main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs lf353dt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lf353dt: viewers · Ray
lf353dt-etched.fit.json lf353dt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lf353dt-etched.glb lf353dt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lf353dt-etched.step lf353dt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lf353dt.glb Publish 0.1.0 · Ray
lf353dt.kicad_mod Publish 0.1.0 · Ray
lf353dt.kicad_sym Publish 0.1.0 · Ray
lf353dt.lbr Publish 0.1.0 · Ray
lf353dt.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json lf353dt: specified limits as data (metadata.characteristics, 38 rows from the datasheet) · Ray
README.md lf353dt: specified limits as data (metadata.characteristics, 38 rows from the datasheet) · Ray

LF353DT

STMicroelectronics · FET InputAmplifiers · SO-8

LF353DT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of op-amp channel 1. Push-pull output with short-circuit protection; typical short-circuit current 40 mA.
2 IN1- input Inverting input of op-amp channel 1. High-impedance JFET input (~10^12 Ω), typical input bias current 20 pA.
3 IN1+ input Non-inverting input of op-amp channel 1. High-impedance JFET input (~10^12 Ω); common-mode range up to VCC+.
4 VCC- power_in Negative supply rail. Connect to -VCC in dual-supply operation or to GND in single-supply operation. Total VCC range 6-36 V (±3 to ±18 V).
5 IN2+ input Non-inverting input of op-amp channel 2. High-impedance JFET input (~10^12 Ω); common-mode range up to VCC+.
6 IN2- input Inverting input of op-amp channel 2. High-impedance JFET input (~10^12 Ω), typical input bias current 20 pA.
7 OUT2 output Output of op-amp channel 2. Push-pull output with short-circuit protection; typical short-circuit current 40 mA.
8 VCC+ power_in Positive supply rail. Total VCC range 6-36 V (±3 to ±18 V absolute maximum ±18 V per rail). Typical supply current 1.4 mA (no load).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LF353DTD
  • LF353DT
  • LF353DTN

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC -18 18 V 3
Input voltage Vi -15 15 V 3
Differential input voltage Vid -30 30 V 3
Storage temperature range Tstg -65 150 °C 3
ESD HBM (human body model) 1 kV 3
ESD MM (machine model) 200 V 3
ESD CDM (charged device model) 1.5 kV 3
Supply voltage VCC 6 36 V 3
Operating free-air temperature range (LF353) Toper 0 70 °C 3
Thermal resistance junction to ambient, SO-8 Rthja 125 °C/W SO-8 package 3
Thermal resistance junction to case, SO-8 Rthjc 40 °C/W SO-8 package 3
Input offset voltage Vio 3 10 mV Rs = 10kΩ 4
Input offset voltage Vio 13 mV Rs = 10kΩ, Tmin ≤ Tamb ≤ Tmax 4
Input offset current Iio 5 100 pA 4
Input offset current Iio 4 nA Tmin ≤ Tamb ≤ Tmax 4
Input bias current Iib 20 200 pA 4
Input bias current Iib 20 nA Tmin ≤ Tamb ≤ Tmax 4
Large signal voltage gain Avd 50 200 V/mV RL = 2kΩ, Vo = ±10V 4
Large signal voltage gain Avd 25 V/mV RL = 2kΩ, Vo = ±10V, Tmin ≤ Tamb ≤ Tmax 4
Supply voltage rejection ratio SVR 80 86 dB RS = 10kΩ 4
Supply voltage rejection ratio SVR 80 dB RS = 10kΩ, Tmin ≤ Tamb ≤ Tmax 4
Supply current, no load ICC 1.4 3.2 mA 4
Supply current, no load ICC 3.2 mA Tmin ≤ Tamb ≤ Tmax 4
Input common mode voltage range Vicm -12 15 V 4
Common mode rejection ratio CMR 70 86 dB RS = 10kΩ 4
Common mode rejection ratio CMR 70 dB RS = 10kΩ, Tmin ≤ Tamb ≤ Tmax 4
Output short-circuit current IOS 10 40 60 mA 4
Output short-circuit current IOS 10 60 mA Tmin ≤ Tamb ≤ Tmax 4
Slew rate SR 12 16 V/µs Vi = 10V, RL = 2kΩ, CL = 100pF, unity gain 4
Gain bandwidth product GBP 2.5 4 MHz f = 100kHz, Vin = 10mV, RL = 2kΩ, CL = 100pF 4
Input offset voltage drift DVio 10 µV/°C 4
Rise time tr 0.1 µs Vi = 20mV, RL = 2kΩ, CL = 100pF, unity gain 4
Overshoot Kov 10 % Vi = 20mV, RL = 2kΩ, CL = 100pF, unity gain 4
Input resistance Ri 1012 Ω 4
Total harmonic distortion THD 0.01 % f= 1kHz, Av= 20dB, RL= 2kΩ, CL=100pF, Vo= 2Vpp 4
Equivalent input noise voltage en 15 nV/√Hz RS = 100Ω, f = 1KHz 4
Phase margin ∅m 45 Degrees 4
Channel separation Vo1/Vo2 120 dB Av = 100 4

CAD (KiCad official)

  • Symbol: LF353DT
  • Footprint: Package_SO:TI_SO-PowerPAD-8
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lf353dt-etched.step / lf353dt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lf353dt.step / lf353dt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (15 pp, sha256 ceac07779b59e65c, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF