High-impedance JFET input (~10^12 Ω), typical input bias current 20 pA. |
| 7 | OUT2 | output | Output of op-amp channel 2. Push-pull output with short-circuit protection; typical short-circuit current 40 mA. |
| 8 | VCC+ | power_in | Positive supply rail. Total VCC range 6-36 V (±3 to ±18 V absolute maximum ±18 V per rail). Typical supply current 1.4 mA (no load). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LF353DTDLF353DTLF353DTN
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -18 | 18 | V | 3 | ||
| Input voltage | Vi | -15 | 15 | V | 3 | ||
| Differential input voltage | Vid | -30 | 30 | V | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| ESD HBM (human body model) | 1 | kV | 3 | ||||
| ESD MM (machine model) | 200 | V | 3 | ||||
| ESD CDM (charged device model) | 1.5 | kV | 3 | ||||
| Supply voltage | VCC | 6 | 36 | V | 3 | ||
| Operating free-air temperature range (LF353) | Toper | 0 | 70 | °C | 3 | ||
| Thermal resistance junction to ambient, SO-8 | Rthja | 125 | °C/W | SO-8 package | 3 | ||
| Thermal resistance junction to case, SO-8 | Rthjc | 40 | °C/W | SO-8 package | 3 | ||
| Input offset voltage | Vio | 3 | 10 | mV | Rs = 10kΩ | 4 | |
| Input offset voltage | Vio | 13 | mV | Rs = 10kΩ, Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Input offset current | Iio | 5 | 100 | pA | 4 | ||
| Input offset current | Iio | 4 | nA | Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Input bias current | Iib | 20 | 200 | pA | 4 | ||
| Input bias current | Iib | 20 | nA | Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Large signal voltage gain | Avd | 50 | 200 | V/mV | RL = 2kΩ, Vo = ±10V | 4 | |
| Large signal voltage gain | Avd | 25 | V/mV | RL = 2kΩ, Vo = ±10V, Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Supply voltage rejection ratio | SVR | 80 | 86 | dB | RS = 10kΩ | 4 | |
| Supply voltage rejection ratio | SVR | 80 | dB | RS = 10kΩ, Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Supply current, no load | ICC | 1.4 | 3.2 | mA | 4 | ||
| Supply current, no load | ICC | 3.2 | mA | Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Input common mode voltage range | Vicm | -12 | 15 | V | 4 | ||
| Common mode rejection ratio | CMR | 70 | 86 | dB | RS = 10kΩ | 4 | |
| Common mode rejection ratio | CMR | 70 | dB | RS = 10kΩ, Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Output short-circuit current | IOS | 10 | 40 | 60 | mA | 4 | |
| Output short-circuit current | IOS | 10 | 60 | mA | Tmin ≤ Tamb ≤ Tmax | 4 | |
| Slew rate | SR | 12 | 16 | V/µs | Vi = 10V, RL = 2kΩ, CL = 100pF, unity gain | 4 | |
| Gain bandwidth product | GBP | 2.5 | 4 | MHz | f = 100kHz, Vin = 10mV, RL = 2kΩ, CL = 100pF | 4 | |
| Input offset voltage drift | DVio | 10 | µV/°C | 4 | |||
| Rise time | tr | 0.1 | µs | Vi = 20mV, RL = 2kΩ, CL = 100pF, unity gain | 4 | ||
| Overshoot | Kov | 10 | % | Vi = 20mV, RL = 2kΩ, CL = 100pF, unity gain | 4 | ||
| Input resistance | Ri | 1012 | Ω | 4 | |||
| Total harmonic distortion | THD | 0.01 | % | f= 1kHz, Av= 20dB, RL= 2kΩ, CL=100pF, Vo= 2Vpp | 4 | ||
| Equivalent input noise voltage | en | 15 | nV/√Hz | RS = 100Ω, f = 1KHz | 4 | ||
| Phase margin | ∅m | 45 | Degrees | 4 | |||
| Channel separation | Vo1/Vo2 | 120 | dB | Av = 100 | 4 |
CAD (KiCad official)
- Symbol:
LF353DT - Footprint:
Package_SO:TI_SO-PowerPAD-8 - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lf353dt-etched.step/lf353dt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lf353dt.step/lf353dt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (15 pp, sha256
ceac07779b59e65c, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).