component
PIC18F6680-I/PT
Public Made by Adomby adom
Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), TQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F6680-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC18F6680-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE1/WR/AD9 | bidirectional | Digital I/O (ST input) that serves as the Parallel Slave Port write control (see CS and RD pins) when PSP is enabled. |
| 2 | RE0/RD/AD8 | bidirectional | Digital I/O (ST input) that serves as the Parallel Slave Port read control (see WR and CS pins) when PSP is enabled. |
| 3 | RG0/CANTX1 | bidirectional | Digital I/O (ST input) that serves as the CAN bus transmit 1 output. |
| 4 | RG1/CANTX2 | bidirectional | Digital I/O (ST input) that serves as the CAN bus transmit 2 output. |
| 5 | RG2/CANRX | bidirectional | Digital I/O (ST input) that serves as the CAN bus receive input. |
| 6 | RG3 | bidirectional | General purpose digital I/O with Schmitt Trigger input buffer. |
| 7 | RG5/MCLR/VPP | input | Active-low Master Clear (Reset) input to the device, or programming voltage input; RG5 alone is a general purpose input-only pin. |
| 8 | RG4/P1D | bidirectional | Digital I/O (ST input) that also serves as ECCP1 PWM output D. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDD | power_in | Positive supply for logic and I/O pins; device operating range is stated as 2.0V to 5.5V. |
| 11 | RF7/SS | bidirectional | Digital I/O (ST input) that serves as the SPI slave select input (TTL). |
| 12 | RF6/AN11/C1IN- | bidirectional | Digital I/O (ST input) that serves as analog input 11 and comparator 1 input (-). |
| 13 | RF5/AN10/C1IN+/CVREF | bidirectional | Digital I/O (ST input) that serves as analog input 10, comparator 1 input (+), and comparator voltage reference output (CVREF). |
| 14 | RF4/AN9/C2IN- | bidirectional | Digital I/O (ST input) that serves as analog input 9 and comparator 2 input (-). |
| 15 | RF3/AN8/C2IN+ | bidirectional | Digital I/O (ST input) that serves as analog input 8 and comparator 2 input (+). |
| 16 | RF2/AN7/C1OUT | bidirectional | Digital I/O (ST input) that serves as analog input 7 and comparator 1 output. |
| 17 | RF1/AN6/C2OUT | bidirectional | Digital I/O (ST input) that serves as analog input 6 and comparator 2 output. |
| 18 | RF0/AN5 | bidirectional | Digital I/O (ST input) that serves as analog input 5. |
| 19 | AVDD | power_in | Positive supply for analog modules. |
| 20 | AVSS | power_in | Ground reference for analog modules. |
| 21 | RA3/AN3/VREF+ | bidirectional | Digital I/O (TTL) that serves as analog input 3 and the A/D reference voltage (high) input. |
| 22 | RA2/AN2/VREF- | bidirectional | Digital I/O (TTL) that serves as analog input 2 and the A/D reference voltage (low) input. |
| 23 | RA1/AN1 | bidirectional | Digital I/O (TTL) that serves as analog input 1. |
| 24 | RA0/AN0 | bidirectional | Digital I/O (TTL) that serves as analog input 0. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for logic and I/O pins; device operating range is stated as 2.0V to 5.5V. |
| 27 | RA5/AN4/LVDIN | bidirectional | Digital I/O (TTL) that serves as analog input 4 and the low-voltage detect input (LVDIN). |
| 28 | RA4/T0CKI | bidirectional | Digital I/O (Schmitt Trigger input, open-drain when configured as output) that serves as the Timer0 external clock input. |
| 29 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O (ST input) that serves as Timer1 oscillator input and CCP2 capture input/compare output/PWM 2 output, depending on CCP2MX setting. |
