Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18F6680-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)

PIC18F6680-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE1/WR/AD9 bidirectional Digital I/O (ST input) that serves as the Parallel Slave Port write control (see CS and RD pins) when PSP is enabled.
2 RE0/RD/AD8 bidirectional Digital I/O (ST input) that serves as the Parallel Slave Port read control (see WR and CS pins) when PSP is enabled.
3 RG0/CANTX1 bidirectional Digital I/O (ST input) that serves as the CAN bus transmit 1 output.
4 RG1/CANTX2 bidirectional Digital I/O (ST input) that serves as the CAN bus transmit 2 output.
5 RG2/CANRX bidirectional Digital I/O (ST input) that serves as the CAN bus receive input.
6 RG3 bidirectional General purpose digital I/O with Schmitt Trigger input buffer.
7 RG5/MCLR/VPP input Active-low Master Clear (Reset) input to the device, or programming voltage input; RG5 alone is a general purpose input-only pin.
8 RG4/P1D bidirectional Digital I/O (ST input) that also serves as ECCP1 PWM output D.
9 VSS power_in Ground reference for logic and I/O pins.
10 VDD power_in Positive supply for logic and I/O pins; device operating range is stated as 2.0V to 5.5V.
11 RF7/SS bidirectional Digital I/O (ST input) that serves as the SPI slave select input (TTL).
12 RF6/AN11/C1IN- bidirectional Digital I/O (ST input) that serves as analog input 11 and comparator 1 input (-).
13 RF5/AN10/C1IN+/CVREF bidirectional Digital I/O (ST input) that serves as analog input 10, comparator 1 input (+), and comparator voltage reference output (CVREF).
14 RF4/AN9/C2IN- bidirectional Digital I/O (ST input) that serves as analog input 9 and comparator 2 input (-).
15 RF3/AN8/C2IN+ bidirectional Digital I/O (ST input) that serves as analog input 8 and comparator 2 input (+).
16 RF2/AN7/C1OUT bidirectional Digital I/O (ST input) that serves as analog input 7 and comparator 1 output.
17 RF1/AN6/C2OUT bidirectional Digital I/O (ST input) that serves as analog input 6 and comparator 2 output.
18 RF0/AN5 bidirectional Digital I/O (ST input) that serves as analog input 5.
19 AVDD power_in Positive supply for analog modules.
20 AVSS power_in Ground reference for analog modules.
21 RA3/AN3/VREF+ bidirectional Digital I/O (TTL) that serves as analog input 3 and the A/D reference voltage (high) input.
22 RA2/AN2/VREF- bidirectional Digital I/O (TTL) that serves as analog input 2 and the A/D reference voltage (low) input.
23 RA1/AN1 bidirectional Digital I/O (TTL) that serves as analog input 1.
24 RA0/AN0 bidirectional Digital I/O (TTL) that serves as analog input 0.
25 VSS power_in Ground reference for logic and I/O pins.
26 VDD power_in Positive supply for logic and I/O pins; device operating range is stated as 2.0V to 5.5V.
27 RA5/AN4/LVDIN bidirectional Digital I/O (TTL) that serves as analog input 4 and the low-voltage detect input (LVDIN).
28 RA4/T0CKI bidirectional Digital I/O (Schmitt Trigger input, open-drain when configured as output) that serves as the Timer0 external clock input.
29 RC1/T1OSI/CCP2 bidirectional Digital I/O (ST input) that serves as Timer1 oscillator input and CCP2 capture input/compare output/PWM 2 output, depending on CCP2MX setting.
30 RC0/T1OSO/T13CKI bidirectional Digital I/O (ST input) that serves as Timer1 oscillator output and Timer1/Timer3 external clock input.
31 RC6/TX/CK bidirectional Digital I/O (ST input) that serves as USART asynchronous transmit output or USART synchronous clock.
32 RC7/RX/DT bidirectional Digital I/O (ST input) that serves as USART asynchronous receive input or USART synchronous data.
33 RC2/CCP1/P1A bidirectional Digital I/O (ST input) that serves as CCP1 capture input/compare output and CCP1 PWM output A.
34 RC3/SCK/SCL bidirectional Digital I/O (ST input) that serves as synchronous serial clock input/output for SPI mode and I2C mode (SCL).
35 RC4/SDI/SDA bidirectional Digital I/O (ST input) that serves as SPI data input and I2C data I/O (SDA).
36 RC5/SDO bidirectional Digital I/O (ST input) that serves as SPI data output.
37 RB7/KBI3/PGD bidirectional Digital I/O (TTL input) with interrupt-on-change, and serves as in-circuit debugger and ICSP programming data.
38 VDD power_in Positive supply for logic and I/O pins; device operating range is stated as 2.0V to 5.5V.
39 OSC1/CLKI input Oscillator crystal input or external clock source input (CMOS; ST buffer when configured in RC mode).
40 OSC2/CLKO/RA6 bidirectional Oscillator crystal output or clock output (CLKO at 1/4 OSC1 frequency in RC mode); otherwise general purpose I/O pin RA6.
41 VSS power_in Ground reference for logic and I/O pins.
42 RB6/KBI2/PGC bidirectional Digital I/O (TTL input) with interrupt-on-change, and serves as in-circuit debugger and ICSP programming clock.
43 RB5/KBI1/PGM bidirectional Digital I/O (TTL input) with interrupt-on-change, and serves as low-voltage ICSP programming enable pin.
44 RB4/KBI0 bidirectional Digital I/O (TTL input) with interrupt-on-change.
45 RB3/INT3/CCP2 bidirectional Digital I/O (TTL input) that serves as external interrupt 3 and CCP2 capture input/compare output/PWM 2 output.
46 RB2/INT2 bidirectional Digital I/O (TTL input) that serves as external interrupt 2.
47 RB1/INT1 bidirectional Digital I/O (TTL input) that serves as external interrupt 1.
48 RB0/INT0 bidirectional Digital I/O (TTL input) that serves as external interrupt 0.
49 RD7/PSP7/AD7 bidirectional Digital I/O (ST input) that serves as Parallel Slave Port data bit 7.
50 RD6/PSP6/AD6 bidirectional Digital I/O (ST input) that serves as Parallel Slave Port data bit 6.
51 RD5/PSP5/AD5 bidirectional Digital I/O (ST input) that serves as Parallel Slave Port data bit 5.
52 RD4/PSP4/AD4 bidirectional Digital I/O (ST input) that serves as Parallel Slave Port data bit 4.
53 RD3/PSP3/AD3 bidirectional Digital I/O (ST input) that serves as Parallel Slave Port data bit 3.
54 RD2/PSP2/AD2 bidirectional Digital I/O (ST input) that serves as Parallel Slave Port data bit 2.
55 RD1/PSP1/AD1 bidirectional Digital I/O (ST input) that serves as Parallel Slave Port data bit 1.
56 VSS power_in Ground reference for logic and I/O pins.
57 VDD power_in Positive supply for logic and I/O pins; device operating range is stated as 2.0V to 5.5V.
58 RD0/PSP0/AD0 bidirectional Digital I/O (ST input) that serves as Parallel Slave Port data bit 0.
59 RE7/CCP2/AD15 bidirectional Digital I/O (ST input) that serves as CCP2 capture input/compare output/PWM 2 output (default assignment when CCP2MX is set).
60 RE6/AD14/P1B bidirectional Digital I/O (ST input) that serves as ECCP1 PWM output B.
61 RE5/AD13/P1C bidirectional Digital I/O (ST input) that serves as ECCP1 PWM output C.
62 RE4/AD12 bidirectional General purpose digital I/O with Schmitt Trigger input buffer.
63 RE3/AD11 bidirectional General purpose digital I/O with Schmitt Trigger input buffer.
64 RE2/CS/AD10 bidirectional Digital I/O (ST input) that serves as Parallel Slave Port chip select control (see RD and WR).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating temperature (industrial) TA -40 85 °C Industrial range (-I), PIC18FXX8X 416
Maximum operating frequency FMAX 40 MHz PIC18F6X8X in Microcontroller mode (Figure 27-1 note) 414
Supply Voltage (PIC18FXX8X) VDD 4.2 5.5 V 416
RAM Data Retention Voltage VDR 1.5 V 416
VDD Start Voltage to ensure internal Power-on Reset signal VPOR 0.7 V See section on Power-on Reset for details 416
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See section on Power-on Reset for details 416
Brown-out Reset Voltage VBOR 1.96 2.18 V BORV1:BORV0 = 11 416
Brown-out Reset Voltage VBOR 2.64 2.92 V BORV1:BORV0 = 10 416
Brown-out Reset Voltage VBOR 4.11 4.55 V BORV1:BORV0 = 01 416
Brown-out Reset Voltage VBOR 4.41 4.87 V BORV1:BORV0 = 00 416
Power-down current (Sleep mode), all devices IPD 0.7 2 µA VDD = 5.0V, Sleep mode, -40°C 417
Power-down current (Sleep mode), all devices IPD 15 32 µA VDD = 5.0V, Sleep mode, +85°C 417
Input Offset Voltage VIOFF -10 5 10 mV 3.0V < VDD < 5.5V, -40°C < TA < +125°C 423
Input Common Mode Voltage VICM 0 V 3.0V < VDD < 5.5V, -40°C < TA < +125°C 423
Common Mode Rejection Ratio CMRR 55 dB 3.0V < VDD < 5.5V, -40°C < TA < +125°C 423
Comparator Response Time TRESP 150 400 ns 3.0V < VDD < 5.5V, -40°C < TA < +125°C; response measured with one comparator input at (VDD, 1.5)/2 while the other input transitions from VSS to VDD 423
Comparator Mode Change to Output Valid TMC2OV 10 µs 3.0V < VDD < 5.5V, -40°C < TA < +125°C 423
Settling Time TSET 10 µs Settling time measured while VRR = 1 and VR<3:0> transitions from 0000 to 1111 423
Voltage on any pin with respect to VSS (except VDD, MCLR, and RA4) -0.3 V Maximum is VDD + 0.3V 413
Voltage on VDD with respect to VSS VDD -0.3 5.5 V 413
Voltage on MCLR with respect to VSS 0 13.25 V Note 2 413
Voltage on RA4 with respect to VSS 0 8.5 V 413
Ambient temperature under bias -40 125 °C 413
Storage temperature -65 150 °C 413
Total power dissipation 1 W Note 1 413
Input clamp current IIK 20 mA VI < 0 or VI > VDD 413
Output clamp current IOK 20 mA VO < 0 or VO > VDD 413
Maximum output current sunk by any I/O pin 25 mA 413
Maximum output current sourced by any I/O pin 25 mA 413

CAD (KiCad official)

  • Symbol: PIC18F6680-I
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic18f6680-i-pt-etched.step / pic18f6680-i-pt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f6680-i-pt.step / pic18f6680-i-pt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (496 pp, sha256 5c4715feca48de4c, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF