3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLTC1386CS#PBF
Analog Devices · RS-485/RS-422 ICs · SO-16
LTC1386CS#PBF from Analog Devices, in a SO-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Commutating capacitor input; a 0.1µF capacitor connects from C1+ to C1-, and its effective series resistance should be less than 2Ω to maintain charge pump efficiency. |
| 2 | V+ | power_out | Positive supply output for EIA/TIA562 drivers, stated as V+ ≅ 2VCC - 1V, requiring an external 0.1µF charge storage capacitor. |
| 3 | C1- | passive | Commutating capacitor input; a 0.1µF capacitor connects from C1+ to C1-, and its effective series resistance should be less than 2Ω to maintain charge pump efficiency. |
| 4 | C2+ | passive | Commutating capacitor input; a 0.1µF capacitor connects from C2+ to C2-, and its effective series resistance should be less than 2Ω to maintain charge pump efficiency. |
| 5 | C2- | passive | Commutating capacitor input; a 0.1µF capacitor connects from C2+ to C2-, and its effective series resistance should be less than 2Ω to maintain charge pump efficiency. |
| 6 | V- | power_out | Negative supply output for RS232 drivers, stated as V- ≅ -(2VCC - 1.3V), requiring an external 0.1µF charge storage capacitor. |
| 7 | TR2 OUT | output | Driver output at EIA/TIA562 voltage levels, protected against ESD to ±10kV for human body model discharges. |
| 8 | RX2 IN | input | Receiver input that can be forced to ±25V without damage, protected against ESD to ±10kV human body model, providing 0.4V of hysteresis. |
| 9 | RX2 OUT | output | Receiver output with TTL/CMOS voltage levels. |
| 10 | TR2 IN | input | Driver input, TTL/CMOS compatible, with an on-chip 300k pull-up to VCC so an unused driver input can be left unconnected. |
| 11 | TR1 IN | input | Driver input, TTL/CMOS compatible, with an on-chip 300k pull-up to VCC so an unused driver input can be left unconnected. |
| 12 | RX1 OUT | output | Receiver output with TTL/CMOS voltage levels. |
| 13 | RX1 IN | input | Receiver input that can be forced to ±25V without damage, protected against ESD to ±10kV human body model, providing 0.4V of hysteresis. |
| 14 | TR1 OUT | output | Driver output at EIA/TIA562 voltage levels, protected against ESD to ±10kV for human body model discharges. |
| 15 | GND | power_in | Ground pin. |
| 16 | VCC | power_in | 3.3V input supply pin, to be decoupled with a 0.1µF ceramic capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-16 |
| Category | Communication Interface Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC | VCC | 5 | V | 2 | |||
| Driver input voltage | -0.3 | V | Upper limit VCC+0.3V | 2 | |||
| Receiver input voltage | -25 | 25 | V | 2 | |||
| Digital input voltage | -0.3 | V | Upper limit VCC+0.3V | 2 | |||
| Driver output voltage | -25 | 25 | V | 2 | |||
| Receiver output voltage | -0.3 | V | Upper limit VCC+0.3V | 2 | |||
| Short-circuit duration V+ | 30 | sec | 2 | ||||
| Short-circuit duration V- | 30 | sec | 2 | ||||
| Storage temperature range | -65 | 150 | °C | 2 | |||
| Lead temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Operating temperature range LTC1386C | 0 | 70 | °C | 2 | |||
| Maximum junction temperature | TJMAX | 125 | °C | 2 | |||
| Thermal resistance junction to ambient | θJA | 95 | °C/W | 2 | |||
| Driver output voltage swing positive | 3.7 | 4.5 | V | 3k to GND, positive; full operating temperature range | 2 | ||
| Driver output voltage swing negative | -4.5 | -3.7 | V | 3k to GND, negative; full operating temperature range | 2 | ||
| Logic input low level | 0.8 | V | VOUT = High; full operating temperature range | 2 | |||
| Logic input high level | 2 | V | VOUT = Low; full operating temperature range | 2 | |||
| Logic input current high | 5 | µA | VIN = VCC; full operating temperature range | 2 | |||
| Logic input current low | -40 | -20 | µA | VIN = 0V; full operating temperature range | 2 | ||
| Driver output short-circuit current | -10 | 10 | mA | VOUT = 0V | 2 | ||
| Receiver input low threshold | 0.8 | 1.3 | V | Full operating temperature range | 2 | ||
| Receiver input high threshold | 1.7 | 2.4 | V | Full operating temperature range | 2 | ||
| Receiver input hysteresis | 0.1 | 0.4 | 1 | V | Full operating temperature range | 2 | |
| Receiver input resistance | 3 | 5 | 7 | kΩ | -10V ≤ VIN ≤ 10V | 2 | |
| Receiver output low voltage | 0.2 | 0.4 | V | IOUT = -1.6mA (VCC = 3.3V); full operating temperature range | 2 | ||
| Receiver output high voltage | 3 | 3.2 | V | IOUT = 160µA (VCC = 3.3V); full operating temperature range | 2 | ||
| Receiver output short-circuit sinking current | -20 | -5 | mA | VOUT = VCC | 2 | ||
| Receiver output short-circuit sourcing current | 2 | 7 | mA | VOUT = GND | 2 | ||
| V+ output voltage | 5.7 | V | IOUT = 0mA | 2 | |||
| V+ output voltage | 5.5 | V | IOUT = 5mA | 2 | |||
| V- output voltage | -5.3 | V | IOUT = 0mA | 2 | |||
| V- output voltage | -5 | V | IOUT = -5mA | 2 | |||
| VCC supply current | ICC | 0.2 | 0.5 | mA | No load (Note 2), 0°C to 70°C | 2 | |
| Slew rate | 8 | 30 | V/µs | RL = 3k, CL = 51pF | 3 | ||
| Slew rate | 3 | 5 | V/µs | RL = 3k, CL = 1000pF | 3 | ||
| Driver propagation delay tHLD | tHLD | 2 | 3.5 | µs | Figure 1; full operating temperature range | 3 | |
| Driver propagation delay tLHD | tLHD | 2 | 3.5 | µs | Figure 1; full operating temperature range | 3 | |
| Receiver propagation delay tHLR | tHLR | 0.3 | 0.8 | µs | Figure 2; full operating temperature range | 3 | |
| Receiver propagation delay tLHR | tLHR | 0.3 | 0.8 | µs | Figure 2; full operating temperature range | 3 |
CAD (KiCad official)
- Symbol:
LTC1386CS#PBF - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SO-16 (KiCad packages3D, STEP)
- 3D model files:
ltc1386cs-pbf-etched.step/ltc1386cs-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc1386cs-pbf.step/ltc1386cs-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (8 pp, sha256
ab966ca8508de92a, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).