| 30 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O (ST input) that serves as Timer1 oscillator output and Timer1/Timer3 external clock input. |
| 31 | RC6/TX/CK | bidirectional | Digital I/O (ST input) that serves as USART asynchronous transmit output or USART synchronous clock. |
| 32 | RC7/RX/DT | bidirectional | Digital I/O (ST input) that serves as USART asynchronous receive input or USART synchronous data. |
| 33 | RC2/CCP1/P1A | bidirectional | Digital I/O (ST input) that serves as CCP1 capture input/compare output and CCP1 PWM output A. |
| 34 | RC3/SCK/SCL | bidirectional | Digital I/O (ST input) that serves as synchronous serial clock input/output for SPI mode and I2C mode (SCL). |
| 35 | RC4/SDI/SDA | bidirectional | Digital I/O (ST input) that serves as SPI data input and I2C data I/O (SDA). |
| 36 | RC5/SDO | bidirectional | Digital I/O (ST input) that serves as SPI data output. |
| 37 | RB7/KBI3/PGD | bidirectional | Digital I/O (TTL input) with interrupt-on-change, and serves as in-circuit debugger and ICSP programming data. |
| 38 | VDD | power_in | Positive supply for logic and I/O pins; device operating range is stated as 2.0V to 5.5V. |
| 39 | OSC1/CLKI | input | Oscillator crystal input or external clock source input (CMOS; ST buffer when configured in RC mode). |
| 40 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output or clock output (CLKO at 1/4 OSC1 frequency in RC mode); otherwise general purpose I/O pin RA6. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RB6/KBI2/PGC | bidirectional | Digital I/O (TTL input) with interrupt-on-change, and serves as in-circuit debugger and ICSP programming clock. |
| 43 | RB5/KBI1/PGM | bidirectional | Digital I/O (TTL input) with interrupt-on-change, and serves as low-voltage ICSP programming enable pin. |
| 44 | RB4/KBI0 | bidirectional | Digital I/O (TTL input) with interrupt-on-change. |
| 45 | RB3/INT3/CCP2 | bidirectional | Digital I/O (TTL input) that serves as external interrupt 3 and CCP2 capture input/compare output/PWM 2 output. |
| 46 | RB2/INT2 | bidirectional | Digital I/O (TTL input) that serves as external interrupt 2. |
| 47 | RB1/INT1 | bidirectional | Digital I/O (TTL input) that serves as external interrupt 1. |
| 48 | RB0/INT0 | bidirectional | Digital I/O (TTL input) that serves as external interrupt 0. |
| 49 | RD7/PSP7/AD7 | bidirectional | Digital I/O (ST input) that serves as Parallel Slave Port data bit 7. |
| 50 | RD6/PSP6/AD6 | bidirectional | Digital I/O (ST input) that serves as Parallel Slave Port data bit 6. |
| 51 | RD5/PSP5/AD5 | bidirectional | Digital I/O (ST input) that serves as Parallel Slave Port data bit 5. |
| 52 | RD4/PSP4/AD4 | bidirectional | Digital I/O (ST input) that serves as Parallel Slave Port data bit 4. |
| 53 | RD3/PSP3/AD3 | bidirectional | Digital I/O (ST input) that serves as Parallel Slave Port data bit 3. |
| 54 | RD2/PSP2/AD2 | bidirectional | Digital I/O (ST input) that serves as Parallel Slave Port data bit 2. |
| 55 | RD1/PSP1/AD1 | bidirectional | Digital I/O (ST input) that serves as Parallel Slave Port data bit 1. |
| 56 | VSS | power_in | Ground reference for logic and I/O pins. |
| 57 | VDD | power_in | Positive supply for logic and I/O pins; device operating range is stated as 2.0V to 5.5V. |
| 58 | RD0/PSP0/AD0 | bidirectional | Digital I/O (ST input) that serves as Parallel Slave Port data bit 0. |
| 59 | RE7/CCP2/AD15 | bidirectional | Digital I/O (ST input) that serves as CCP2 capture input/compare output/PWM 2 output (default assignment when CCP2MX is set). |
| 60 | RE6/AD14/P1B | bidirectional | Digital I/O (ST input) that serves as ECCP1 PWM output B. |
| 61 | RE5/AD13/P1C | bidirectional | Digital I/O (ST input) that serves as ECCP1 PWM output C. |
| 62 | RE4/AD12 | bidirectional | General purpose digital I/O with Schmitt Trigger input buffer. |
| 63 | RE3/AD11 | bidirectional | General purpose digital I/O with Schmitt Trigger input buffer. |
| 64 | RE2/CS/AD10 | bidirectional | Digital I/O (ST input) that serves as Parallel Slave Port chip select control (see RD and WR). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature (industrial) | TA | -40 | 85 | °C | Industrial range (-I), PIC18FXX8X | 416 | |
| Maximum operating frequency | FMAX | 40 | MHz | PIC18F6X8X in Microcontroller mode (Figure 27-1 note) | 414 | ||
| Supply Voltage (PIC18FXX8X) | VDD | 4.2 | 5.5 | V | 416 | ||
| RAM Data Retention Voltage | VDR | 1.5 | V | 416 | |||
| VDD Start Voltage to ensure internal Power-on Reset signal | VPOR | 0.7 | V | See section on Power-on Reset for details | 416 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 416 | ||
| Brown-out Reset Voltage | VBOR | 1.96 | 2.18 | V | BORV1:BORV0 = 11 | 416 | |
| Brown-out Reset Voltage | VBOR | 2.64 | 2.92 | V | BORV1:BORV0 = 10 | 416 | |
| Brown-out Reset Voltage | VBOR | 4.11 | 4.55 | V | BORV1:BORV0 = 01 | 416 | |
| Brown-out Reset Voltage | VBOR | 4.41 | 4.87 | V | BORV1:BORV0 = 00 | 416 | |
| Power-down current (Sleep mode), all devices | IPD | 0.7 | 2 | µA | VDD = 5.0V, Sleep mode, -40°C | 417 | |
| Power-down current (Sleep mode), all devices | IPD | 15 | 32 | µA | VDD = 5.0V, Sleep mode, +85°C | 417 | |
| Input Offset Voltage | VIOFF | -10 | 5 | 10 | mV | 3.0V < VDD < 5.5V, -40°C < TA < +125°C | 423 |
| Input Common Mode Voltage | VICM | 0 | V | 3.0V < VDD < 5.5V, -40°C < TA < +125°C | 423 | ||
| Common Mode Rejection Ratio | CMRR | 55 | dB | 3.0V < VDD < 5.5V, -40°C < TA < +125°C | 423 | ||
| Comparator Response Time | TRESP | 150 | 400 | ns | 3.0V < VDD < 5.5V, -40°C < TA < +125°C; response measured with one comparator input at (VDD, 1.5)/2 while the other input transitions from VSS to VDD | 423 | |
| Comparator Mode Change to Output Valid | TMC2OV | 10 | µs | 3.0V < VDD < 5.5V, -40°C < TA < +125°C | 423 | ||
| Settling Time | TSET | 10 | µs | Settling time measured while VRR = 1 and VR<3:0> transitions from 0000 to 1111 | 423 | ||
| Voltage on any pin with respect to VSS (except VDD, MCLR, and RA4) | -0.3 | V | Maximum is VDD + 0.3V | 413 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 5.5 | V | 413 | ||
| Voltage on MCLR with respect to VSS | 0 | 13.25 | V | Note 2 | 413 | ||
| Voltage on RA4 with respect to VSS | 0 | 8.5 | V | 413 | |||
| Ambient temperature under bias | -40 | 125 | °C | 413 | |||
| Storage temperature | -65 | 150 | °C | 413 | |||
| Total power dissipation | 1 | W | Note 1 | 413 | |||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 413 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 413 | ||
| Maximum output current sunk by any I/O pin | 25 | mA | 413 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 413 |
CAD (KiCad official)
- Symbol:
PIC18F6680-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic18f6680-i-pt-etched.step/pic18f6680-i-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f6680-i-pt.step/pic18f6680-i-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (496 pp, sha256
5c4715feca48de4c, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).