Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RTQ2943GSP-QA

Richtek Tech · DC-DC Converters · SOP-8-EP

RTQ2943GSP-QA from Richtek Tech, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT power_out Bootstrap capacitor connection node supplying the high-side gate driver, with a ceramic capacitor connected between this pin and SW.
2 VIN power_in Power input with an input voltage range of 4V to 42V, decoupled to GND with ceramic input capacitors.
3 EN input Enable control with internal pull-up current source; floating or a logic-high (1.2V) enables the converter, and a logic-low forces shutdown mode.
4 RT/SYNC input Frequency setting resistor connection to GND and external clock input for synchronization to an external frequency.
5 FB input Output voltage sense input through a resistive divider, with a feedback reference voltage of 0.8V typically.
6 COMP passive Compensation node for external compensation elements that stabilize the control loop.
7 GND power_in Ground return path for the control circuitry.
8 SW output Switch node supplying power to the output, with the output LC filter connected from SW to the load.
9 PAD passive Exposed pad, internally unconnected, that must be soldered to a large PCB copper area for maximum power dissipation.

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package SOP-8-EP
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Under-Voltage Lockout Threshold, VIN rising VUVLOH 4.1 4.3 4.5 V VIN rising 12
Under-Voltage Lockout Threshold, VIN falling VUVLOL 3.8 3.9 4 V VIN falling 12
Shutdown Current ISHDN 2.25 5 A VEN = 0V 12
Quiescent Current IQ 100 135 A VEN = 2V, VFB = 0.83V, not switching 12
Enable Threshold Voltage VTH_EN 1.1 1.2 1.3 V 12
Pull-Up Current IEN 0.58 1.2 1.8 A VTH_EN - 50mV 12
Hysteresis Current IEN_Hys 2.2 3.4 4.5 A 12
Reference Voltage VREF 0.792 0.8 0.808 V 12
High-Side Switch On-Resistance RDS(ON)_H 80 150 mΩ VIN = 12V, VBOOT VSW = 5V 12
Current Limit ILIM 4.675 5.5 6.325 A fSW = 500kHz, VOUT = 5V 12
Minimum On-Time tON_MIN 120 135 ns IOUT = 1A 13
Switching Frequency 1 fSW1 90 105 120 kHz RRT/SYNC = 1M 13
Switching Frequency 2 fSW2 450 500 550 kHz RRT/SYNC = 200k 13
Switching Frequency 3 fSW3 2200 2450 2700 kHz RRT/SYNC = 37.4k 13
SYNC Frequency Range 0.3 2.2 MHz External clock 13
SYNC Threshold Voltage high VIH_SYNC 1.55 2 V 13
SYNC Threshold Voltage low VIL_SYNC 0.5 1.2 V 13
Soft-Start Period 1.4 2 2.6 ms 10% to 90%, RTQ2943GSP 13
Supply Input Voltage VIN 4 42 V 11
Output Voltage VOUT 0.8 V 0.8V to VIN 11
Junction Temperature Range TJ -40 150 °C 11
Supply Voltage VIN -0.3 45 V 11
Enable Voltage EN -0.3 45 V 11
Switch Voltage SW -0.6 45 V 11
Switch Voltage (transient) SW -5 50 V t ≤ 100ns 11
Switch Voltage (transient) SW -7 70 V t ≤ 5ns 11
Power Good Voltage PGOOD -0.3 45 V 11
BOOT to SW voltage BOOT-SW -0.3 6 V 11
All Other Pins Voltage -0.3 6 V 11
Lead Temperature 260 °C Soldering, 10 sec. 11
Junction Temperature TJ 150 °C 11
Storage Temperature Range TSTG -65 150 °C 11
Junction-to-ambient thermal resistance (JEDEC standard) JA 30.4 C/W SOP-8 (Exposed pad), JEDEC standard 11
Junction-to-case (top) thermal resistance JC(Top) 73.9 C/W SOP-8 (Exposed pad) 11
Junction-to-case (bottom) thermal resistance JC(Bottom) 3.4 C/W SOP-8 (Exposed pad) 11
Junction-to-ambient thermal resistance (specific EVB) JA(EVB) 30 C/W SOP-8 (Exposed pad), specific EVB 11
Junction-to-top characterization parameter JC(Top) 5 C/W SOP-8 (Exposed pad), characterization parameter 11
Junction-to-board characterization parameter JB 13.2 C/W SOP-8 (Exposed pad), characterization parameter 11

CAD (KiCad official)

  • Symbol: RTQ2943GSP-QA
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: rtq2943gsp-qa-etched.step / rtq2943gsp-qa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rtq2943gsp-qa.step / rtq2943gsp-qa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (37 pp, sha256 a2f9db93c5770ec4, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF