3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRTQ2943GSP-QA
Richtek Tech · DC-DC Converters · SOP-8-EP
RTQ2943GSP-QA from Richtek Tech, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | power_out | Bootstrap capacitor connection node supplying the high-side gate driver, with a ceramic capacitor connected between this pin and SW. |
| 2 | VIN | power_in | Power input with an input voltage range of 4V to 42V, decoupled to GND with ceramic input capacitors. |
| 3 | EN | input | Enable control with internal pull-up current source; floating or a logic-high (1.2V) enables the converter, and a logic-low forces shutdown mode. |
| 4 | RT/SYNC | input | Frequency setting resistor connection to GND and external clock input for synchronization to an external frequency. |
| 5 | FB | input | Output voltage sense input through a resistive divider, with a feedback reference voltage of 0.8V typically. |
| 6 | COMP | passive | Compensation node for external compensation elements that stabilize the control loop. |
| 7 | GND | power_in | Ground return path for the control circuitry. |
| 8 | SW | output | Switch node supplying power to the output, with the output LC filter connected from SW to the load. |
| 9 | PAD | passive | Exposed pad, internally unconnected, that must be soldered to a large PCB copper area for maximum power dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | SOP-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Under-Voltage Lockout Threshold, VIN rising | VUVLOH | 4.1 | 4.3 | 4.5 | V | VIN rising | 12 |
| Under-Voltage Lockout Threshold, VIN falling | VUVLOL | 3.8 | 3.9 | 4 | V | VIN falling | 12 |
| Shutdown Current | ISHDN | 2.25 | 5 | A | VEN = 0V | 12 | |
| Quiescent Current | IQ | 100 | 135 | A | VEN = 2V, VFB = 0.83V, not switching | 12 | |
| Enable Threshold Voltage | VTH_EN | 1.1 | 1.2 | 1.3 | V | 12 | |
| Pull-Up Current | IEN | 0.58 | 1.2 | 1.8 | A | VTH_EN - 50mV | 12 |
| Hysteresis Current | IEN_Hys | 2.2 | 3.4 | 4.5 | A | 12 | |
| Reference Voltage | VREF | 0.792 | 0.8 | 0.808 | V | 12 | |
| High-Side Switch On-Resistance | RDS(ON)_H | 80 | 150 | mΩ | VIN = 12V, VBOOT VSW = 5V | 12 | |
| Current Limit | ILIM | 4.675 | 5.5 | 6.325 | A | fSW = 500kHz, VOUT = 5V | 12 |
| Minimum On-Time | tON_MIN | 120 | 135 | ns | IOUT = 1A | 13 | |
| Switching Frequency 1 | fSW1 | 90 | 105 | 120 | kHz | RRT/SYNC = 1M | 13 |
| Switching Frequency 2 | fSW2 | 450 | 500 | 550 | kHz | RRT/SYNC = 200k | 13 |
| Switching Frequency 3 | fSW3 | 2200 | 2450 | 2700 | kHz | RRT/SYNC = 37.4k | 13 |
| SYNC Frequency Range | 0.3 | 2.2 | MHz | External clock | 13 | ||
| SYNC Threshold Voltage high | VIH_SYNC | 1.55 | 2 | V | 13 | ||
| SYNC Threshold Voltage low | VIL_SYNC | 0.5 | 1.2 | V | 13 | ||
| Soft-Start Period | 1.4 | 2 | 2.6 | ms | 10% to 90%, RTQ2943GSP | 13 | |
| Supply Input Voltage | VIN | 4 | 42 | V | 11 | ||
| Output Voltage | VOUT | 0.8 | V | 0.8V to VIN | 11 | ||
| Junction Temperature Range | TJ | -40 | 150 | °C | 11 | ||
| Supply Voltage | VIN | -0.3 | 45 | V | 11 | ||
| Enable Voltage | EN | -0.3 | 45 | V | 11 | ||
| Switch Voltage | SW | -0.6 | 45 | V | 11 | ||
| Switch Voltage (transient) | SW | -5 | 50 | V | t ≤ 100ns | 11 | |
| Switch Voltage (transient) | SW | -7 | 70 | V | t ≤ 5ns | 11 | |
| Power Good Voltage | PGOOD | -0.3 | 45 | V | 11 | ||
| BOOT to SW voltage | BOOT-SW | -0.3 | 6 | V | 11 | ||
| All Other Pins Voltage | -0.3 | 6 | V | 11 | |||
| Lead Temperature | 260 | °C | Soldering, 10 sec. | 11 | |||
| Junction Temperature | TJ | 150 | °C | 11 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 11 | ||
| Junction-to-ambient thermal resistance (JEDEC standard) | JA | 30.4 | C/W | SOP-8 (Exposed pad), JEDEC standard | 11 | ||
| Junction-to-case (top) thermal resistance | JC(Top) | 73.9 | C/W | SOP-8 (Exposed pad) | 11 | ||
| Junction-to-case (bottom) thermal resistance | JC(Bottom) | 3.4 | C/W | SOP-8 (Exposed pad) | 11 | ||
| Junction-to-ambient thermal resistance (specific EVB) | JA(EVB) | 30 | C/W | SOP-8 (Exposed pad), specific EVB | 11 | ||
| Junction-to-top characterization parameter | JC(Top) | 5 | C/W | SOP-8 (Exposed pad), characterization parameter | 11 | ||
| Junction-to-board characterization parameter | JB | 13.2 | C/W | SOP-8 (Exposed pad), characterization parameter | 11 |
CAD (KiCad official)
- Symbol:
RTQ2943GSP-QA - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
rtq2943gsp-qa-etched.step/rtq2943gsp-qa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rtq2943gsp-qa.step/rtq2943gsp-qa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (37 pp, sha256
a2f9db93c5770ec4, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).