main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ltc1386cs-pbf: viewers · Ray
ltc1386cs-pbf-etched.glb Publish 0.1.0 · Ray
ltc1386cs-pbf-etched.step ltc1386cs-pbf: factory component page (tier=mfr) · Ray
ltc1386cs-pbf-hero.glb ltc1386cs-pbf: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc1386cs-pbf-hero.overlay.json Publish 0.1.0 · Ray
ltc1386cs-pbf.glb Publish 0.1.0 · Ray
ltc1386cs-pbf.kicad_mod Publish 0.1.0 · Ray
ltc1386cs-pbf.kicad_sym Publish 0.1.0 · Ray
ltc1386cs-pbf.lbr Publish 0.1.0 · Ray
ltc1386cs-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LTC1386CS#PBF

Analog Devices · RS-485/RS-422 ICs · SO-16

LTC1386CS#PBF from Analog Devices, in a SO-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Commutating capacitor input; a 0.1µF capacitor connects from C1+ to C1-, and its effective series resistance should be less than 2Ω to maintain charge pump efficiency.
2 V+ power_out Positive supply output for EIA/TIA562 drivers, stated as V+ ≅ 2VCC - 1V, requiring an external 0.1µF charge storage capacitor.
3 C1- passive Commutating capacitor input; a 0.1µF capacitor connects from C1+ to C1-, and its effective series resistance should be less than 2Ω to maintain charge pump efficiency.
4 C2+ passive Commutating capacitor input; a 0.1µF capacitor connects from C2+ to C2-, and its effective series resistance should be less than 2Ω to maintain charge pump efficiency.
5 C2- passive Commutating capacitor input; a 0.1µF capacitor connects from C2+ to C2-, and its effective series resistance should be less than 2Ω to maintain charge pump efficiency.
6 V- power_out Negative supply output for RS232 drivers, stated as V- ≅ -(2VCC - 1.3V), requiring an external 0.1µF charge storage capacitor.
7 TR2 OUT output Driver output at EIA/TIA562 voltage levels, protected against ESD to ±10kV for human body model discharges.
8 RX2 IN input Receiver input that can be forced to ±25V without damage, protected against ESD to ±10kV human body model, providing 0.4V of hysteresis.
9 RX2 OUT output Receiver output with TTL/CMOS voltage levels.
10 TR2 IN input Driver input, TTL/CMOS compatible, with an on-chip 300k pull-up to VCC so an unused driver input can be left unconnected.
11 TR1 IN input Driver input, TTL/CMOS compatible, with an on-chip 300k pull-up to VCC so an unused driver input can be left unconnected.
12 RX1 OUT output Receiver output with TTL/CMOS voltage levels.
13 RX1 IN input Receiver input that can be forced to ±25V without damage, protected against ESD to ±10kV human body model, providing 0.4V of hysteresis.
14 TR1 OUT output Driver output at EIA/TIA562 voltage levels, protected against ESD to ±10kV for human body model discharges.
15 GND power_in Ground pin.
16 VCC power_in 3.3V input supply pin, to be decoupled with a 0.1µF ceramic capacitor.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SO-16
Category Communication Interface Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC VCC 5 V 2
Driver input voltage -0.3 V Upper limit VCC+0.3V 2
Receiver input voltage -25 25 V 2
Digital input voltage -0.3 V Upper limit VCC+0.3V 2
Driver output voltage -25 25 V 2
Receiver output voltage -0.3 V Upper limit VCC+0.3V 2
Short-circuit duration V+ 30 sec 2
Short-circuit duration V- 30 sec 2
Storage temperature range -65 150 °C 2
Lead temperature 300 °C Soldering, 10 sec 2
Operating temperature range LTC1386C 0 70 °C 2
Maximum junction temperature TJMAX 125 °C 2
Thermal resistance junction to ambient θJA 95 °C/W 2
Driver output voltage swing positive 3.7 4.5 V 3k to GND, positive; full operating temperature range 2
Driver output voltage swing negative -4.5 -3.7 V 3k to GND, negative; full operating temperature range 2
Logic input low level 0.8 V VOUT = High; full operating temperature range 2
Logic input high level 2 V VOUT = Low; full operating temperature range 2
Logic input current high 5 µA VIN = VCC; full operating temperature range 2
Logic input current low -40 -20 µA VIN = 0V; full operating temperature range 2
Driver output short-circuit current -10 10 mA VOUT = 0V 2
Receiver input low threshold 0.8 1.3 V Full operating temperature range 2
Receiver input high threshold 1.7 2.4 V Full operating temperature range 2
Receiver input hysteresis 0.1 0.4 1 V Full operating temperature range 2
Receiver input resistance 3 5 7 kΩ -10V ≤ VIN ≤ 10V 2
Receiver output low voltage 0.2 0.4 V IOUT = -1.6mA (VCC = 3.3V); full operating temperature range 2
Receiver output high voltage 3 3.2 V IOUT = 160µA (VCC = 3.3V); full operating temperature range 2
Receiver output short-circuit sinking current -20 -5 mA VOUT = VCC 2
Receiver output short-circuit sourcing current 2 7 mA VOUT = GND 2
V+ output voltage 5.7 V IOUT = 0mA 2
V+ output voltage 5.5 V IOUT = 5mA 2
V- output voltage -5.3 V IOUT = 0mA 2
V- output voltage -5 V IOUT = -5mA 2
VCC supply current ICC 0.2 0.5 mA No load (Note 2), 0°C to 70°C 2
Slew rate 8 30 V/µs RL = 3k, CL = 51pF 3
Slew rate 3 5 V/µs RL = 3k, CL = 1000pF 3
Driver propagation delay tHLD tHLD 2 3.5 µs Figure 1; full operating temperature range 3
Driver propagation delay tLHD tLHD 2 3.5 µs Figure 1; full operating temperature range 3
Receiver propagation delay tHLR tHLR 0.3 0.8 µs Figure 2; full operating temperature range 3
Receiver propagation delay tLHR tLHR 0.3 0.8 µs Figure 2; full operating temperature range 3

CAD (KiCad official)

  • Symbol: LTC1386CS#PBF
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SO-16 (KiCad packages3D, STEP)
  • 3D model files: ltc1386cs-pbf-etched.step / ltc1386cs-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc1386cs-pbf.step / ltc1386cs-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (8 pp, sha256 ab966ca8508de92a, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF